diff mbox

[added,to,the,3.18,stable,tree] ARM: ux500: Move GPIO regulator for SD-card into board DTSs

Message ID 1432645294-9185-29-git-send-email-sasha.levin@oracle.com
State New
Headers show

Commit Message

Sasha Levin May 26, 2015, 1:01 p.m. UTC
From: Ulf Hansson <ulf.hansson@linaro.org>

This patch has been added to the 3.18 stable tree. If you have any
objections, please let us know.
diff mbox

Patch

===============

[ Upstream commit 53d2669844263fd5fdc70f0eb6a2eb8a21086d8e ]

The GPIO regulator for the SD-card isn't a ux500 SOC configuration, but
instead it's specific to the board. Move the definition of it, into the
board DTSs.

Fixes: c94a4ab7af3f ("ARM: ux500: Disable the MMCI gpio-regulator by default")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
---
 arch/arm/boot/dts/ste-dbx5x0.dtsi  | 17 -----------------
 arch/arm/boot/dts/ste-href.dtsi    | 17 +++++++++++++++++
 arch/arm/boot/dts/ste-snowball.dts | 15 +++++++++++++++
 3 files changed, 32 insertions(+), 17 deletions(-)

diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 9d23230..563640f 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -995,23 +995,6 @@ 
 			status = "disabled";
 		};
 
-		vmmci: regulator-gpio {
-			compatible = "regulator-gpio";
-
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2900000>;
-			regulator-name = "mmci-reg";
-			regulator-type = "voltage";
-
-			startup-delay-us = <100>;
-			enable-active-high;
-
-			states = <1800000 0x1
-				  2900000 0x0>;
-
-			status = "disabled";
-		};
-
 		mcde@a0350000 {
 			compatible = "stericsson,mcde";
 			reg = <0xa0350000 0x1000>, /* MCDE */
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index bf8f0ed..8cf499a 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -111,6 +111,23 @@ 
 			pinctrl-1 = <&i2c3_sleep_mode>;
 		};
 
+		vmmci: regulator-gpio {
+			compatible = "regulator-gpio";
+
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-name = "mmci-reg";
+			regulator-type = "voltage";
+
+			startup-delay-us = <100>;
+			enable-active-high;
+
+			states = <1800000 0x1
+				  2900000 0x0>;
+
+			status = "disabled";
+		};
+
 		// External Micro SD slot
 		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 3e97a66..eab23bf 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -146,8 +146,23 @@ 
 		};
 
 		vmmci: regulator-gpio {
+			compatible = "regulator-gpio";
+
 			gpios = <&gpio7 4 0x4>;
 			enable-gpio = <&gpio6 25 0x4>;
+
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-name = "mmci-reg";
+			regulator-type = "voltage";
+
+			startup-delay-us = <100>;
+			enable-active-high;
+
+			states = <1800000 0x1
+				  2900000 0x0>;
+
+			status = "disabled";
 		};
 
 		// External Micro SD slot