@@ -37,7 +37,7 @@
* quanta, from when the bit is sent on the TX pin to when it is
* received on the RX pin of the transmitter. Possible options:
*
- * O: automatic mode. The controller dynamically measure @tdcv
+ * 0: automatic mode. The controller dynamically measures @tdcv
* for each transmitted CAN FD frame.
*
* Other values: manual mode. Use the fixed provided value.
@@ -45,7 +45,7 @@
* @tdco: Transmitter Delay Compensation Offset. Offset value, in time
* quanta, defining the distance between the start of the bit
* reception on the RX pin of the transceiver and the SSP
- * position such as SSP = @tdcv + @tdco.
+ * position such that SSP = @tdcv + @tdco.
*
* If @tdco is zero, then TDC is disabled and both @tdcv and
* @tdcf should be ignored.
This patch fixes a typo in the documentation for struct can_tdc::tdcv. The number "0" refers to automatic mode not the letter "O". Further two grammar errors in the documentation for struct can_tdc are fixed. First grammar error: add a missing third person 's'. Second grammar error: replace "such as" by "such that". The intent is to give a condition, not an example. Fixes: 289ea9e4ae59 ("can: add new CAN FD bittiming parameters: Transmitter Delay Compensation (TDC)") Link: https://lore.kernel.org/r/20210616095922.2430415-1-mkl@pengutronix.de Link: https://lore.kernel.org/r/20210616124057.60723-1-mailhol.vincent@wanadoo.fr Co-developed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> --- include/linux/can/bittiming.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)