diff mbox series

[v2,1/4] dt-bindings: mfd: convert tps65086.txt to YAML

Message ID 20210727092554.1059305-2-kernel@esmil.dk
State Accepted
Commit 68f0ba70ded62fa0d678922386ae82c689a737a4
Headers show
Series BeagleV Starlight reset support | expand

Commit Message

Emil Renner Berthing July 27, 2021, 9:25 a.m. UTC
This converts the tps65086.txt binding description to YAML schema so
dts files can be verified automatically.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
---
 .../devicetree/bindings/mfd/ti,tps65086.yaml  | 127 ++++++++++++++++++
 .../devicetree/bindings/mfd/tps65086.txt      |  54 --------
 2 files changed, 127 insertions(+), 54 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
 delete mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt

Comments

Rob Herring (Arm) Aug. 2, 2021, 7:43 p.m. UTC | #1
On Tue, 27 Jul 2021 11:25:51 +0200, Emil Renner Berthing wrote:
> This converts the tps65086.txt binding description to YAML schema so

> dts files can be verified automatically.

> 

> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>

> ---

>  .../devicetree/bindings/mfd/ti,tps65086.yaml  | 127 ++++++++++++++++++

>  .../devicetree/bindings/mfd/tps65086.txt      |  54 --------

>  2 files changed, 127 insertions(+), 54 deletions(-)

>  create mode 100644 Documentation/devicetree/bindings/mfd/ti,tps65086.yaml

>  delete mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt

> 


Reviewed-by: Rob Herring <robh@kernel.org>
Lee Jones Aug. 16, 2021, 12:40 p.m. UTC | #2
On Tue, 27 Jul 2021, Emil Renner Berthing wrote:

> This converts the tps65086.txt binding description to YAML schema so
> dts files can be verified automatically.
> 
> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> ---
>  .../devicetree/bindings/mfd/ti,tps65086.yaml  | 127 ++++++++++++++++++
>  .../devicetree/bindings/mfd/tps65086.txt      |  54 --------
>  2 files changed, 127 insertions(+), 54 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
>  delete mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt

Applied, thanks.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
new file mode 100644
index 000000000000..9f6e1349eadc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
@@ -0,0 +1,127 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,tps65086.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPS65086 Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: ti,tps65086
+
+  reg:
+    const: 0x5e
+    description: I2C slave address
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description: |
+      The first cell is the IRQ number. The second cell is the flags,
+      encoded as trigger masks from ../interrupt-controller/interrupts.txt.
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description: |
+      The first cell is the pin number and the second cell is used to specify
+      flags.  See ../gpio/gpio.txt for more information.
+
+  regulators:
+    type: object
+    description: |
+      List of child nodes that specify the regulator initialization data.
+      Child nodes must be named after their hardware counterparts:
+      buck[1-6], ldoa[1-3], swa1, swb[1-2], and vtt.
+      Each child node is defined using the standard binding for regulators and
+      the optional regulator properties defined below.
+
+    patternProperties:
+      "^buck[1-6]$":
+        type: object
+        $ref: ../regulator/regulator.yaml
+
+        properties:
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+          ti,regulator-step-size-25mv:
+            type: boolean
+            description: |
+              Set this if the regulator is factory set with a 25mv step voltage
+              mapping.
+          ti,regulator-decay:
+            type: boolean
+            description: |
+              Set this if the output needs to decay, default is for the output
+              to slew down.
+
+        additionalProperties: false
+
+      "^(ldoa[1-3]|swa1|swb[1-2]|vtt)$":
+        type: object
+        $ref: ../regulator/regulator.yaml
+
+        properties:
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+
+        additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - regulators
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic: pmic@5e {
+            compatible = "ti,tps65086";
+            reg = <0x5e>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            regulators {
+                buck1 {
+                    regulator-name = "vcc1";
+                    regulator-min-microvolt = <1600000>;
+                    regulator-max-microvolt = <1600000>;
+                    regulator-boot-on;
+                    ti,regulator-decay;
+                    ti,regulator-step-size-25mv;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt
deleted file mode 100644
index 67eac0ed32df..000000000000
--- a/Documentation/devicetree/bindings/mfd/tps65086.txt
+++ /dev/null
@@ -1,54 +0,0 @@ 
-* TPS65086 Power Management Integrated Circuit (PMIC) bindings
-
-Required properties:
- - compatible		: Should be "ti,tps65086".
- - reg			: I2C slave address.
- - interrupts		: The interrupt line the device is connected to.
- - interrupt-controller	: Marks the device node as an interrupt controller.
- - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
-			    The first cell is the IRQ number.
-			    The second cell is the flags, encoded as trigger
-			    masks from ../interrupt-controller/interrupts.txt.
- - gpio-controller      : Marks the device node as a GPIO Controller.
- - #gpio-cells          : Should be two.  The first cell is the pin number and
-                            the second cell is used to specify flags.
-                            See ../gpio/gpio.txt for more information.
- - regulators:          : List of child nodes that specify the regulator
-                            initialization data. Child nodes must be named
-                            after their hardware counterparts: buck[1-6],
-                            ldoa[1-3], swa1, swb[1-2], and vtt. Each child
-                            node is defined using the standard binding for
-                            regulators and the optional regulator properties
-                            defined below.
-
-Optional regulator properties:
- - ti,regulator-step-size-25mv	: This is applicable for buck[1-6], set this
-				    if the regulator is factory set with a 25mv
-				    step voltage mapping.
- - ti,regulator-decay		: This is applicable for buck[1-6], set this if
-				    the output needs to decay, default is for
-				    the output to slew down.
-
-Example:
-
-	pmic: tps65086@5e {
-		compatible = "ti,tps65086";
-		reg = <0x5e>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		regulators {
-			buck1 {
-				regulator-name = "vcc1";
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <1600000>;
-				regulator-boot-on;
-				ti,regulator-decay;
-				ti,regulator-step-size-25mv;
-			};
-		};
-	};