@@ -21,6 +21,7 @@
#include <linux/iopoll.h>
#include <linux/can/dev.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/phy/phy.h>
#include "m_can.h"
@@ -1521,6 +1522,8 @@ static int m_can_close(struct net_device *dev)
close_candev(dev);
can_led_event(dev, CAN_LED_EVENT_STOP);
+ phy_power_off(cdev->transceiver);
+
return 0;
}
@@ -1706,10 +1709,14 @@ static int m_can_open(struct net_device *dev)
struct m_can_classdev *cdev = netdev_priv(dev);
int err;
- err = m_can_clk_start(cdev);
+ err = phy_power_on(cdev->transceiver);
if (err)
return err;
+ err = m_can_clk_start(cdev);
+ if (err)
+ goto out_phy_power_off;
+
/* open the can device */
err = open_candev(dev);
if (err) {
@@ -1766,6 +1773,8 @@ static int m_can_open(struct net_device *dev)
close_candev(dev);
exit_disable_clks:
m_can_clk_stop(cdev);
+out_phy_power_off:
+ phy_power_off(cdev->transceiver);
return err;
}
@@ -28,6 +28,7 @@
#include <linux/iopoll.h>
#include <linux/can/dev.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/phy/phy.h>
/* m_can lec values */
enum m_can_lec_type {
@@ -82,6 +83,7 @@ struct m_can_classdev {
struct workqueue_struct *tx_wq;
struct work_struct tx_work;
struct sk_buff *tx_skb;
+ struct phy *transceiver;
struct can_bittiming_const *bit_timing;
struct can_bittiming_const *data_timing;
@@ -6,6 +6,7 @@
// Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
#include "m_can.h"
@@ -67,6 +68,7 @@ static int m_can_plat_probe(struct platform_device *pdev)
struct resource *res;
void __iomem *addr;
void __iomem *mram_addr;
+ struct phy *transceiver;
int irq, ret = 0;
mcan_class = m_can_class_allocate_dev(&pdev->dev,
@@ -101,6 +103,16 @@ static int m_can_plat_probe(struct platform_device *pdev)
goto probe_fail;
}
+ transceiver = devm_phy_optional_get(&pdev->dev, NULL);
+ if (IS_ERR(transceiver)) {
+ ret = PTR_ERR(transceiver);
+ dev_err_probe(&pdev->dev, ret, "failed to get phy\n");
+ goto probe_fail;
+ }
+
+ if (transceiver)
+ mcan_class->can.bitrate_max = transceiver->attrs.max_link_rate;
+
priv->base = addr;
priv->mram_base = mram_addr;
@@ -108,6 +120,7 @@ static int m_can_plat_probe(struct platform_device *pdev)
mcan_class->pm_clock_support = 1;
mcan_class->can.clock.freq = clk_get_rate(mcan_class->cclk);
mcan_class->dev = &pdev->dev;
+ mcan_class->transceiver = transceiver;
mcan_class->ops = &m_can_plat_ops;