@@ -48,7 +48,9 @@
#define c13_TID_URO 26 /* Thread ID, User R/O */
#define c13_TID_PRIV 27 /* Thread ID, Privileged */
#define c14_CNTKCTL 28 /* Timer Control Register (PL1) */
-#define NR_CP15_REGS 29 /* Number of regs (incl. invalid) */
+#define c10_AMAIR0 29 /* Auxilary Memory Attribute Indirection Reg0 */
+#define c10_AMAIR1 30 /* Auxilary Memory Attribute Indirection Reg1 */
+#define NR_CP15_REGS 31 /* Number of regs (incl. invalid) */
#define ARM_EXCEPTION_RESET 0
#define ARM_EXCEPTION_UNDEFINED 1
@@ -113,6 +113,23 @@ done:
}
/*
+ * Generic accessor for VM registers. Only called as long as HCR_TVM
+ * is set.
+ */
+static bool access_vm_reg(struct kvm_vcpu *vcpu,
+ const struct coproc_params *p,
+ const struct coproc_reg *r)
+{
+ BUG_ON(!p->is_write);
+
+ vcpu->arch.cp15[r->reg] = *vcpu_reg(vcpu, p->Rt1);
+ if (p->is_64bit)
+ vcpu->arch.cp15[r->reg + 1] = *vcpu_reg(vcpu, p->Rt2);
+
+ return true;
+}
+
+/*
* We could trap ID_DFR0 and tell the guest we don't support performance
* monitoring. Unfortunately the patch to make the kernel check ID_DFR0 was
* NAKed, so it will read the PMCR anyway.
@@ -217,6 +234,12 @@ static const struct coproc_reg cp15_regs[] = {
{ CRn(10), CRm( 2), Op1( 0), Op2( 1), is32,
NULL, reset_unknown, c10_NMRR},
+ /* AMAIR0/AMAIR1: swapped by interrupt.S. */
+ { CRn(10), CRm( 3), Op1( 0), Op2( 0), is32,
+ access_vm_reg, reset_unknown, c10_AMAIR0},
+ { CRn(10), CRm( 3), Op1( 0), Op2( 1), is32,
+ access_vm_reg, reset_unknown, c10_AMAIR1},
+
/* VBAR: swapped by interrupt.S. */
{ CRn(12), CRm( 0), Op1( 0), Op2( 0), is32,
NULL, reset_val, c12_VBAR, 0x00000000 },
@@ -303,13 +303,17 @@ vcpu .req r0 @ vcpu pointer always in r0
mrc p15, 0, r2, c14, c1, 0 @ CNTKCTL
mrrc p15, 0, r4, r5, c7 @ PAR
+ mrc p15, 0, r6, c10, c3, 0 @ AMAIR0
+ mrc p15, 0, r7, c10, c3, 1 @ AMAIR1
.if \store_to_vcpu == 0
- push {r2,r4-r5}
+ push {r2,r4-r7}
.else
str r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)]
add r12, vcpu, #CP15_OFFSET(c7_PAR)
strd r4, r5, [r12]
+ str r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)]
+ str r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)]
.endif
.endm
@@ -322,15 +326,19 @@ vcpu .req r0 @ vcpu pointer always in r0
*/
.macro write_cp15_state read_from_vcpu
.if \read_from_vcpu == 0
- pop {r2,r4-r5}
+ pop {r2,r4-r7}
.else
ldr r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)]
add r12, vcpu, #CP15_OFFSET(c7_PAR)
ldrd r4, r5, [r12]
+ ldr r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)]
+ ldr r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)]
.endif
mcr p15, 0, r2, c14, c1, 0 @ CNTKCTL
mcrr p15, 0, r4, r5, c7 @ PAR
+ mcr p15, 0, r6, c10, c3, 0 @ AMAIR0
+ mcr p15, 0, r7, c10, c3, 1 @ AMAIR1
.if \read_from_vcpu == 0
pop {r2-r12}