diff mbox series

[V7] gpio: Add virtio-gpio driver

Message ID 56ca9b1fc803e393a67e875bed4f900c6a432085.1629347189.git.viresh.kumar@linaro.org
State Accepted
Commit 3a29355a22c0275fe864100794fee58a73175d93
Headers show
Series [V7] gpio: Add virtio-gpio driver | expand

Commit Message

Viresh Kumar Aug. 19, 2021, 4:30 a.m. UTC
This patch adds a new driver for Virtio based GPIO devices.

This allows a guest VM running Linux to access GPIO lines provided by
the host. It supports all basic operations, except interrupts for the
GPIO lines.

Based on the initial work posted by:
"Enrico Weigelt, metux IT consult" <lkml@metux.net>.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
Bartosz,

Can you please pick this up for 5.15, the specification is already merged now:

https://github.com/oasis-tcs/virtio-spec/blob/master/virtio-gpio.tex

I will follow up with the IRQ stuff separately.

V6->V7:
- Fixed a coccinelle warning.

V5->V6:
- Sent separately, without irq-support.
- Include the change for virtio_ids.h.

 MAINTAINERS                      |   7 +
 drivers/gpio/Kconfig             |   9 +
 drivers/gpio/Makefile            |   1 +
 drivers/gpio/gpio-virtio.c       | 375 +++++++++++++++++++++++++++++++
 include/uapi/linux/virtio_gpio.h |  47 ++++
 include/uapi/linux/virtio_ids.h  |   1 +
 6 files changed, 440 insertions(+)
 create mode 100644 drivers/gpio/gpio-virtio.c
 create mode 100644 include/uapi/linux/virtio_gpio.h

-- 
2.31.1.272.g89b43f80a514

Comments

Bartosz Golaszewski Aug. 23, 2021, 7:52 a.m. UTC | #1
On Thu, Aug 19, 2021 at 6:30 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>

> This patch adds a new driver for Virtio based GPIO devices.

>

> This allows a guest VM running Linux to access GPIO lines provided by

> the host. It supports all basic operations, except interrupts for the

> GPIO lines.

>

> Based on the initial work posted by:

> "Enrico Weigelt, metux IT consult" <lkml@metux.net>.

>

> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

> ---

> Bartosz,

>

> Can you please pick this up for 5.15, the specification is already merged now:

>

> https://github.com/oasis-tcs/virtio-spec/blob/master/virtio-gpio.tex

>

> I will follow up with the IRQ stuff separately.

>


Applied, thanks!

Bart
Michael S. Tsirkin Aug. 31, 2021, 6:26 a.m. UTC | #2
On Mon, Aug 23, 2021 at 09:52:22AM +0200, Bartosz Golaszewski wrote:
> On Thu, Aug 19, 2021 at 6:30 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:

> >

> > This patch adds a new driver for Virtio based GPIO devices.

> >

> > This allows a guest VM running Linux to access GPIO lines provided by

> > the host. It supports all basic operations, except interrupts for the

> > GPIO lines.

> >

> > Based on the initial work posted by:

> > "Enrico Weigelt, metux IT consult" <lkml@metux.net>.

> >

> > Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

> > ---

> > Bartosz,

> >

> > Can you please pick this up for 5.15, the specification is already merged now:

> >

> > https://github.com/oasis-tcs/virtio-spec/blob/master/virtio-gpio.tex

> >

> > I will follow up with the IRQ stuff separately.

> >

> 

> Applied, thanks!

> 

> Bart


Um. didn't expect this to be applied yet, the driver is not
sparse clean, kernel build bot gave some other warnings too.
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index a61f4f3b78a9..f632acd7d98c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19647,6 +19647,13 @@  F:	Documentation/filesystems/virtiofs.rst
 F:	fs/fuse/virtio_fs.c
 F:	include/uapi/linux/virtio_fs.h
 
+VIRTIO GPIO DRIVER
+M:	Enrico Weigelt, metux IT consult <info@metux.net>
+M:	Viresh Kumar <vireshk@kernel.org>
+S:	Maintained
+F:	drivers/gpio/gpio-virtio.c
+F:	include/uapi/linux/virtio_gpio.h
+
 VIRTIO GPU DRIVER
 M:	David Airlie <airlied@linux.ie>
 M:	Gerd Hoffmann <kraxel@redhat.com>
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index fab571016adf..e5993d6864fb 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1669,6 +1669,15 @@  config GPIO_MOCKUP
 	  tools/testing/selftests/gpio/gpio-mockup.sh. Reference the usage in
 	  it.
 
+config GPIO_VIRTIO
+	tristate "VirtIO GPIO support"
+	depends on VIRTIO
+	help
+	  Say Y here to enable guest support for virtio-based GPIO controllers.
+
+	  These virtual GPIOs can be routed to real GPIOs or attached to
+	  simulators on the host (like QEMU).
+
 endmenu
 
 endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 32a32659866a..e0301cfedd8d 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -165,6 +165,7 @@  obj-$(CONFIG_GPIO_UCB1400)		+= gpio-ucb1400.o
 obj-$(CONFIG_GPIO_UNIPHIER)		+= gpio-uniphier.o
 obj-$(CONFIG_GPIO_VF610)		+= gpio-vf610.o
 obj-$(CONFIG_GPIO_VIPERBOARD)		+= gpio-viperboard.o
+obj-$(CONFIG_GPIO_VIRTIO)		+= gpio-virtio.o
 obj-$(CONFIG_GPIO_VISCONTI)		+= gpio-visconti.o
 obj-$(CONFIG_GPIO_VR41XX)		+= gpio-vr41xx.o
 obj-$(CONFIG_GPIO_VX855)		+= gpio-vx855.o
diff --git a/drivers/gpio/gpio-virtio.c b/drivers/gpio/gpio-virtio.c
new file mode 100644
index 000000000000..d33eb237c0b9
--- /dev/null
+++ b/drivers/gpio/gpio-virtio.c
@@ -0,0 +1,375 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * GPIO driver for virtio-based virtual GPIO controllers
+ *
+ * Copyright (C) 2021 metux IT consult
+ * Enrico Weigelt, metux IT consult <info@metux.net>
+ *
+ * Copyright (C) 2021 Linaro.
+ * Viresh Kumar <viresh.kumar@linaro.org>
+ */
+
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/virtio_config.h>
+#include <uapi/linux/virtio_gpio.h>
+#include <uapi/linux/virtio_ids.h>
+
+struct virtio_gpio_line {
+	struct mutex lock; /* Protects line operation */
+	struct completion completion;
+	struct virtio_gpio_request req ____cacheline_aligned;
+	struct virtio_gpio_response res ____cacheline_aligned;
+	unsigned int rxlen;
+};
+
+struct virtio_gpio {
+	struct virtio_device *vdev;
+	struct mutex lock; /* Protects virtqueue operation */
+	struct gpio_chip gc;
+	struct virtio_gpio_config config;
+	struct virtio_gpio_line *lines;
+	struct virtqueue *request_vq;
+};
+
+static int _virtio_gpio_req(struct virtio_gpio *vgpio, u16 type, u16 gpio,
+			    u8 txvalue, u8 *rxvalue, void *response, u32 rxlen)
+{
+	struct virtio_gpio_line *line = &vgpio->lines[gpio];
+	struct virtio_gpio_request *req = &line->req;
+	struct virtio_gpio_response *res = response;
+	struct scatterlist *sgs[2], req_sg, res_sg;
+	struct device *dev = &vgpio->vdev->dev;
+	int ret;
+
+	/*
+	 * Prevent concurrent requests for the same line since we have
+	 * pre-allocated request/response buffers for each GPIO line. Moreover
+	 * Linux always accesses a GPIO line sequentially, so this locking shall
+	 * always go through without any delays.
+	 */
+	mutex_lock(&line->lock);
+
+	req->type = cpu_to_le16(type);
+	req->gpio = cpu_to_le16(gpio);
+	req->value = txvalue;
+
+	sg_init_one(&req_sg, req, sizeof(*req));
+	sg_init_one(&res_sg, res, rxlen);
+	sgs[0] = &req_sg;
+	sgs[1] = &res_sg;
+
+	line->rxlen = 0;
+	reinit_completion(&line->completion);
+
+	/*
+	 * Virtqueue callers need to ensure they don't call its APIs with other
+	 * virtqueue operations at the same time.
+	 */
+	mutex_lock(&vgpio->lock);
+	ret = virtqueue_add_sgs(vgpio->request_vq, sgs, 1, 1, line, GFP_KERNEL);
+	if (ret) {
+		dev_err(dev, "failed to add request to vq\n");
+		mutex_unlock(&vgpio->lock);
+		goto out;
+	}
+
+	virtqueue_kick(vgpio->request_vq);
+	mutex_unlock(&vgpio->lock);
+
+	if (!wait_for_completion_timeout(&line->completion, HZ)) {
+		dev_err(dev, "GPIO operation timed out\n");
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	if (unlikely(res->status != VIRTIO_GPIO_STATUS_OK)) {
+		dev_err(dev, "GPIO request failed: %d\n", gpio);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (unlikely(line->rxlen != rxlen)) {
+		dev_err(dev, "GPIO operation returned incorrect len (%u : %u)\n",
+			rxlen, line->rxlen);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (rxvalue)
+		*rxvalue = res->value;
+
+out:
+	mutex_unlock(&line->lock);
+	return ret;
+}
+
+static int virtio_gpio_req(struct virtio_gpio *vgpio, u16 type, u16 gpio,
+			   u8 txvalue, u8 *rxvalue)
+{
+	struct virtio_gpio_line *line = &vgpio->lines[gpio];
+	struct virtio_gpio_response *res = &line->res;
+
+	return _virtio_gpio_req(vgpio, type, gpio, txvalue, rxvalue, res,
+				sizeof(*res));
+}
+
+static void virtio_gpio_free(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct virtio_gpio *vgpio = gpiochip_get_data(gc);
+
+	virtio_gpio_req(vgpio, VIRTIO_GPIO_MSG_SET_DIRECTION, gpio,
+			VIRTIO_GPIO_DIRECTION_NONE, NULL);
+}
+
+static int virtio_gpio_get_direction(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct virtio_gpio *vgpio = gpiochip_get_data(gc);
+	u8 direction;
+	int ret;
+
+	ret = virtio_gpio_req(vgpio, VIRTIO_GPIO_MSG_GET_DIRECTION, gpio, 0,
+			      &direction);
+	if (ret)
+		return ret;
+
+	switch (direction) {
+	case VIRTIO_GPIO_DIRECTION_IN:
+		return GPIO_LINE_DIRECTION_IN;
+	case VIRTIO_GPIO_DIRECTION_OUT:
+		return GPIO_LINE_DIRECTION_OUT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int virtio_gpio_direction_input(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct virtio_gpio *vgpio = gpiochip_get_data(gc);
+
+	return virtio_gpio_req(vgpio, VIRTIO_GPIO_MSG_SET_DIRECTION, gpio,
+			       VIRTIO_GPIO_DIRECTION_IN, NULL);
+}
+
+static int virtio_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio,
+					int value)
+{
+	struct virtio_gpio *vgpio = gpiochip_get_data(gc);
+	int ret;
+
+	ret = virtio_gpio_req(vgpio, VIRTIO_GPIO_MSG_SET_VALUE, gpio, value, NULL);
+	if (ret)
+		return ret;
+
+	return virtio_gpio_req(vgpio, VIRTIO_GPIO_MSG_SET_DIRECTION, gpio,
+			       VIRTIO_GPIO_DIRECTION_OUT, NULL);
+}
+
+static int virtio_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct virtio_gpio *vgpio = gpiochip_get_data(gc);
+	u8 value;
+	int ret;
+
+	ret = virtio_gpio_req(vgpio, VIRTIO_GPIO_MSG_GET_VALUE, gpio, 0, &value);
+	return ret ? ret : value;
+}
+
+static void virtio_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct virtio_gpio *vgpio = gpiochip_get_data(gc);
+
+	virtio_gpio_req(vgpio, VIRTIO_GPIO_MSG_SET_VALUE, gpio, value, NULL);
+}
+
+static void virtio_gpio_request_vq(struct virtqueue *vq)
+{
+	struct virtio_gpio_line *line;
+	unsigned int len;
+
+	do {
+		line = virtqueue_get_buf(vq, &len);
+		if (!line)
+			return;
+
+		line->rxlen = len;
+		complete(&line->completion);
+	} while (1);
+}
+
+static void virtio_gpio_free_vqs(struct virtio_device *vdev)
+{
+	vdev->config->reset(vdev);
+	vdev->config->del_vqs(vdev);
+}
+
+static int virtio_gpio_alloc_vqs(struct virtio_gpio *vgpio,
+				 struct virtio_device *vdev)
+{
+	const char * const names[] = { "requestq" };
+	vq_callback_t *cbs[] = {
+		virtio_gpio_request_vq,
+	};
+	struct virtqueue *vqs[1] = { NULL };
+	int ret;
+
+	ret = virtio_find_vqs(vdev, 1, vqs, cbs, names, NULL);
+	if (ret) {
+		dev_err(&vdev->dev, "failed to find vqs: %d\n", ret);
+		return ret;
+	}
+
+	if (!vqs[0]) {
+		dev_err(&vdev->dev, "failed to find requestq vq\n");
+		return -ENODEV;
+	}
+	vgpio->request_vq = vqs[0];
+
+	return 0;
+}
+
+static const char **virtio_gpio_get_names(struct virtio_gpio *vgpio)
+{
+	struct virtio_gpio_config *config = &vgpio->config;
+	struct virtio_gpio_response_get_names *res;
+	struct device *dev = &vgpio->vdev->dev;
+	u8 *gpio_names, *str;
+	const char **names;
+	int i, ret, len;
+
+	if (!config->gpio_names_size)
+		return NULL;
+
+	len = sizeof(*res) + config->gpio_names_size;
+	res = devm_kzalloc(dev, len, GFP_KERNEL);
+	if (!res)
+		return NULL;
+	gpio_names = res->value;
+
+	ret = _virtio_gpio_req(vgpio, VIRTIO_GPIO_MSG_GET_NAMES, 0, 0, NULL,
+			       res, len);
+	if (ret) {
+		dev_err(dev, "Failed to get GPIO names: %d\n", ret);
+		return NULL;
+	}
+
+	names = devm_kcalloc(dev, config->ngpio, sizeof(*names), GFP_KERNEL);
+	if (!names)
+		return NULL;
+
+	/* NULL terminate the string instead of checking it */
+	gpio_names[config->gpio_names_size - 1] = '\0';
+
+	for (i = 0, str = gpio_names; i < config->ngpio; i++) {
+		names[i] = str;
+		str += strlen(str) + 1; /* zero-length strings are allowed */
+
+		if (str > gpio_names + config->gpio_names_size) {
+			dev_err(dev, "gpio_names block is too short (%d)\n", i);
+			return NULL;
+		}
+	}
+
+	return names;
+}
+
+static int virtio_gpio_probe(struct virtio_device *vdev)
+{
+	struct virtio_gpio_config *config;
+	struct device *dev = &vdev->dev;
+	struct virtio_gpio *vgpio;
+	int ret, i;
+
+	vgpio = devm_kzalloc(dev, sizeof(*vgpio), GFP_KERNEL);
+	if (!vgpio)
+		return -ENOMEM;
+
+	config = &vgpio->config;
+
+	/* Read configuration */
+	virtio_cread_bytes(vdev, 0, config, sizeof(*config));
+	config->gpio_names_size = le32_to_cpu(config->gpio_names_size);
+	config->ngpio = le16_to_cpu(config->ngpio);
+	if (!config->ngpio) {
+		dev_err(dev, "Number of GPIOs can't be zero\n");
+		return -EINVAL;
+	}
+
+	vgpio->lines = devm_kcalloc(dev, config->ngpio, sizeof(*vgpio->lines), GFP_KERNEL);
+	if (!vgpio->lines)
+		return -ENOMEM;
+
+	for (i = 0; i < config->ngpio; i++) {
+		mutex_init(&vgpio->lines[i].lock);
+		init_completion(&vgpio->lines[i].completion);
+	}
+
+	mutex_init(&vgpio->lock);
+	vdev->priv = vgpio;
+
+	vgpio->vdev			= vdev;
+	vgpio->gc.free			= virtio_gpio_free;
+	vgpio->gc.get_direction		= virtio_gpio_get_direction;
+	vgpio->gc.direction_input	= virtio_gpio_direction_input;
+	vgpio->gc.direction_output	= virtio_gpio_direction_output;
+	vgpio->gc.get			= virtio_gpio_get;
+	vgpio->gc.set			= virtio_gpio_set;
+	vgpio->gc.ngpio			= config->ngpio;
+	vgpio->gc.base			= -1; /* Allocate base dynamically */
+	vgpio->gc.label			= dev_name(dev);
+	vgpio->gc.parent		= dev;
+	vgpio->gc.owner			= THIS_MODULE;
+	vgpio->gc.can_sleep		= true;
+
+	ret = virtio_gpio_alloc_vqs(vgpio, vdev);
+	if (ret)
+		return ret;
+
+	/* Mark the device ready to perform operations from within probe() */
+	virtio_device_ready(vdev);
+
+	vgpio->gc.names = virtio_gpio_get_names(vgpio);
+
+	ret = gpiochip_add_data(&vgpio->gc, vgpio);
+	if (ret) {
+		virtio_gpio_free_vqs(vdev);
+		dev_err(dev, "Failed to add virtio-gpio controller\n");
+	}
+
+	return ret;
+}
+
+static void virtio_gpio_remove(struct virtio_device *vdev)
+{
+	struct virtio_gpio *vgpio = vdev->priv;
+
+	gpiochip_remove(&vgpio->gc);
+	virtio_gpio_free_vqs(vdev);
+}
+
+static const struct virtio_device_id id_table[] = {
+	{ VIRTIO_ID_GPIO, VIRTIO_DEV_ANY_ID },
+	{},
+};
+MODULE_DEVICE_TABLE(virtio, id_table);
+
+static struct virtio_driver virtio_gpio_driver = {
+	.id_table		= id_table,
+	.probe			= virtio_gpio_probe,
+	.remove			= virtio_gpio_remove,
+	.driver			= {
+		.name		= KBUILD_MODNAME,
+		.owner		= THIS_MODULE,
+	},
+};
+module_virtio_driver(virtio_gpio_driver);
+
+MODULE_AUTHOR("Enrico Weigelt, metux IT consult <info@metux.net>");
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
+MODULE_DESCRIPTION("VirtIO GPIO driver");
+MODULE_LICENSE("GPL");
diff --git a/include/uapi/linux/virtio_gpio.h b/include/uapi/linux/virtio_gpio.h
new file mode 100644
index 000000000000..844574acf095
--- /dev/null
+++ b/include/uapi/linux/virtio_gpio.h
@@ -0,0 +1,47 @@ 
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+
+#ifndef _LINUX_VIRTIO_GPIO_H
+#define _LINUX_VIRTIO_GPIO_H
+
+#include <linux/types.h>
+
+/* Virtio GPIO request types */
+#define VIRTIO_GPIO_MSG_GET_NAMES		0x0001
+#define VIRTIO_GPIO_MSG_GET_DIRECTION		0x0002
+#define VIRTIO_GPIO_MSG_SET_DIRECTION		0x0003
+#define VIRTIO_GPIO_MSG_GET_VALUE		0x0004
+#define VIRTIO_GPIO_MSG_SET_VALUE		0x0005
+
+/* Possible values of the status field */
+#define VIRTIO_GPIO_STATUS_OK			0x0
+#define VIRTIO_GPIO_STATUS_ERR			0x1
+
+/* Direction types */
+#define VIRTIO_GPIO_DIRECTION_NONE		0x00
+#define VIRTIO_GPIO_DIRECTION_OUT		0x01
+#define VIRTIO_GPIO_DIRECTION_IN		0x02
+
+struct virtio_gpio_config {
+	__u16 ngpio;
+	__u8 padding[2];
+	__u32 gpio_names_size;
+} __packed;
+
+/* Virtio GPIO Request / Response */
+struct virtio_gpio_request {
+	__u16 type;
+	__u16 gpio;
+	__u32 value;
+};
+
+struct virtio_gpio_response {
+	__u8 status;
+	__u8 value;
+};
+
+struct virtio_gpio_response_get_names {
+	__u8 status;
+	__u8 value[];
+};
+
+#endif /* _LINUX_VIRTIO_GPIO_H */
diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h
index 70a8057ad4bb..e04fa2bfc0eb 100644
--- a/include/uapi/linux/virtio_ids.h
+++ b/include/uapi/linux/virtio_ids.h
@@ -56,6 +56,7 @@ 
 #define VIRTIO_ID_PMEM			27 /* virtio pmem */
 #define VIRTIO_ID_MAC80211_HWSIM	29 /* virtio mac80211-hwsim */
 #define VIRTIO_ID_BT			40 /* virtio bluetooth */
+#define VIRTIO_ID_GPIO			41 /* virtio gpio */
 
 /*
  * Virtio Transitional IDs