diff mbox series

[net,1/1] net: dsa: qca: ar9331: reorder MDIO write sequence

Message ID 20210803063746.3600-1-o.rempel@pengutronix.de
State New
Headers show
Series [net,1/1] net: dsa: qca: ar9331: reorder MDIO write sequence | expand

Commit Message

Oleksij Rempel Aug. 3, 2021, 6:37 a.m. UTC
In case of this switch we work with 32bit registers on top of 16bit
bus. Some registers (for example access to forwarding database) have
trigger bit on the first 16bit half of request and the result +
configuration of request in the second half. Without this patch, we would
trigger database operation and overwrite result in one run.

To make it work properly, we should do the second part of transfer
before the first one is done.

So far, this rule seems to work for all registers on this switch.

Fixes: ec6698c272de ("net: dsa: add support for Atheros AR9331 built-in switch")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/dsa/qca/ar9331.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

Comments

Florian Fainelli Aug. 3, 2021, 9:49 a.m. UTC | #1
On 8/2/2021 11:37 PM, Oleksij Rempel wrote:
> In case of this switch we work with 32bit registers on top of 16bit
> bus. Some registers (for example access to forwarding database) have
> trigger bit on the first 16bit half of request and the result +
> configuration of request in the second half. Without this patch, we would
> trigger database operation and overwrite result in one run.
> 
> To make it work properly, we should do the second part of transfer
> before the first one is done.
> 
> So far, this rule seems to work for all registers on this switch.
> 
> Fixes: ec6698c272de ("net: dsa: add support for Atheros AR9331 built-in switch")
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Vladimir Oltean Aug. 3, 2021, 9:53 a.m. UTC | #2
On Tue, Aug 03, 2021 at 08:37:46AM +0200, Oleksij Rempel wrote:
> In case of this switch we work with 32bit registers on top of 16bit
> bus. Some registers (for example access to forwarding database) have
> trigger bit on the first 16bit half of request and the result +
> configuration of request in the second half. Without this patch, we would
> trigger database operation and overwrite result in one run.
> 
> To make it work properly, we should do the second part of transfer
> before the first one is done.
> 
> So far, this rule seems to work for all registers on this switch.
> 
> Fixes: ec6698c272de ("net: dsa: add support for Atheros AR9331 built-in switch")
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> ---

I don't really like to chase a patch to make sure my review tags get
propagated, but anyway:

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>

https://patchwork.kernel.org/project/netdevbpf/patch/20210802131037.32326-2-o.rempel@pengutronix.de/
diff mbox series

Patch

diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c
index ca2ad77b71f1..6686192e1883 100644
--- a/drivers/net/dsa/qca/ar9331.c
+++ b/drivers/net/dsa/qca/ar9331.c
@@ -837,16 +837,24 @@  static int ar9331_mdio_write(void *ctx, u32 reg, u32 val)
 		return 0;
 	}
 
-	ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg, val);
+	/* In case of this switch we work with 32bit registers on top of 16bit
+	 * bus. Some registers (for example access to forwarding database) have
+	 * trigger bit on the first 16bit half of request, the result and
+	 * configuration of request in the second half.
+	 * To make it work properly, we should do the second part of transfer
+	 * before the first one is done.
+	 */
+	ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg + 2,
+				  val >> 16);
 	if (ret < 0)
 		goto error;
 
-	ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg + 2,
-				  val >> 16);
+	ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg, val);
 	if (ret < 0)
 		goto error;
 
 	return 0;
+
 error:
 	dev_err_ratelimited(&sbus->dev, "Bus error. Failed to write register.\n");
 	return ret;