| Message ID | 1628726882-27841-2-git-send-email-sbillaka@codeaurora.org |
|---|---|
| State | New |
| Headers | show |
| Series | [v1,1/2] drm/msm/dp: Add support for SC7280 eDP | expand |
On 2021-08-12 06:11, Stephen Boyd wrote: > Quoting Sankeerth Billakanti (2021-08-11 17:08:01) >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >> index b131fd37..1096c44 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c >> @@ -856,9 +856,9 @@ static const struct dpu_intf_cfg sm8150_intf[] = { >> }; >> >> static const struct dpu_intf_cfg sc7280_intf[] = { >> - INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, 0, 24, >> INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25), >> + INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, 1, 24, >> INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25), >> INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, >> INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27), >> - INTF_BLK("intf_5", INTF_5, 0x39000, INTF_EDP, 0, 24, >> INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), >> + INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, 0, 24, >> INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), >> }; >> >> /************************************************************* >> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c >> b/drivers/gpu/drm/msm/dp/dp_ctrl.c >> index d2569da..06d5a2d 100644 >> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c >> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c >> @@ -1244,7 +1244,9 @@ static int dp_ctrl_link_train(struct >> dp_ctrl_private *ctrl, >> struct dp_cr_status *cr, int *training_step) >> { >> int ret = 0; >> + u8 *dpcd = ctrl->panel->dpcd; >> u8 encoding = DP_SET_ANSI_8B10B; >> + u8 ssc = 0, assr = 0; > > Please don't initialize to zero and then overwrite it before using it. > It hides usage before actual initialization bugs. > Okay. I will change it. >> struct dp_link_info link_info = {0}; >> >> dp_ctrl_config_ctrl(ctrl); >> @@ -1254,9 +1256,21 @@ static int dp_ctrl_link_train(struct >> dp_ctrl_private *ctrl, >> link_info.capabilities = DP_LINK_CAP_ENHANCED_FRAMING; >> >> dp_aux_link_configure(ctrl->aux, &link_info); >> + >> + if (dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5) { >> + ssc = DP_SPREAD_AMP_0_5; >> + drm_dp_dpcd_write(ctrl->aux, DP_DOWNSPREAD_CTRL, &ssc, >> 1); >> + } >> + >> drm_dp_dpcd_write(ctrl->aux, DP_MAIN_LINK_CHANNEL_CODING_SET, >> &encoding, 1); >> >> + if (dpcd[DP_EDP_CONFIGURATION_CAP] & >> DP_ALTERNATE_SCRAMBLER_RESET_CAP) { >> + assr = DP_ALTERNATE_SCRAMBLER_RESET_ENABLE; >> + drm_dp_dpcd_write(ctrl->aux, DP_EDP_CONFIGURATION_SET, >> + &assr, 1); >> + } >> + >> ret = dp_ctrl_link_train_1(ctrl, cr, training_step); >> if (ret) { >> DRM_ERROR("link training #1 failed. ret=%d\n", ret); >> @@ -1328,9 +1342,11 @@ static int >> dp_ctrl_enable_mainlink_clocks(struct dp_ctrl_private *ctrl) >> struct dp_io *dp_io = &ctrl->parser->io; >> struct phy *phy = dp_io->phy; >> struct phy_configure_opts_dp *opts_dp = &dp_io->phy_opts.dp; >> + u8 *dpcd = ctrl->panel->dpcd; > > const? > Okay. I will change to const u8 *dpcd at all the required places. >> >> opts_dp->lanes = ctrl->link->link_params.num_lanes; >> opts_dp->link_rate = ctrl->link->link_params.rate / 100; >> + opts_dp->ssc = dpcd[DP_MAX_DOWNSPREAD] & >> DP_MAX_DOWNSPREAD_0_5; >> dp_ctrl_set_clock_rate(ctrl, DP_CTRL_PM, "ctrl_link", >> ctrl->link->link_params.rate * >> 1000); >> >> @@ -1760,6 +1776,9 @@ int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl) >> ctrl->link->link_params.num_lanes = >> ctrl->panel->link_info.num_lanes; >> ctrl->dp_ctrl.pixel_rate = >> ctrl->panel->dp_mode.drm_mode.clock; >> >> + if (ctrl->dp_ctrl.pixel_rate == 0) >> + return -EINVAL; >> + > > Why are we enabling the stream with a zero pixel clk? > This was an error condition I encountered while bringing up sc7280. HPD processing was delayed and I got a commit with pixel clock = 0. I will recheck why this is happening. >> DRM_DEBUG_DP("rate=%d, num_lanes=%d, pixel_rate=%d\n", >> ctrl->link->link_params.rate, >> ctrl->link->link_params.num_lanes, >> ctrl->dp_ctrl.pixel_rate); >> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c >> b/drivers/gpu/drm/msm/dp/dp_display.c >> index ee5bf64..a772290 100644 >> --- a/drivers/gpu/drm/msm/dp/dp_display.c >> +++ b/drivers/gpu/drm/msm/dp/dp_display.c >> @@ -117,8 +117,36 @@ struct dp_display_private { >> struct dp_audio *audio; >> }; >> >> +struct msm_dp_config { >> + phys_addr_t io_start[3]; >> + size_t num_dp; >> +}; >> + >> +static const struct msm_dp_config sc7180_dp_cfg = { >> + .io_start = { 0x0ae90000 }, >> + .num_dp = 1, >> +}; >> + >> +static const struct msm_dp_config sc8180x_dp_cfg = { >> + .io_start = { 0xae90000, 0xae98000, 0 }, >> + .num_dp = 3, >> +}; >> + >> +static const struct msm_dp_config sc8180x_edp_cfg = { >> + .io_start = { 0, 0, 0xae9a000 }, >> + .num_dp = 3, >> +}; >> + >> +static const struct msm_dp_config sc7280_edp_cfg = { >> + .io_start = { 0xaea0000, 0 }, >> + .num_dp = 2, >> +}; > > Are all of these supposed to be here? No. I will remove them. Only sc7280_edp_cfg will be there. > >> + >> static const struct of_device_id dp_dt_match[] = { >> - {.compatible = "qcom,sc7180-dp"}, >> + { .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_cfg }, >> + { .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_cfg }, >> + { .compatible = "qcom,sc8180x-edp", .data = &sc8180x_edp_cfg >> }, >> + { .compatible = "qcom,sc7280-edp", .data = &sc7280_edp_cfg }, > > Please sort alphabetically on compatible string, it helps avoid > conflicts in the future. Okay > >> {} >> }; >> >> @@ -1408,7 +1436,7 @@ void msm_dp_irq_postinstall(struct msm_dp >> *dp_display) >> >> dp_hpd_event_setup(dp); >> >> - dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 100); >> + dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 1); >> } >> >> void msm_dp_debugfs_init(struct msm_dp *dp_display, struct drm_minor >> *minor) >> diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c >> b/drivers/gpu/drm/msm/dp/dp_parser.c >> index 0519dd3..c05fc0a 100644 >> --- a/drivers/gpu/drm/msm/dp/dp_parser.c >> +++ b/drivers/gpu/drm/msm/dp/dp_parser.c >> @@ -248,6 +248,33 @@ static int dp_parser_clock(struct dp_parser >> *parser) >> return 0; >> } >> >> +static int dp_parser_gpio(struct dp_parser *parser) >> +{ >> + struct device *dev = &parser->pdev->dev; >> + int ret; >> + >> + parser->panel_bklt_gpio = devm_gpiod_get(dev, "panel-bklt", >> + GPIOD_OUT_HIGH); >> + if (IS_ERR(parser->panel_bklt_gpio)) { >> + ret = PTR_ERR(parser->panel_bklt_gpio); >> + parser->panel_bklt_gpio = NULL; >> + DRM_ERROR("%s: cannot get panel-bklt gpio, %d\n", >> __func__, ret); >> + goto fail; >> + } >> + >> + parser->panel_pwm_gpio = devm_gpiod_get(dev, "panel-pwm", >> GPIOD_OUT_HIGH); >> + if (IS_ERR(parser->panel_pwm_gpio)) { >> + ret = PTR_ERR(parser->panel_pwm_gpio); >> + parser->panel_pwm_gpio = NULL; >> + DRM_ERROR("%s: cannot get panel-pwm gpio, %d\n", >> __func__, ret); >> + goto fail; >> + } >> + >> + DRM_INFO("gpio on"); >> +fail: >> + return 0; >> +} > > Don't we have pwm backlight drivers like > drivers/video/backlight/pwm_bl.c to support this? This sort of thing > doesn't belong in the dp driver. Okay. I will explore it. > >> + >> static int dp_parser_parse(struct dp_parser *parser) >> { >> int rc = 0; >> @@ -269,6 +296,10 @@ static int dp_parser_parse(struct dp_parser >> *parser) >> if (rc) >> return rc; >> >> + rc = dp_parser_gpio(parser); >> + if (rc) >> + return rc; >> + >> /* Map the corresponding regulator information according to >> * version. Currently, since we only have one supported >> platform, >> * mapping the regulator directly. Thank you, Sankeerth
On Thu, Aug 12, 2021 at 05:38:01AM +0530, Sankeerth Billakanti wrote: > The eDP controller on SC7280 is similar to the eDP/DP controllers > supported by the current driver implementation. > > SC7280 supports one EDP and one DP controller which can operate > concurrently. > > The following are some required changes for the sc7280 sink: > 1. Additional gpio configuration for backlight and pwm via pmic. > 2. ASSR support programming on the sink. > 3. SSC support programming on the sink. > > Signed-off-by: Sankeerth Billakanti <sbillaka@codeaurora.org> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 4 ++-- > drivers/gpu/drm/msm/dp/dp_ctrl.c | 19 +++++++++++++++ > drivers/gpu/drm/msm/dp/dp_display.c | 32 ++++++++++++++++++++++++-- > drivers/gpu/drm/msm/dp/dp_parser.c | 31 +++++++++++++++++++++++++ > drivers/gpu/drm/msm/dp/dp_parser.h | 5 ++++ > 5 files changed, 87 insertions(+), 4 deletions(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > index b131fd37..1096c44 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > @@ -856,9 +856,9 @@ static const struct dpu_intf_cfg sm8150_intf[] = { > }; > > static const struct dpu_intf_cfg sc7280_intf[] = { > - INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25), > + INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, 1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25), > INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27), > - INTF_BLK("intf_5", INTF_5, 0x39000, INTF_EDP, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), > + INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), > }; > > /************************************************************* > diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c > index d2569da..06d5a2d 100644 > --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c > +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c > @@ -1244,7 +1244,9 @@ static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl, > struct dp_cr_status *cr, int *training_step) > { > int ret = 0; > + u8 *dpcd = ctrl->panel->dpcd; > u8 encoding = DP_SET_ANSI_8B10B; > + u8 ssc = 0, assr = 0; > struct dp_link_info link_info = {0}; > > dp_ctrl_config_ctrl(ctrl); > @@ -1254,9 +1256,21 @@ static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl, > link_info.capabilities = DP_LINK_CAP_ENHANCED_FRAMING; > > dp_aux_link_configure(ctrl->aux, &link_info); > + > + if (dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5) { > + ssc = DP_SPREAD_AMP_0_5; > + drm_dp_dpcd_write(ctrl->aux, DP_DOWNSPREAD_CTRL, &ssc, 1); > + } > + > drm_dp_dpcd_write(ctrl->aux, DP_MAIN_LINK_CHANNEL_CODING_SET, > &encoding, 1); > > + if (dpcd[DP_EDP_CONFIGURATION_CAP] & DP_ALTERNATE_SCRAMBLER_RESET_CAP) { > + assr = DP_ALTERNATE_SCRAMBLER_RESET_ENABLE; > + drm_dp_dpcd_write(ctrl->aux, DP_EDP_CONFIGURATION_SET, > + &assr, 1); > + } > + > ret = dp_ctrl_link_train_1(ctrl, cr, training_step); > if (ret) { > DRM_ERROR("link training #1 failed. ret=%d\n", ret); > @@ -1328,9 +1342,11 @@ static int dp_ctrl_enable_mainlink_clocks(struct dp_ctrl_private *ctrl) > struct dp_io *dp_io = &ctrl->parser->io; > struct phy *phy = dp_io->phy; > struct phy_configure_opts_dp *opts_dp = &dp_io->phy_opts.dp; > + u8 *dpcd = ctrl->panel->dpcd; > > opts_dp->lanes = ctrl->link->link_params.num_lanes; > opts_dp->link_rate = ctrl->link->link_params.rate / 100; > + opts_dp->ssc = dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5; > dp_ctrl_set_clock_rate(ctrl, DP_CTRL_PM, "ctrl_link", > ctrl->link->link_params.rate * 1000); > > @@ -1760,6 +1776,9 @@ int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl) > ctrl->link->link_params.num_lanes = ctrl->panel->link_info.num_lanes; > ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock; > > + if (ctrl->dp_ctrl.pixel_rate == 0) > + return -EINVAL; > + > DRM_DEBUG_DP("rate=%d, num_lanes=%d, pixel_rate=%d\n", > ctrl->link->link_params.rate, > ctrl->link->link_params.num_lanes, ctrl->dp_ctrl.pixel_rate); > diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c > index ee5bf64..a772290 100644 > --- a/drivers/gpu/drm/msm/dp/dp_display.c > +++ b/drivers/gpu/drm/msm/dp/dp_display.c > @@ -117,8 +117,36 @@ struct dp_display_private { > struct dp_audio *audio; > }; > > +struct msm_dp_config { > + phys_addr_t io_start[3]; > + size_t num_dp; > +}; > + > +static const struct msm_dp_config sc7180_dp_cfg = { > + .io_start = { 0x0ae90000 }, > + .num_dp = 1, > +}; > + > +static const struct msm_dp_config sc8180x_dp_cfg = { > + .io_start = { 0xae90000, 0xae98000, 0 }, > + .num_dp = 3, > +}; > + > +static const struct msm_dp_config sc8180x_edp_cfg = { > + .io_start = { 0, 0, 0xae9a000 }, > + .num_dp = 3, > +}; > + > +static const struct msm_dp_config sc7280_edp_cfg = { > + .io_start = { 0xaea0000, 0 }, > + .num_dp = 2, > +}; This data isn't used anywhere, is there some patch missing? And in case it is used (at some point), shouldn't at least the 'io_start' addresses be specified in the device tree rather than the driver? > + > static const struct of_device_id dp_dt_match[] = { > - {.compatible = "qcom,sc7180-dp"}, > + { .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_cfg }, > + { .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_cfg }, > + { .compatible = "qcom,sc8180x-edp", .data = &sc8180x_edp_cfg }, > + { .compatible = "qcom,sc7280-edp", .data = &sc7280_edp_cfg }, > {} > }; > > @@ -1408,7 +1436,7 @@ void msm_dp_irq_postinstall(struct msm_dp *dp_display) > > dp_hpd_event_setup(dp); > > - dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 100); > + dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 1); > } > > void msm_dp_debugfs_init(struct msm_dp *dp_display, struct drm_minor *minor) > diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c b/drivers/gpu/drm/msm/dp/dp_parser.c > index 0519dd3..c05fc0a 100644 > --- a/drivers/gpu/drm/msm/dp/dp_parser.c > +++ b/drivers/gpu/drm/msm/dp/dp_parser.c > @@ -248,6 +248,33 @@ static int dp_parser_clock(struct dp_parser *parser) > return 0; > } > > +static int dp_parser_gpio(struct dp_parser *parser) > +{ > + struct device *dev = &parser->pdev->dev; > + int ret; > + > + parser->panel_bklt_gpio = devm_gpiod_get(dev, "panel-bklt", > + GPIOD_OUT_HIGH); > + if (IS_ERR(parser->panel_bklt_gpio)) { > + ret = PTR_ERR(parser->panel_bklt_gpio); > + parser->panel_bklt_gpio = NULL; > + DRM_ERROR("%s: cannot get panel-bklt gpio, %d\n", __func__, ret); > + goto fail; > + } > + > + parser->panel_pwm_gpio = devm_gpiod_get(dev, "panel-pwm", GPIOD_OUT_HIGH); > + if (IS_ERR(parser->panel_pwm_gpio)) { > + ret = PTR_ERR(parser->panel_pwm_gpio); > + parser->panel_pwm_gpio = NULL; > + DRM_ERROR("%s: cannot get panel-pwm gpio, %d\n", __func__, ret); > + goto fail; > + } Just setting the GPIOs to high on initialization and then leaving them unattended doesn't look right. I saw Stephen already pointed towards drivers/video/backlight/pwm_bl.c. > + > + DRM_INFO("gpio on"); > +fail: > + return 0; This function always returns 0, either the return type should be void, or it should return a different value in the error case > +} > + > static int dp_parser_parse(struct dp_parser *parser) > { > int rc = 0; > @@ -269,6 +296,10 @@ static int dp_parser_parse(struct dp_parser *parser) > if (rc) > return rc; > > + rc = dp_parser_gpio(parser); > + if (rc) > + return rc; The function never returns a non-zero value (see above).
On Thu 12 Aug 19:28 CDT 2021, sbillaka@codeaurora.org wrote: > On 2021-08-12 06:11, Stephen Boyd wrote: > > Quoting Sankeerth Billakanti (2021-08-11 17:08:01) [..] > > > +static int dp_parser_gpio(struct dp_parser *parser) > > > +{ > > > + struct device *dev = &parser->pdev->dev; > > > + int ret; > > > + > > > + parser->panel_bklt_gpio = devm_gpiod_get(dev, "panel-bklt", > > > + GPIOD_OUT_HIGH); > > > + if (IS_ERR(parser->panel_bklt_gpio)) { > > > + ret = PTR_ERR(parser->panel_bklt_gpio); > > > + parser->panel_bklt_gpio = NULL; > > > + DRM_ERROR("%s: cannot get panel-bklt gpio, %d\n", > > > __func__, ret); > > > + goto fail; > > > + } > > > + > > > + parser->panel_pwm_gpio = devm_gpiod_get(dev, "panel-pwm", > > > GPIOD_OUT_HIGH); > > > + if (IS_ERR(parser->panel_pwm_gpio)) { > > > + ret = PTR_ERR(parser->panel_pwm_gpio); > > > + parser->panel_pwm_gpio = NULL; > > > + DRM_ERROR("%s: cannot get panel-pwm gpio, %d\n", > > > __func__, ret); > > > + goto fail; > > > + } > > > + > > > + DRM_INFO("gpio on"); > > > +fail: > > > + return 0; > > > +} > > > > Don't we have pwm backlight drivers like > > drivers/video/backlight/pwm_bl.c to support this? This sort of thing > > doesn't belong in the dp driver. > > Okay. I will explore it. > I proposed that we attach a drm_panel and allow that to control the (pwm-)backlight. Here's the link for the DP patch: https://lore.kernel.org/linux-arm-msm/20210726231351.655302-1-bjorn.andersson@linaro.org/ Regards, Bjorn
Quoting Sankeerth Billakanti (2021-08-11 17:08:01) > The eDP controller on SC7280 is similar to the eDP/DP controllers > supported by the current driver implementation. > > SC7280 supports one EDP and one DP controller which can operate > concurrently. > > The following are some required changes for the sc7280 sink: > 1. Additional gpio configuration for backlight and pwm via pmic. > 2. ASSR support programming on the sink. > 3. SSC support programming on the sink. > > Signed-off-by: Sankeerth Billakanti <sbillaka@codeaurora.org> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 4 ++-- > drivers/gpu/drm/msm/dp/dp_ctrl.c | 19 +++++++++++++++ > drivers/gpu/drm/msm/dp/dp_display.c | 32 ++++++++++++++++++++++++-- > drivers/gpu/drm/msm/dp/dp_parser.c | 31 +++++++++++++++++++++++++ > drivers/gpu/drm/msm/dp/dp_parser.h | 5 ++++ > 5 files changed, 87 insertions(+), 4 deletions(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > index b131fd37..1096c44 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > @@ -856,9 +856,9 @@ static const struct dpu_intf_cfg sm8150_intf[] = { > }; > > static const struct dpu_intf_cfg sc7280_intf[] = { > - INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25), > + INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, 1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25), > INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27), > - INTF_BLK("intf_5", INTF_5, 0x39000, INTF_EDP, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), > + INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), Why is this INTF_5? Instead of INTF_2? I noticed that if I changed it to INTF_2 that I could get external DP to work but not the internal eDP. Then changing it back to INTF_5 got eDP interface working but not DP. I also noticed that we changed it from INTF_EDP to INTF_DP for the eDP hardware. Can you please explain this struct? I looked at it and I still don't understand what's going on. The index (fifth element above) seems to need to match the index that is set for the address in sc7280_edp_cfg[]. If the two don't match things don't seem to work either. But then I also tried flipping that and still things didn't work. Does that index matter? Or can the first INTF_DP be 0 still?
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c index b131fd37..1096c44 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c @@ -856,9 +856,9 @@ static const struct dpu_intf_cfg sm8150_intf[] = { }; static const struct dpu_intf_cfg sc7280_intf[] = { - INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25), + INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, 1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25), INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27), - INTF_BLK("intf_5", INTF_5, 0x39000, INTF_EDP, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), + INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), }; /************************************************************* diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c index d2569da..06d5a2d 100644 --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c @@ -1244,7 +1244,9 @@ static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl, struct dp_cr_status *cr, int *training_step) { int ret = 0; + u8 *dpcd = ctrl->panel->dpcd; u8 encoding = DP_SET_ANSI_8B10B; + u8 ssc = 0, assr = 0; struct dp_link_info link_info = {0}; dp_ctrl_config_ctrl(ctrl); @@ -1254,9 +1256,21 @@ static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl, link_info.capabilities = DP_LINK_CAP_ENHANCED_FRAMING; dp_aux_link_configure(ctrl->aux, &link_info); + + if (dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5) { + ssc = DP_SPREAD_AMP_0_5; + drm_dp_dpcd_write(ctrl->aux, DP_DOWNSPREAD_CTRL, &ssc, 1); + } + drm_dp_dpcd_write(ctrl->aux, DP_MAIN_LINK_CHANNEL_CODING_SET, &encoding, 1); + if (dpcd[DP_EDP_CONFIGURATION_CAP] & DP_ALTERNATE_SCRAMBLER_RESET_CAP) { + assr = DP_ALTERNATE_SCRAMBLER_RESET_ENABLE; + drm_dp_dpcd_write(ctrl->aux, DP_EDP_CONFIGURATION_SET, + &assr, 1); + } + ret = dp_ctrl_link_train_1(ctrl, cr, training_step); if (ret) { DRM_ERROR("link training #1 failed. ret=%d\n", ret); @@ -1328,9 +1342,11 @@ static int dp_ctrl_enable_mainlink_clocks(struct dp_ctrl_private *ctrl) struct dp_io *dp_io = &ctrl->parser->io; struct phy *phy = dp_io->phy; struct phy_configure_opts_dp *opts_dp = &dp_io->phy_opts.dp; + u8 *dpcd = ctrl->panel->dpcd; opts_dp->lanes = ctrl->link->link_params.num_lanes; opts_dp->link_rate = ctrl->link->link_params.rate / 100; + opts_dp->ssc = dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5; dp_ctrl_set_clock_rate(ctrl, DP_CTRL_PM, "ctrl_link", ctrl->link->link_params.rate * 1000); @@ -1760,6 +1776,9 @@ int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl) ctrl->link->link_params.num_lanes = ctrl->panel->link_info.num_lanes; ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock; + if (ctrl->dp_ctrl.pixel_rate == 0) + return -EINVAL; + DRM_DEBUG_DP("rate=%d, num_lanes=%d, pixel_rate=%d\n", ctrl->link->link_params.rate, ctrl->link->link_params.num_lanes, ctrl->dp_ctrl.pixel_rate); diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c index ee5bf64..a772290 100644 --- a/drivers/gpu/drm/msm/dp/dp_display.c +++ b/drivers/gpu/drm/msm/dp/dp_display.c @@ -117,8 +117,36 @@ struct dp_display_private { struct dp_audio *audio; }; +struct msm_dp_config { + phys_addr_t io_start[3]; + size_t num_dp; +}; + +static const struct msm_dp_config sc7180_dp_cfg = { + .io_start = { 0x0ae90000 }, + .num_dp = 1, +}; + +static const struct msm_dp_config sc8180x_dp_cfg = { + .io_start = { 0xae90000, 0xae98000, 0 }, + .num_dp = 3, +}; + +static const struct msm_dp_config sc8180x_edp_cfg = { + .io_start = { 0, 0, 0xae9a000 }, + .num_dp = 3, +}; + +static const struct msm_dp_config sc7280_edp_cfg = { + .io_start = { 0xaea0000, 0 }, + .num_dp = 2, +}; + static const struct of_device_id dp_dt_match[] = { - {.compatible = "qcom,sc7180-dp"}, + { .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_cfg }, + { .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_cfg }, + { .compatible = "qcom,sc8180x-edp", .data = &sc8180x_edp_cfg }, + { .compatible = "qcom,sc7280-edp", .data = &sc7280_edp_cfg }, {} }; @@ -1408,7 +1436,7 @@ void msm_dp_irq_postinstall(struct msm_dp *dp_display) dp_hpd_event_setup(dp); - dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 100); + dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 1); } void msm_dp_debugfs_init(struct msm_dp *dp_display, struct drm_minor *minor) diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c b/drivers/gpu/drm/msm/dp/dp_parser.c index 0519dd3..c05fc0a 100644 --- a/drivers/gpu/drm/msm/dp/dp_parser.c +++ b/drivers/gpu/drm/msm/dp/dp_parser.c @@ -248,6 +248,33 @@ static int dp_parser_clock(struct dp_parser *parser) return 0; } +static int dp_parser_gpio(struct dp_parser *parser) +{ + struct device *dev = &parser->pdev->dev; + int ret; + + parser->panel_bklt_gpio = devm_gpiod_get(dev, "panel-bklt", + GPIOD_OUT_HIGH); + if (IS_ERR(parser->panel_bklt_gpio)) { + ret = PTR_ERR(parser->panel_bklt_gpio); + parser->panel_bklt_gpio = NULL; + DRM_ERROR("%s: cannot get panel-bklt gpio, %d\n", __func__, ret); + goto fail; + } + + parser->panel_pwm_gpio = devm_gpiod_get(dev, "panel-pwm", GPIOD_OUT_HIGH); + if (IS_ERR(parser->panel_pwm_gpio)) { + ret = PTR_ERR(parser->panel_pwm_gpio); + parser->panel_pwm_gpio = NULL; + DRM_ERROR("%s: cannot get panel-pwm gpio, %d\n", __func__, ret); + goto fail; + } + + DRM_INFO("gpio on"); +fail: + return 0; +} + static int dp_parser_parse(struct dp_parser *parser) { int rc = 0; @@ -269,6 +296,10 @@ static int dp_parser_parse(struct dp_parser *parser) if (rc) return rc; + rc = dp_parser_gpio(parser); + if (rc) + return rc; + /* Map the corresponding regulator information according to * version. Currently, since we only have one supported platform, * mapping the regulator directly. diff --git a/drivers/gpu/drm/msm/dp/dp_parser.h b/drivers/gpu/drm/msm/dp/dp_parser.h index 34b4962..7e94bbf 100644 --- a/drivers/gpu/drm/msm/dp/dp_parser.h +++ b/drivers/gpu/drm/msm/dp/dp_parser.h @@ -9,6 +9,7 @@ #include <linux/platform_device.h> #include <linux/phy/phy.h> #include <linux/phy/phy-dp.h> +#include <linux/gpio/consumer.h> #include "dpu_io_util.h" #include "msm_drv.h" @@ -112,6 +113,10 @@ struct dp_parser { struct platform_device *pdev; struct dss_module_power mp[DP_MAX_PM]; struct dp_pinctrl pinctrl; + + struct gpio_desc *panel_bklt_gpio; + struct gpio_desc *panel_pwm_gpio; + struct dp_io io; struct dp_display_data disp_data; const struct dp_regulator_cfg *regulator_cfg;
The eDP controller on SC7280 is similar to the eDP/DP controllers supported by the current driver implementation. SC7280 supports one EDP and one DP controller which can operate concurrently. The following are some required changes for the sc7280 sink: 1. Additional gpio configuration for backlight and pwm via pmic. 2. ASSR support programming on the sink. 3. SSC support programming on the sink. Signed-off-by: Sankeerth Billakanti <sbillaka@codeaurora.org> --- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 4 ++-- drivers/gpu/drm/msm/dp/dp_ctrl.c | 19 +++++++++++++++ drivers/gpu/drm/msm/dp/dp_display.c | 32 ++++++++++++++++++++++++-- drivers/gpu/drm/msm/dp/dp_parser.c | 31 +++++++++++++++++++++++++ drivers/gpu/drm/msm/dp/dp_parser.h | 5 ++++ 5 files changed, 87 insertions(+), 4 deletions(-)