diff mbox series

[3/3] ath11k: Align bss_chan_info structure with firmware

Message ID 20210720214922.118078-3-jouni@codeaurora.org
State New
Headers show
Series None | expand

Commit Message

Jouni Malinen July 20, 2021, 9:49 p.m. UTC 
From: Seevalamuthu Mariappan <seevalam@codeaurora.org>

pdev_id in structure 'wmi_pdev_bss_chan_info_event' is wrongly placed
at the beginning. This causes invalid values in survey dump. Hence, align
the structure with the firmware.

Note: The firmware releases follow this order since the feature was
implemented. Also, it is not changing across the branches including
QCA6390.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1

Signed-off-by: Ritesh Singh <ritesi@codeaurora.org>
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/wmi.c | 1 +
 drivers/net/wireless/ath/ath11k/wmi.h | 3 ++-
 2 files changed, 3 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index a53783229520..e3d11a0a7b7c 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -1339,6 +1339,7 @@  int ath11k_wmi_pdev_bss_chan_info_request(struct ath11k *ar,
 				     WMI_TAG_PDEV_BSS_CHAN_INFO_REQUEST) |
 			  FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE);
 	cmd->req_type = type;
+	cmd->pdev_id = ar->pdev->pdev_id;
 
 	ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
 		   "WMI bss chan info req type %d\n", type);
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 78849f0255fa..799b3bd96a27 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -2962,6 +2962,7 @@  struct wmi_pdev_bss_chan_info_req_cmd {
 	u32 tlv_header;
 	/* ref wmi_bss_chan_info_req_type */
 	u32 req_type;
+	u32 pdev_id;
 } __packed;
 
 struct wmi_ap_ps_peer_cmd {
@@ -4058,7 +4059,6 @@  struct wmi_vdev_stopped_event {
 } __packed;
 
 struct wmi_pdev_bss_chan_info_event {
-	u32 pdev_id;
 	u32 freq;	/* Units in MHz */
 	u32 noise_floor;	/* units are dBm */
 	/* rx clear - how often the channel was unused */
@@ -4076,6 +4076,7 @@  struct wmi_pdev_bss_chan_info_event {
 	/*rx_cycle cnt for my bss in 64bits format */
 	u32 rx_bss_cycle_count_low;
 	u32 rx_bss_cycle_count_high;
+	u32 pdev_id;
 } __packed;
 
 #define WMI_VDEV_INSTALL_KEY_COMPL_STATUS_SUCCESS 0