| Message ID | 20210805124251.4306-1-matwey.kornilov@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | tiny-printf: Handle %pM format when CONFIG_SPL_NET_SUPPORT is enabled | expand |
Hi Matwey, On Thu, 5 Aug 2021 at 06:43, Matwey V. Kornilov <matwey.kornilov@gmail.com> wrote: > > %pM format string is used to print MAC-address and this is required while SPL > network boot. > > This patch fixes the SPL boot issues like the following: > > Trying to boot from USB eth > ## Error: flags type check failure for "ethaddr" <= "40309614M" (type: m) > ## Error inserting "ethaddr" variable, errno=1 > eth0: eth_cpsw## Error: flags type check failure for "eth1addr" <= > "81f01114M" (type: m) > ## Error inserting "eth1addr" variable, errno=1 > , eth1: usb_ether > eth_cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! > Problem booting with BOOTP > SPL: failed to boot from all boot devices > ### ERROR ### Please RESET the board ### > > Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> > --- > lib/tiny-printf.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/lib/tiny-printf.c b/lib/tiny-printf.c > index 8fc7e48d99..0b2fabf118 100644 > --- a/lib/tiny-printf.c > +++ b/lib/tiny-printf.c > @@ -269,7 +269,7 @@ static int _vprintf(struct printf_info *info, const char *fmt, va_list va) > } > break; > case 'p': > -#ifdef DEBUG > +#if IS_ENABLED(CONFIG_SPL_NET_SUPPORT) || defined(DEBUG) > pointer(info, fmt, va_arg(va, void *)); > /* > * Skip this because it pulls in _ctype which is > -- > 2.31.1 > Reviewed-by: Simon Glass <sjg@chromium.org> But can you try something like: case 'p': if (CONFIG_IS_ENABLED(NET_SUPPORT) || _DEBUG) { ... } instead? Will need to include log-h though. We try to avoid the preprocessor. Regards, Simon
diff --git a/lib/tiny-printf.c b/lib/tiny-printf.c index 8fc7e48d99..0b2fabf118 100644 --- a/lib/tiny-printf.c +++ b/lib/tiny-printf.c @@ -269,7 +269,7 @@ static int _vprintf(struct printf_info *info, const char *fmt, va_list va) } break; case 'p': -#ifdef DEBUG +#if IS_ENABLED(CONFIG_SPL_NET_SUPPORT) || defined(DEBUG) pointer(info, fmt, va_arg(va, void *)); /* * Skip this because it pulls in _ctype which is
%pM format string is used to print MAC-address and this is required while SPL network boot. This patch fixes the SPL boot issues like the following: Trying to boot from USB eth ## Error: flags type check failure for "ethaddr" <= "40309614M" (type: m) ## Error inserting "ethaddr" variable, errno=1 eth0: eth_cpsw## Error: flags type check failure for "eth1addr" <= "81f01114M" (type: m) ## Error inserting "eth1addr" variable, errno=1 , eth1: usb_ether eth_cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! Problem booting with BOOTP SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> --- lib/tiny-printf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -- 2.31.1