@@ -16,6 +16,7 @@ config ARM64
select ARM_AMBA
select ARM_ARCH_TIMER
select ARM_GIC
+ select ARM_GIC_ACPI if ACPI
select AUDIT_ARCH_COMPAT_GENERIC
select ARM_GIC_V2M if PCI_MSI
select ARM_GIC_V3
@@ -32,6 +32,9 @@ void __init acpi_irqchip_init(void)
if (acpi_disabled)
return;
+ if (acpi_gic_version_init())
+ return;
+
for (id = __irqchip_acpi_table; id->id[0]; id++)
acpi_table_parse(id->id, (acpi_tbl_table_handler)id->data);
}
@@ -46,6 +46,9 @@ config ARM_VIC_NR
The maximum number of VICs available in the system, for
power management.
+config ARM_GIC_ACPI
+ bool
+
config ATMEL_AIC_IRQ
bool
select GENERIC_IRQ_CHIP
@@ -23,6 +23,7 @@ obj-$(CONFIG_ARM_GIC) += irq-gic.o irq-gic-common.o
obj-$(CONFIG_ARM_GIC_V2M) += irq-gic-v2m.o
obj-$(CONFIG_ARM_GIC_V3) += irq-gic-v3.o irq-gic-common.o
obj-$(CONFIG_ARM_GIC_V3_ITS) += irq-gic-v3-its.o
+obj-$(CONFIG_ARM_GIC_ACPI) += irq-gic-acpi.o
obj-$(CONFIG_ARM_NVIC) += irq-nvic.o
obj-$(CONFIG_ARM_VIC) += irq-vic.o
obj-$(CONFIG_ATMEL_AIC_IRQ) += irq-atmel-aic-common.o irq-atmel-aic.o
new file mode 100644
@@ -0,0 +1,111 @@
+/*
+ * ACPI based support for ARM GIC init
+ *
+ * Copyright (C) 2013-2015, Linaro Ltd.
+ * Author: Hanjun Guo <hanjun.guo@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "ACPI: GIC: " fmt
+
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/irqchip/arm-gic-v3.h>
+#include <linux/irqchip/arm-gic-acpi.h>
+
+/* GIC version presented in MADT GIC distributor structure */
+static u8 gic_version __initdata = ACPI_MADT_GIC_VER_UNKNOWN;
+
+static phys_addr_t dist_phy_base __initdata;
+
+static int __init
+acpi_gic_parse_distributor(struct acpi_subtable_header *header,
+ const unsigned long end)
+{
+ struct acpi_madt_generic_distributor *dist;
+
+ dist = (struct acpi_madt_generic_distributor *)header;
+
+ if (BAD_MADT_ENTRY(dist, end))
+ return -EINVAL;
+
+ gic_version = dist->gic_version;
+ dist_phy_base = dist->base_address;
+ return 0;
+}
+
+static int __init
+match_gic_redist(struct acpi_subtable_header *header, const unsigned long end)
+{
+ return 0;
+}
+
+static bool __init acpi_gic_redist_is_present(void)
+{
+ int count;
+
+ /* scan MADT table to find if we have redistributor entries */
+ count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR,
+ match_gic_redist, 0);
+
+ /* has at least one GIC redistributor entry */
+ if (count > 0)
+ return true;
+ else
+ return false;
+}
+
+int __init acpi_gic_version_init(void)
+{
+ int count;
+ void __iomem *dist_base;
+ u32 reg;
+
+ count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR,
+ acpi_gic_parse_distributor, 0);
+
+ if (count <= 0) {
+ pr_err("No valid GIC distributor entry exists\n");
+ return -ENODEV;
+ }
+
+ if (gic_version >= ACPI_MADT_GIC_VER_RESERVED) {
+ pr_err("Invalid GIC version %d in MADT\n", gic_version);
+ return -EINVAL;
+ }
+
+ /*
+ * when the GIC version is 0, we fallback to hardware discovery.
+ * this is also needed to keep compatiable with ACPI 5.1,
+ * which has no gic_version field in distributor structure and
+ * reserved as 0.
+ *
+ * For hardware discovery, the offset for GICv1/2 and GICv3/4 to
+ * get the GIC version is different (0xFE8 for GICv1/2 and 0xFFE8
+ * for GICv3/4), so we need to handle it separately.
+ */
+ if (gic_version == ACPI_MADT_GIC_VER_UNKNOWN) {
+ /* it's GICv3/v4 if redistributor is present */
+ if (acpi_gic_redist_is_present()) {
+ dist_base = ioremap(dist_phy_base,
+ ACPI_GICV3_DIST_MEM_SIZE);
+ if (!dist_base)
+ return -ENOMEM;
+
+ reg = readl_relaxed(dist_base + GICD_PIDR2) & GIC_PIDR2_ARCH_MASK;
+ if (reg == GIC_PIDR2_ARCH_GICv3)
+ gic_version = ACPI_MADT_GIC_VER_V3;
+ else
+ gic_version = ACPI_MADT_GIC_VER_V4;
+
+ iounmap(dist_base);
+ } else {
+ gic_version = ACPI_MADT_GIC_VER_V2;
+ }
+ }
+
+ return 0;
+}
@@ -19,11 +19,13 @@
*/
#define ACPI_GICV2_DIST_MEM_SIZE (SZ_4K)
#define ACPI_GIC_CPU_IF_MEM_SIZE (SZ_8K)
+#define ACPI_GICV3_DIST_MEM_SIZE (SZ_64K)
struct acpi_table_header;
int gic_v2_acpi_init(struct acpi_table_header *table);
void acpi_gic_init(void);
+int acpi_gic_version_init(void);
#else
static inline void acpi_gic_init(void) { }
#endif
There is a field added in ACPI MADT table to indicate the GIC version, so parse the table to get its value for later use. If GIC version presented in MADT is 0, we need to fallback to hardware discovery to get the GIC version. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> --- arch/arm64/Kconfig | 1 + drivers/acpi/irq.c | 3 + drivers/irqchip/Kconfig | 3 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-gic-acpi.c | 111 +++++++++++++++++++++++++++++++++++ include/linux/irqchip/arm-gic-acpi.h | 2 + 6 files changed, 121 insertions(+) create mode 100644 drivers/irqchip/irq-gic-acpi.c