diff mbox series

[5.4,103/108] iio: accel: bma180: Use explicit member assignment

Message ID 20210726153834.981310767@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman July 26, 2021, 3:39 p.m. UTC 
From: Linus Walleij <linus.walleij@linaro.org>


commit 9436abc40139503a7cea22a96437697d048f31c0 upstream

This uses the C99 explicit .member assignment for the
variant data in struct bma180_part_info. This makes it
easier to understand and add new variants.

Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/accel/bma180.c |   68 +++++++++++++++++++++++++++++----------------
 1 file changed, 44 insertions(+), 24 deletions(-)
diff mbox series

Patch

--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -633,32 +633,52 @@  static const struct iio_chan_spec bma250
 
 static const struct bma180_part_info bma180_part_info[] = {
 	[BMA180] = {
-		bma180_channels, ARRAY_SIZE(bma180_channels),
-		bma180_scale_table, ARRAY_SIZE(bma180_scale_table),
-		bma180_bw_table, ARRAY_SIZE(bma180_bw_table),
-		BMA180_CTRL_REG0, BMA180_RESET_INT,
-		BMA180_CTRL_REG0, BMA180_SLEEP,
-		BMA180_BW_TCS, BMA180_BW,
-		BMA180_OFFSET_LSB1, BMA180_RANGE,
-		BMA180_TCO_Z, BMA180_MODE_CONFIG, BMA180_LOW_POWER,
-		BMA180_CTRL_REG3, BMA180_NEW_DATA_INT,
-		BMA180_RESET,
-		bma180_chip_config,
-		bma180_chip_disable,
+		.channels = bma180_channels,
+		.num_channels = ARRAY_SIZE(bma180_channels),
+		.scale_table = bma180_scale_table,
+		.num_scales = ARRAY_SIZE(bma180_scale_table),
+		.bw_table = bma180_bw_table,
+		.num_bw = ARRAY_SIZE(bma180_bw_table),
+		.int_reset_reg = BMA180_CTRL_REG0,
+		.int_reset_mask = BMA180_RESET_INT,
+		.sleep_reg = BMA180_CTRL_REG0,
+		.sleep_mask = BMA180_SLEEP,
+		.bw_reg = BMA180_BW_TCS,
+		.bw_mask = BMA180_BW,
+		.scale_reg = BMA180_OFFSET_LSB1,
+		.scale_mask = BMA180_RANGE,
+		.power_reg = BMA180_TCO_Z,
+		.power_mask = BMA180_MODE_CONFIG,
+		.lowpower_val = BMA180_LOW_POWER,
+		.int_enable_reg = BMA180_CTRL_REG3,
+		.int_enable_mask = BMA180_NEW_DATA_INT,
+		.softreset_reg = BMA180_RESET,
+		.chip_config = bma180_chip_config,
+		.chip_disable = bma180_chip_disable,
 	},
 	[BMA250] = {
-		bma250_channels, ARRAY_SIZE(bma250_channels),
-		bma250_scale_table, ARRAY_SIZE(bma250_scale_table),
-		bma250_bw_table, ARRAY_SIZE(bma250_bw_table),
-		BMA250_INT_RESET_REG, BMA250_INT_RESET_MASK,
-		BMA250_POWER_REG, BMA250_SUSPEND_MASK,
-		BMA250_BW_REG, BMA250_BW_MASK,
-		BMA250_RANGE_REG, BMA250_RANGE_MASK,
-		BMA250_POWER_REG, BMA250_LOWPOWER_MASK, 1,
-		BMA250_INT_ENABLE_REG, BMA250_DATA_INTEN_MASK,
-		BMA250_RESET_REG,
-		bma250_chip_config,
-		bma250_chip_disable,
+		.channels = bma250_channels,
+		.num_channels = ARRAY_SIZE(bma250_channels),
+		.scale_table = bma250_scale_table,
+		.num_scales = ARRAY_SIZE(bma250_scale_table),
+		.bw_table = bma250_bw_table,
+		.num_bw = ARRAY_SIZE(bma250_bw_table),
+		.int_reset_reg = BMA250_INT_RESET_REG,
+		.int_reset_mask = BMA250_INT_RESET_MASK,
+		.sleep_reg = BMA250_POWER_REG,
+		.sleep_mask = BMA250_SUSPEND_MASK,
+		.bw_reg = BMA250_BW_REG,
+		.bw_mask = BMA250_BW_MASK,
+		.scale_reg = BMA250_RANGE_REG,
+		.scale_mask = BMA250_RANGE_MASK,
+		.power_reg = BMA250_POWER_REG,
+		.power_mask = BMA250_LOWPOWER_MASK,
+		.lowpower_val = 1,
+		.int_enable_reg = BMA250_INT_ENABLE_REG,
+		.int_enable_mask = BMA250_DATA_INTEN_MASK,
+		.softreset_reg = BMA250_RESET_REG,
+		.chip_config = bma250_chip_config,
+		.chip_disable = bma250_chip_disable,
 	},
 };