From patchwork Wed Jul 21 11:52:30 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sai Krishna Potthuri X-Patchwork-Id: 483588 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.6 required=3.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 36231C636CA for ; Wed, 21 Jul 2021 12:02:20 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 080F3611C1 for ; Wed, 21 Jul 2021 12:02:20 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238513AbhGULVX (ORCPT ); Wed, 21 Jul 2021 07:21:23 -0400 Received: from mail-co1nam11on2054.outbound.protection.outlook.com ([40.107.220.54]:14665 "EHLO NAM11-CO1-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S238592AbhGULOL (ORCPT ); Wed, 21 Jul 2021 07:14:11 -0400 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=g9Hli6iOdCNvhMe+HfLrEWX7Oy15XwLrzCruCWLpDlh4DqjwDCLI8xYfxdewaijXxrb6WAO2dE1J2ESMgRxYAlYgtjoUWR8c8EmIVIMsrmVj5dXjt0ypoemM+6vsKHJD1owjl2XQtWgSumgaRLMQsdYmj2onOGMWMXyVUABKu67kNpXTOGRcZac+/pLF1C3a4zWdrInwunzChqWyYC4SOBl9SZskGHB4laxcuXvxNjKOxJqgCUDkxG02iE0Z1krvQ2Cuprw6Z1j3Vcigr+fImn3mEt/qos/jSEIS1IBMAoJnl/USGTc3fChJ2u+qctb53/wIdX3k1+6pYAdnud32PA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=+hotZynpJxorOnJot3OxUKgpm8VPNYEdnigjaza1TwI=; b=YZrybYgBqdZv1g/wkOltW7U3qYJ3zGxMp5OBu5sT8OeVeiWETPw07S3WsiWao3EcKkzGqtIow15JVRSNr7Cc9j79Plro1qLmTzVA++SygxyDxPkSh9yxryw6CQUAYHFwxVgo0P+m0/zDKqPKuy6f/zqDeNMdzB1S1wq/jFrhKBRrBABYmJoXsGo0wSCN/ziihdaiAcv08fWHxdUS601hoOxcTkl0CVgkShHf4Pv5BgVc00/f73TidNwpsOCUsEBtfvJuEHZERA9uF3yBvIHVM9KUqlqhPcViWTHHhSQyxgfwQc/GgnZu/3RpDZsPM+NKncQcRWH09orXOrRt/EFBFg== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 149.199.62.198) smtp.rcpttodomain=gmail.com smtp.mailfrom=xilinx.com; dmarc=pass (p=none sp=none pct=100) action=none header.from=xilinx.com; dkim=none (message not signed); arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=xilinx.onmicrosoft.com; s=selector2-xilinx-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=+hotZynpJxorOnJot3OxUKgpm8VPNYEdnigjaza1TwI=; b=FQAdMzR7u0gO2ruRM/vGYAWgvTmR/JycShlj8o87pS7NVZHk6J+MhKF+beBqW28sjIRas/lRpX1pDvfnFvH/xYymTgPMZEViruWUDbeMHB+6WagZAJ19SV5QjzxUoPYuOFyXKExSwkmUxxQ+o7d6jROzghxlxVKpiluFUzaAMzs= Received: from BN8PR12CA0022.namprd12.prod.outlook.com (2603:10b6:408:60::35) by BN7PR02MB5314.namprd02.prod.outlook.com (2603:10b6:408:2d::27) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4331.22; Wed, 21 Jul 2021 11:54:46 +0000 Received: from BN1NAM02FT003.eop-nam02.prod.protection.outlook.com (2603:10b6:408:60:cafe::79) by BN8PR12CA0022.outlook.office365.com (2603:10b6:408:60::35) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4331.22 via Frontend Transport; Wed, 21 Jul 2021 11:54:46 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 149.199.62.198) smtp.mailfrom=xilinx.com; gmail.com; dkim=none (message not signed) header.d=none; gmail.com; dmarc=pass action=none header.from=xilinx.com; Received-SPF: Pass (protection.outlook.com: domain of xilinx.com designates 149.199.62.198 as permitted sender) receiver=protection.outlook.com; client-ip=149.199.62.198; helo=xsj-pvapexch02.xlnx.xilinx.com; Received: from xsj-pvapexch02.xlnx.xilinx.com (149.199.62.198) by BN1NAM02FT003.mail.protection.outlook.com (10.13.2.122) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.20.4352.24 via Frontend Transport; Wed, 21 Jul 2021 11:54:46 +0000 Received: from xsj-pvapexch02.xlnx.xilinx.com (172.19.86.41) by xsj-pvapexch02.xlnx.xilinx.com (172.19.86.41) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2176.2; Wed, 21 Jul 2021 04:54:39 -0700 Received: from smtp.xilinx.com (172.19.127.95) by xsj-pvapexch02.xlnx.xilinx.com (172.19.86.41) with Microsoft SMTP Server id 15.1.2176.2 via Frontend Transport; Wed, 21 Jul 2021 04:54:39 -0700 Envelope-to: git@xilinx.com, saikrishna12468@gmail.com, robh+dt@kernel.org, linus.walleij@linaro.org, gregkh@linuxfoundation.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org Received: from [172.23.64.106] (port=50893 helo=xhdvnc125.xilinx.com) by smtp.xilinx.com with esmtp (Exim 4.90) (envelope-from ) id 1m6Ao9-0000yo-HJ; Wed, 21 Jul 2021 04:54:38 -0700 Received: by xhdvnc125.xilinx.com (Postfix, from userid 14964) id A9F3712102E; Wed, 21 Jul 2021 17:24:23 +0530 (IST) From: Sai Krishna Potthuri To: Linus Walleij , Rob Herring , Michal Simek , "Greg Kroah-Hartman" CC: , , , , , , Sai Krishna Potthuri Subject: [PATCH 1/4] dt-bindings: pinctrl: pinctrl-zynq: Convert to yaml Date: Wed, 21 Jul 2021 17:22:30 +0530 Message-ID: <1626868353-96475-2-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com> X-Mailer: git-send-email 2.1.1 In-Reply-To: <1626868353-96475-1-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com> References: <1626868353-96475-1-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com> MIME-Version: 1.0 X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: d9615950-9562-46d8-c122-08d94c3e55eb X-MS-TrafficTypeDiagnostic: BN7PR02MB5314: X-Microsoft-Antispam-PRVS: X-Auto-Response-Suppress: DR, RN, NRN, OOF, AutoReply X-MS-Oob-TLC-OOBClassifiers: OLM:2276; X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:149.199.62.198; CTRY:US; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:xsj-pvapexch02.xlnx.xilinx.com; PTR:unknown-62-198.xilinx.com; CAT:NONE; SFS:(4636009)(376002)(136003)(346002)(396003)(39860400002)(46966006)(36840700001)(2906002)(6266002)(7636003)(478600001)(30864003)(36906005)(316002)(42186006)(110136005)(2616005)(47076005)(36860700001)(70206006)(70586007)(26005)(356005)(186003)(54906003)(82740400003)(8936002)(8676002)(6666004)(36756003)(4326008)(83380400001)(966005)(336012)(426003)(82310400003)(5660300002)(107886003)(102446001); DIR:OUT; SFP:1101; X-OriginatorOrg: xilinx.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 21 Jul 2021 11:54:46.1513 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: d9615950-9562-46d8-c122-08d94c3e55eb X-MS-Exchange-CrossTenant-Id: 657af505-d5df-48d0-8300-c31994686c5c X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=657af505-d5df-48d0-8300-c31994686c5c; Ip=[149.199.62.198]; Helo=[xsj-pvapexch02.xlnx.xilinx.com] X-MS-Exchange-CrossTenant-AuthSource: BN1NAM02FT003.eop-nam02.prod.protection.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: BN7PR02MB5314 Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Convert the Zynq pinctrl binding file to yaml. Signed-off-by: Sai Krishna Potthuri Reviewed-by: Rob Herring --- .../bindings/pinctrl/xlnx,zynq-pinctrl.txt | 105 --------- .../bindings/pinctrl/xlnx,zynq-pinctrl.yaml | 216 ++++++++++++++++++ 2 files changed, 216 insertions(+), 105 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt deleted file mode 100644 index f488b0f77406..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt +++ /dev/null @@ -1,105 +0,0 @@ - Binding for Xilinx Zynq Pinctrl - -Required properties: -- compatible: "xlnx,zynq-pinctrl" -- syscon: phandle to SLCR -- reg: Offset and length of pinctrl space in SLCR - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Zynq's pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, slew rate, etc. - -Each configuration node can consist of multiple nodes describing the pinmux and -pinconf options. Those nodes can be pinmux nodes or pinconf nodes. - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Required properties for pinmux nodes are: - - groups: A list of pinmux groups. - - function: The name of a pinmux function to activate for the specified set - of groups. - -Required properties for configuration nodes: -One of: - - pins: a list of pin names - - groups: A list of pinmux groups. - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pinmux subnode: - groups, function - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pinconf subnode: - groups, pins, bias-disable, bias-high-impedance, bias-pull-up, slew-rate, - low-power-disable, low-power-enable - - Valid arguments for 'slew-rate' are '0' and '1' to select between slow and fast - respectively. - - Valid values for groups are: - ethernet0_0_grp, ethernet1_0_grp, mdio0_0_grp, mdio1_0_grp, - qspi0_0_grp, qspi1_0_grp, qspi_fbclk, qspi_cs1_grp, spi0_0_grp - spi0_2_grp, - spi0_X_ssY (X=0..2, Y=0..2), spi1_0_grp - spi1_3_grp, - spi1_X_ssY (X=0..3, Y=0..2), sdio0_0_grp - sdio0_2_grp, - sdio1_0_grp - sdio1_3_grp, sdio0_emio_wp, sdio0_emio_cd, sdio1_emio_wp, - sdio1_emio_cd, smc0_nor, smc0_nor_cs1_grp, smc0_nor_addr25_grp, smc0_nand, - can0_0_grp - can0_10_grp, can1_0_grp - can1_11_grp, uart0_0_grp - uart0_10_grp, - uart1_0_grp - uart1_11_grp, i2c0_0_grp - i2c0_10_grp, i2c1_0_grp - i2c1_10_grp, - ttc0_0_grp - ttc0_2_grp, ttc1_0_grp - ttc1_2_grp, swdt0_0_grp - swdt0_4_grp, - gpio0_0_grp - gpio0_53_grp, usb0_0_grp, usb1_0_grp - - Valid values for pins are: - MIO0 - MIO53 - - Valid values for function are: - ethernet0, ethernet1, mdio0, mdio1, qspi0, qspi1, qspi_fbclk, qspi_cs1, - spi0, spi0_ss, spi1, spi1_ss, sdio0, sdio0_pc, sdio0_cd, sdio0_wp, - sdio1, sdio1_pc, sdio1_cd, sdio1_wp, - smc0_nor, smc0_nor_cs1, smc0_nor_addr25, smc0_nand, can0, can1, uart0, uart1, - i2c0, i2c1, ttc0, ttc1, swdt0, gpio0, usb0, usb1 - -The following driver-specific properties as defined here are valid to specify in -a pin configuration subnode: - - io-standard: Configure the pin to use the selected IO standard according to - this mapping: - 1: LVCMOS18 - 2: LVCMOS25 - 3: LVCMOS33 - 4: HSTL - -Example: - pinctrl0: pinctrl@700 { - compatible = "xlnx,pinctrl-zynq"; - reg = <0x700 0x200>; - syscon = <&slcr>; - - pinctrl_uart1_default: uart1-default { - mux { - groups = "uart1_10_grp"; - function = "uart1"; - }; - - conf { - groups = "uart1_10_grp"; - slew-rate = <0>; - io-standard = <1>; - }; - - conf-rx { - pins = "MIO49"; - bias-high-impedance; - }; - - conf-tx { - pins = "MIO48"; - bias-disable; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml new file mode 100644 index 000000000000..2da1969e02ec --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml @@ -0,0 +1,216 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/xlnx,zynq-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Zynq Pinctrl + +maintainers: + - Sai Krishna Potthuri + +description: | + Please refer to pinctrl-bindings.txt in this directory for details of the + common pinctrl bindings used by client devices, including the meaning of the + phrase "pin configuration node". + + Zynq's pin configuration nodes act as a container for an arbitrary number of + subnodes. Each of these subnodes represents some desired configuration for a + pin, a group, or a list of pins or groups. This configuration can include the + mux function to select on those pin(s)/group(s), and various pin configuration + parameters, such as pull-up, slew rate, etc. + + Each configuration node can consist of multiple nodes describing the pinmux and + pinconf options. Those nodes can be pinmux nodes or pinconf nodes. + + The name of each subnode is not important; all subnodes should be enumerated + and processed purely based on their content. + +properties: + compatible: + const: xlnx,zynq-pinctrl + + reg: + description: Specifies the base address and size of the SLCR space. + maxItems: 1 + + syscon: + description: + phandle to the SLCR. + +patternProperties: + '^(.*-)?(default|gpio)$': + type: object + patternProperties: + '^mux': + type: object + description: + Pinctrl node's client devices use subnodes for pin muxes, + which in turn use below standard properties. + $ref: pinmux-node.yaml# + + properties: + groups: + description: + List of groups to select (either this or "pins" must be + specified), available groups for this subnode. + items: + enum: [ethernet0_0_grp, ethernet1_0_grp, mdio0_0_grp, + mdio1_0_grp, qspi0_0_grp, qspi1_0_grp, qspi_fbclk, + qspi_cs1_grp, spi0_0_grp, spi0_1_grp, spi0_2_grp, + spi0_0_ss0, spi0_0_ss1, spi0_0_ss2, spi0_1_ss0, + spi0_1_ss1, spi0_1_ss2, spi0_2_ss0, spi0_2_ss1, + spi0_2_ss2, spi1_0_grp, spi1_1_grp, spi1_2_grp, + spi1_3_grp, spi1_0_ss0, spi1_0_ss1, spi1_0_ss2, + spi1_1_ss0, spi1_1_ss1, spi1_1_ss2, spi1_2_ss0, + spi1_2_ss1, spi1_2_ss2, spi1_3_ss0, spi1_3_ss1, + spi1_3_ss2, sdio0_0_grp, sdio0_1_grp, sdio0_2_grp, + sdio1_0_grp, sdio1_1_grp, sdio1_2_grp, sdio1_3_grp, + sdio0_emio_wp, sdio0_emio_cd, sdio1_emio_wp, + sdio1_emio_cd, smc0_nor, smc0_nor_cs1_grp, + smc0_nor_addr25_grp, smc0_nand, can0_0_grp, can0_1_grp, + can0_2_grp, can0_3_grp, can0_4_grp, can0_5_grp, + can0_6_grp, can0_7_grp, can0_8_grp, can0_9_grp, + can0_10_grp, can1_0_grp, can1_1_grp, can1_2_grp, + can1_3_grp, can1_4_grp, can1_5_grp, can1_6_grp, + can1_7_grp, can1_8_grp, can1_9_grp, can1_10_grp, + can1_11_grp, uart0_0_grp, uart0_1_grp, uart0_2_grp, + uart0_3_grp, uart0_4_grp, uart0_5_grp, uart0_6_grp, + uart0_7_grp, uart0_8_grp, uart0_9_grp, uart0_10_grp, + uart1_0_grp, uart1_1_grp, uart1_2_grp, uart1_3_grp, + uart1_4_grp, uart1_5_grp, uart1_6_grp, uart1_7_grp, + uart1_8_grp, uart1_9_grp, uart1_10_grp, uart1_11_grp, + i2c0_0_grp, i2c0_1_grp, i2c0_2_grp, i2c0_3_grp, + i2c0_4_grp, i2c0_5_grp, i2c0_6_grp, i2c0_7_grp, + i2c0_8_grp, i2c0_9_grp, i2c0_10_grp, i2c1_0_grp, + i2c1_1_grp, i2c1_2_grp, i2c1_3_grp, i2c1_4_grp, + i2c1_5_grp, i2c1_6_grp, i2c1_7_grp, i2c1_8_grp, + i2c1_9_grp, i2c1_10_grp, ttc0_0_grp, ttc0_1_grp, + ttc0_2_grp, ttc1_0_grp, ttc1_1_grp, ttc1_2_grp, + swdt0_0_grp, swdt0_1_grp, swdt0_2_grp, swdt0_3_grp, + swdt0_4_grp, gpio0_0_grp, gpio0_1_grp, gpio0_2_grp, + gpio0_3_grp, gpio0_4_grp, gpio0_5_grp, gpio0_6_grp, + gpio0_7_grp, gpio0_8_grp, gpio0_9_grp, gpio0_10_grp, + gpio0_11_grp, gpio0_12_grp, gpio0_13_grp, gpio0_14_grp, + gpio0_15_grp, gpio0_16_grp, gpio0_17_grp, gpio0_18_grp, + gpio0_19_grp, gpio0_20_grp, gpio0_21_grp, gpio0_22_grp, + gpio0_23_grp, gpio0_24_grp, gpio0_25_grp, gpio0_26_grp, + gpio0_27_grp, gpio0_28_grp, gpio0_29_grp, gpio0_30_grp, + gpio0_31_grp, gpio0_32_grp, gpio0_33_grp, gpio0_34_grp, + gpio0_35_grp, gpio0_36_grp, gpio0_37_grp, gpio0_38_grp, + gpio0_39_grp, gpio0_40_grp, gpio0_41_grp, gpio0_42_grp, + gpio0_43_grp, gpio0_44_grp, gpio0_45_grp, gpio0_46_grp, + gpio0_47_grp, gpio0_48_grp, gpio0_49_grp, gpio0_50_grp, + gpio0_51_grp, gpio0_52_grp, gpio0_53_grp, usb0_0_grp, + usb1_0_grp] + maxItems: 54 + + function: + description: + Specify the alternative function to be configured for the + given pin groups. + enum: [ethernet0, ethernet1, mdio0, mdio1, qspi0, qspi1, qspi_fbclk, + qspi_cs1, spi0, spi0_ss, spi1, spi1_ss, sdio0, sdio0_pc, + sdio0_cd, sdio0_wp, sdio1, sdio1_pc, sdio1_cd, sdio1_wp, + smc0_nor, smc0_nor_cs1, smc0_nor_addr25, smc0_nand, can0, + can1, uart0, uart1, i2c0, i2c1, ttc0, ttc1, swdt0, gpio0, + usb0, usb1] + + required: + - groups + - function + + additionalProperties: false + + '^conf': + type: object + description: + Pinctrl node's client devices use subnodes for pin configurations, + which in turn use the standard properties below. + $ref: pincfg-node.yaml# + + properties: + groups: + description: + List of pin groups as mentioned above. + + pins: + description: + List of pin names to select in this subnode. + items: + pattern: '^MIO([0-9]|[1-4][0-9]|5[0-3])$' + maxItems: 54 + + bias-pull-up: true + + bias-pull-down: true + + bias-disable: true + + bias-high-impedance: true + + low-power-enable: true + + low-power-disable: true + + slew-rate: + enum: [0, 1] + + io-standard: + description: + Selects the IO standard for MIO pins, this is driver specific. + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [1, 2, 3, 4] + + oneOf: + - required: [ groups ] + - required: [ pins ] + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - syscon + +additionalProperties: false + +examples: + - | + pinctrl0: pinctrl@700 { + compatible = "xlnx,zynq-pinctrl"; + reg = <0x700 0x200>; + syscon = <&slcr>; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_10_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_10_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO49"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO48"; + bias-disable; + }; + }; + }; + + uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; + }; + +...