| Message ID | 20210804210214.1891755-2-elder@linaro.org |
|---|---|
| State | Accepted |
| Commit | fc4f0273d4fba2c125141ef45474d253f6c28f3f |
| Headers | show |
| Series | arm64: dts: qcom: IPA-related DTS updates | expand |
On Wed, Aug 04, 2021 at 04:02:11PM -0500, Alex Elder wrote: > Add IPA-related nodes and definitions to "sc7280.dtsi", including > the reserved memory area used for AP-based IPA firmware loading. > > Signed-off-by: Alex Elder <elder@linaro.org> > --- > arch/arm64/boot/dts/qcom/sc7280.dtsi | 42 ++++++++++++++++++++++++++++ > 1 file changed, 42 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi > index 029723a75edef..5764c5b5cae17 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi > @@ -69,6 +69,11 @@ cpucp_mem: memory@80b00000 { > no-map; > reg = <0x0 0x80b00000 0x0 0x100000>; > }; > + > + ipa_fw_mem: memory@8b700000 { > + reg = <0 0x8b700000 0 0x10000>; > + no-map; > + }; > }; > > cpus { > @@ -568,6 +573,43 @@ mmss_noc: interconnect@1740000 { > qcom,bcm-voters = <&apps_bcm_voter>; > }; > > + ipa: ipa@1e40000 { > + compatible = "qcom,sc7280-ipa"; > + > + iommus = <&apps_smmu 0x480 0x0>, > + <&apps_smmu 0x482 0x0>; > + reg = <0 0x1e40000 0 0x8000>, > + <0 0x1e50000 0 0x4ad0>, > + <0 0x1e04000 0 0x23000>; > + reg-names = "ipa-reg", > + "ipa-shared", > + "gsi"; > + > + interrupts-extended = <&intc 0 654 IRQ_TYPE_EDGE_RISING>, > + <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>, nit: use GIC_SPI for the interrupt type > + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, > + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "ipa", > + "gsi", > + "ipa-clock-query", > + "ipa-setup-ready"; > + > + clocks = <&rpmhcc RPMH_IPA_CLK>; > + clock-names = "core"; > + > + interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, > + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_IPA_CFG 0>; > + interconnect-names = "memory", > + "config"; > + > + qcom,smem-states = <&ipa_smp2p_out 0>, > + <&ipa_smp2p_out 1>; > + qcom,smem-state-names = "ipa-clock-enabled-valid", > + "ipa-clock-enabled"; > + > + status = "disabled"; > + }; > + I know little about IPA, but besides the nit this looks sane to me. Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 029723a75edef..5764c5b5cae17 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -69,6 +69,11 @@ cpucp_mem: memory@80b00000 { no-map; reg = <0x0 0x80b00000 0x0 0x100000>; }; + + ipa_fw_mem: memory@8b700000 { + reg = <0 0x8b700000 0 0x10000>; + no-map; + }; }; cpus { @@ -568,6 +573,43 @@ mmss_noc: interconnect@1740000 { qcom,bcm-voters = <&apps_bcm_voter>; }; + ipa: ipa@1e40000 { + compatible = "qcom,sc7280-ipa"; + + iommus = <&apps_smmu 0x480 0x0>, + <&apps_smmu 0x482 0x0>; + reg = <0 0x1e40000 0 0x8000>, + <0 0x1e50000 0 0x4ad0>, + <0 0x1e04000 0 0x23000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc 0 654 IRQ_TYPE_EDGE_RISING>, + <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_IPA_CFG 0>; + interconnect-names = "memory", + "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex", "syscon"; reg = <0 0x01f40000 0 0x40000>;
Add IPA-related nodes and definitions to "sc7280.dtsi", including the reserved memory area used for AP-based IPA firmware loading. Signed-off-by: Alex Elder <elder@linaro.org> --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 42 ++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+)