Message ID | 20210713130538.646-7-a-nandan@ti.com |
---|---|
State | New |
Headers | show |
Series | [01/13] spi: spi-mem: Add DTR templates for cmd, address, dummy and data phase | expand |
Hi Apurva, Apurva Nandan <a-nandan@ti.com> wrote on Tue, 13 Jul 2021 13:05:31 +0000: > Define new PAGE_READ_FROM_CACHE and PROG_LOAD op templates for Octal > DTR SPI mode. These templates would used in op_variants and will be > op_templates for defining Octal DTR read from cache and write to > cache operations. > > Datasheet: https://www.winbond.com/export/sites/winbond/datasheet/W35N01JW_Datasheet_Brief.pdf > > Signed-off-by: Apurva Nandan <a-nandan@ti.com> > --- > include/linux/mtd/spinand.h | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h > index ebb19b2cec84..35816b8cfe81 100644 > --- a/include/linux/mtd/spinand.h > +++ b/include/linux/mtd/spinand.h > @@ -122,6 +122,12 @@ > SPI_MEM_OP_DUMMY(ndummy, 4), \ > SPI_MEM_OP_DATA_IN(len, buf, 4)) > > +#define SPINAND_PAGE_READ_FROM_CACHE_OCTALIO_DTR_OP(addr, ndummy, buf, len) \ > + SPI_MEM_OP(SPI_MEM_OP_CMD_DTR(2, 0x9d9d, 8), \ > + SPI_MEM_OP_ADDR_DTR(2, addr, 8), \ > + SPI_MEM_OP_DUMMY_DTR(ndummy, 8), \ > + SPI_MEM_OP_DATA_IN_DTR(len, buf, 8)) > + > #define SPINAND_PROG_EXEC_OP(addr) \ > SPI_MEM_OP(SPI_MEM_OP_CMD(0x10, 1), \ > SPI_MEM_OP_ADDR(3, addr, 1), \ > @@ -140,6 +146,12 @@ > SPI_MEM_OP_NO_DUMMY, \ > SPI_MEM_OP_DATA_OUT(len, buf, 4)) > > +#define SPINAND_PROG_LOAD_OCTALIO_DTR(reset, addr, buf, len) \ > + SPI_MEM_OP(SPI_MEM_OP_CMD_DTR(2, reset ? 0x0202 : 0x8484, 8), \ > + SPI_MEM_OP_ADDR_DTR(2, addr, 8), \ > + SPI_MEM_OP_NO_DUMMY, \ > + SPI_MEM_OP_DATA_OUT_DTR(len, buf, 8)) > + > #define SPINAND_PROTO_BUSWIDTH_MASK GENMASK(6, 0) > #define SPINAND_PROTO_DTR_BIT BIT(7) > Thanks, Miquèl
Hi Miquèl, On 07/08/21 12:24 am, Miquel Raynal wrote: > Hi Apurva, > > Apurva Nandan <a-nandan@ti.com> wrote on Tue, 13 Jul 2021 13:05:31 > +0000: > >> Define new PAGE_READ_FROM_CACHE and PROG_LOAD op templates for Octal >> DTR SPI mode. These templates would used in op_variants and > > will be > Yeah, ok! >> op_templates for defining Octal DTR read from cache and write to >> cache operations. >> >> Datasheet: https://www.winbond.com/export/sites/winbond/datasheet/W35N01JW_Datasheet_Brief.pdf >> >> Signed-off-by: Apurva Nandan <a-nandan@ti.com> >> --- >> include/linux/mtd/spinand.h | 12 ++++++++++++ >> 1 file changed, 12 insertions(+) >> >> diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h >> index ebb19b2cec84..35816b8cfe81 100644 >> --- a/include/linux/mtd/spinand.h >> +++ b/include/linux/mtd/spinand.h >> @@ -122,6 +122,12 @@ >> SPI_MEM_OP_DUMMY(ndummy, 4), \ >> SPI_MEM_OP_DATA_IN(len, buf, 4)) >> >> +#define SPINAND_PAGE_READ_FROM_CACHE_OCTALIO_DTR_OP(addr, ndummy, buf, len) \ >> + SPI_MEM_OP(SPI_MEM_OP_CMD_DTR(2, 0x9d9d, 8), \ >> + SPI_MEM_OP_ADDR_DTR(2, addr, 8), \ >> + SPI_MEM_OP_DUMMY_DTR(ndummy, 8), \ >> + SPI_MEM_OP_DATA_IN_DTR(len, buf, 8)) >> + >> #define SPINAND_PROG_EXEC_OP(addr) \ >> SPI_MEM_OP(SPI_MEM_OP_CMD(0x10, 1), \ >> SPI_MEM_OP_ADDR(3, addr, 1), \ >> @@ -140,6 +146,12 @@ >> SPI_MEM_OP_NO_DUMMY, \ >> SPI_MEM_OP_DATA_OUT(len, buf, 4)) >> >> +#define SPINAND_PROG_LOAD_OCTALIO_DTR(reset, addr, buf, len) \ >> + SPI_MEM_OP(SPI_MEM_OP_CMD_DTR(2, reset ? 0x0202 : 0x8484, 8), \ >> + SPI_MEM_OP_ADDR_DTR(2, addr, 8), \ >> + SPI_MEM_OP_NO_DUMMY, \ >> + SPI_MEM_OP_DATA_OUT_DTR(len, buf, 8)) >> + >> #define SPINAND_PROTO_BUSWIDTH_MASK GENMASK(6, 0) >> #define SPINAND_PROTO_DTR_BIT BIT(7) >> > > Thanks, > Miquèl > > ______________________________________________________ > Linux MTD discussion mailing list > http://lists.infradead.org/mailman/listinfo/linux-mtd/ > Thanks, Apurva Nandan
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h index ebb19b2cec84..35816b8cfe81 100644 --- a/include/linux/mtd/spinand.h +++ b/include/linux/mtd/spinand.h @@ -122,6 +122,12 @@ SPI_MEM_OP_DUMMY(ndummy, 4), \ SPI_MEM_OP_DATA_IN(len, buf, 4)) +#define SPINAND_PAGE_READ_FROM_CACHE_OCTALIO_DTR_OP(addr, ndummy, buf, len) \ + SPI_MEM_OP(SPI_MEM_OP_CMD_DTR(2, 0x9d9d, 8), \ + SPI_MEM_OP_ADDR_DTR(2, addr, 8), \ + SPI_MEM_OP_DUMMY_DTR(ndummy, 8), \ + SPI_MEM_OP_DATA_IN_DTR(len, buf, 8)) + #define SPINAND_PROG_EXEC_OP(addr) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0x10, 1), \ SPI_MEM_OP_ADDR(3, addr, 1), \ @@ -140,6 +146,12 @@ SPI_MEM_OP_NO_DUMMY, \ SPI_MEM_OP_DATA_OUT(len, buf, 4)) +#define SPINAND_PROG_LOAD_OCTALIO_DTR(reset, addr, buf, len) \ + SPI_MEM_OP(SPI_MEM_OP_CMD_DTR(2, reset ? 0x0202 : 0x8484, 8), \ + SPI_MEM_OP_ADDR_DTR(2, addr, 8), \ + SPI_MEM_OP_NO_DUMMY, \ + SPI_MEM_OP_DATA_OUT_DTR(len, buf, 8)) + #define SPINAND_PROTO_BUSWIDTH_MASK GENMASK(6, 0) #define SPINAND_PROTO_DTR_BIT BIT(7)
Define new PAGE_READ_FROM_CACHE and PROG_LOAD op templates for Octal DTR SPI mode. These templates would used in op_variants and op_templates for defining Octal DTR read from cache and write to cache operations. Datasheet: https://www.winbond.com/export/sites/winbond/datasheet/W35N01JW_Datasheet_Brief.pdf Signed-off-by: Apurva Nandan <a-nandan@ti.com> --- include/linux/mtd/spinand.h | 12 ++++++++++++ 1 file changed, 12 insertions(+)