deleted file mode 100644
@@ -1,22 +0,0 @@
-What: /sys/devices/*/<our-device>/eeprom
-Date: August 2013
-Contact: Oliver Schinagl <oliver@schinagl.nl>
-Description: read-only access to the SID (Security-ID) on current
- A-series SoC's from Allwinner. Currently supports A10, A10s, A13
- and A20 CPU's. The earlier A1x series of SoCs exports 16 bytes,
- whereas the newer A20 SoC exposes 512 bytes split into sections.
- Besides the 16 bytes of SID, there's also an SJTAG area,
- HDMI-HDCP key and some custom keys. Below a quick overview, for
- details see the user manual:
- 0x000 128 bit root-key (sun[457]i)
- 0x010 128 bit boot-key (sun7i)
- 0x020 64 bit security-jtag-key (sun7i)
- 0x028 16 bit key configuration (sun7i)
- 0x02b 16 bit custom-vendor-key (sun7i)
- 0x02c 320 bit low general key (sun7i)
- 0x040 32 bit read-control access (sun7i)
- 0x064 224 bit low general key (sun7i)
- 0x080 2304 bit HDCP-key (sun7i)
- 0x1a0 768 bit high general key (sun7i)
-Users: any user space application which wants to read the SID on
- Allwinner's A-series of CPU's.
deleted file mode 100644
@@ -1,17 +0,0 @@
-Allwinner sunxi-sid
-
-Required properties:
-- compatible: "allwinner,sun4i-a10-sid" or "allwinner,sun7i-a20-sid"
-- reg: Should contain registers location and length
-
-Example for sun4i:
- sid@01c23800 {
- compatible = "allwinner,sun4i-a10-sid";
- reg = <0x01c23800 0x10>
- };
-
-Example for sun7i:
- sid@01c23800 {
- compatible = "allwinner,sun7i-a20-sid";
- reg = <0x01c23800 0x200>
- };
new file mode 100644
@@ -0,0 +1,21 @@
+Allwinner sunxi-sid
+
+Required properties:
+- compatible: "allwinner,sun4i-a10-sid" or "allwinner,sun7i-a20-sid"
+- reg: Should contain registers location and length
+
+= Data cells =
+Are child nodes of qfprom, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+Example for sun4i:
+ sid@01c23800 {
+ compatible = "allwinner,sun4i-a10-sid";
+ reg = <0x01c23800 0x10>
+ };
+
+Example for sun7i:
+ sid@01c23800 {
+ compatible = "allwinner,sun7i-a20-sid";
+ reg = <0x01c23800 0x200>
+ };
@@ -96,17 +96,4 @@ config EEPROM_DIGSY_MTC_CFG
If unsure, say N.
-config EEPROM_SUNXI_SID
- tristate "Allwinner sunxi security ID support"
- depends on ARCH_SUNXI && SYSFS
- help
- This is a driver for the 'security ID' available on various Allwinner
- devices.
-
- Due to the potential risks involved with changing e-fuses,
- this driver is read-only.
-
- This driver can also be built as a module. If so, the module
- will be called sunxi_sid.
-
endmenu
@@ -4,5 +4,4 @@ obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o
obj-$(CONFIG_EEPROM_MAX6875) += max6875.o
obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
obj-$(CONFIG_EEPROM_93XX46) += eeprom_93xx46.o
-obj-$(CONFIG_EEPROM_SUNXI_SID) += sunxi_sid.o
obj-$(CONFIG_EEPROM_DIGSY_MTC_CFG) += digsy_mtc_eeprom.o
deleted file mode 100644
@@ -1,156 +0,0 @@
-/*
- * Copyright (c) 2013 Oliver Schinagl <oliver@schinagl.nl>
- * http://www.linux-sunxi.org
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * This driver exposes the Allwinner security ID, efuses exported in byte-
- * sized chunks.
- */
-
-#include <linux/compiler.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/export.h>
-#include <linux/fs.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/kobject.h>
-#include <linux/module.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
-#include <linux/random.h>
-#include <linux/slab.h>
-#include <linux/stat.h>
-#include <linux/sysfs.h>
-#include <linux/types.h>
-
-#define DRV_NAME "sunxi-sid"
-
-struct sunxi_sid_data {
- void __iomem *reg_base;
- unsigned int keysize;
-};
-
-/* We read the entire key, due to a 32 bit read alignment requirement. Since we
- * want to return the requested byte, this results in somewhat slower code and
- * uses 4 times more reads as needed but keeps code simpler. Since the SID is
- * only very rarely probed, this is not really an issue.
- */
-static u8 sunxi_sid_read_byte(const struct sunxi_sid_data *sid_data,
- const unsigned int offset)
-{
- u32 sid_key;
-
- if (offset >= sid_data->keysize)
- return 0;
-
- sid_key = ioread32be(sid_data->reg_base + round_down(offset, 4));
- sid_key >>= (offset % 4) * 8;
-
- return sid_key; /* Only return the last byte */
-}
-
-static ssize_t sid_read(struct file *fd, struct kobject *kobj,
- struct bin_attribute *attr, char *buf,
- loff_t pos, size_t size)
-{
- struct platform_device *pdev;
- struct sunxi_sid_data *sid_data;
- int i;
-
- pdev = to_platform_device(kobj_to_dev(kobj));
- sid_data = platform_get_drvdata(pdev);
-
- if (pos < 0 || pos >= sid_data->keysize)
- return 0;
- if (size > sid_data->keysize - pos)
- size = sid_data->keysize - pos;
-
- for (i = 0; i < size; i++)
- buf[i] = sunxi_sid_read_byte(sid_data, pos + i);
-
- return i;
-}
-
-static struct bin_attribute sid_bin_attr = {
- .attr = { .name = "eeprom", .mode = S_IRUGO, },
- .read = sid_read,
-};
-
-static int sunxi_sid_remove(struct platform_device *pdev)
-{
- device_remove_bin_file(&pdev->dev, &sid_bin_attr);
- dev_dbg(&pdev->dev, "driver unloaded\n");
-
- return 0;
-}
-
-static const struct of_device_id sunxi_sid_of_match[] = {
- { .compatible = "allwinner,sun4i-a10-sid", .data = (void *)16},
- { .compatible = "allwinner,sun7i-a20-sid", .data = (void *)512},
- {/* sentinel */},
-};
-MODULE_DEVICE_TABLE(of, sunxi_sid_of_match);
-
-static int sunxi_sid_probe(struct platform_device *pdev)
-{
- struct sunxi_sid_data *sid_data;
- struct resource *res;
- const struct of_device_id *of_dev_id;
- u8 *entropy;
- unsigned int i;
-
- sid_data = devm_kzalloc(&pdev->dev, sizeof(struct sunxi_sid_data),
- GFP_KERNEL);
- if (!sid_data)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- sid_data->reg_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(sid_data->reg_base))
- return PTR_ERR(sid_data->reg_base);
-
- of_dev_id = of_match_device(sunxi_sid_of_match, &pdev->dev);
- if (!of_dev_id)
- return -ENODEV;
- sid_data->keysize = (int)of_dev_id->data;
-
- platform_set_drvdata(pdev, sid_data);
-
- sid_bin_attr.size = sid_data->keysize;
- if (device_create_bin_file(&pdev->dev, &sid_bin_attr))
- return -ENODEV;
-
- entropy = kzalloc(sizeof(u8) * sid_data->keysize, GFP_KERNEL);
- for (i = 0; i < sid_data->keysize; i++)
- entropy[i] = sunxi_sid_read_byte(sid_data, i);
- add_device_randomness(entropy, sid_data->keysize);
- kfree(entropy);
-
- dev_dbg(&pdev->dev, "loaded\n");
-
- return 0;
-}
-
-static struct platform_driver sunxi_sid_driver = {
- .probe = sunxi_sid_probe,
- .remove = sunxi_sid_remove,
- .driver = {
- .name = DRV_NAME,
- .of_match_table = sunxi_sid_of_match,
- },
-};
-module_platform_driver(sunxi_sid_driver);
-
-MODULE_AUTHOR("Oliver Schinagl <oliver@schinagl.nl>");
-MODULE_DESCRIPTION("Allwinner sunxi security id driver");
-MODULE_LICENSE("GPL");
@@ -22,4 +22,15 @@ config QCOM_QFPROM
This driver can also be built as a module. If so, the module
will be called nvmem-qfprom.
+config NVMEM_SUNXI_SID
+ tristate "Allwinner SoCs SID support"
+ depends on ARCH_SUNXI
+ select REGMAP_MMIO
+ help
+ This is a driver for the 'security ID' available on various Allwinner
+ devices.
+
+ This driver can also be built as a module. If so, the module
+ will be called eeprom-sunxi-sid.
+
endif
@@ -8,3 +8,5 @@ nvmem_core-y := core.o
# Devices
obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o
nvmem_qfprom-y := qfprom.o
+obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem-sunxi-sid.o
+nvmem-sunxi-sid-y := sunxi-sid.o
new file mode 100644
@@ -0,0 +1,160 @@
+/*
+ * Allwinner sunXi SoCs Security ID support.
+ *
+ * Copyright (c) 2013 Oliver Schinagl <oliver@schinagl.nl>
+ * Copyright (C) 2014 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+
+#include <linux/platform_device.h>
+#include <linux/nvmem-provider.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+
+
+static struct nvmem_config econfig = {
+ .name = "sunxi-sid",
+ .read_only = true,
+ .owner = THIS_MODULE,
+};
+
+struct sunxi_sid {
+ void __iomem *base;
+};
+
+/* We read the entire key, due to a 32 bit read alignment requirement. Since we
+ * want to return the requested byte, this results in somewhat slower code and
+ * uses 4 times more reads as needed but keeps code simpler. Since the SID is
+ * only very rarely probed, this is not really an issue.
+ */
+static u8 sunxi_sid_read_byte(const struct sunxi_sid *sid,
+ const unsigned int offset)
+{
+ u32 sid_key;
+
+ sid_key = ioread32be(sid->base + round_down(offset, 4));
+ sid_key >>= (offset % 4) * 8;
+
+ return sid_key; /* Only return the last byte */
+}
+
+static int sunxi_sid_read(void *context,
+ const void *reg, size_t reg_size,
+ void *val, size_t val_size)
+{
+ struct sunxi_sid *sid = context;
+ unsigned int offset = *(u32 *)reg;
+ u8 *buf = val;
+
+ while (val_size) {
+ *buf++ = sunxi_sid_read_byte(sid, offset);
+ val_size--;
+ offset++;
+ }
+
+ return 0;
+}
+
+static int sunxi_sid_write(void *context, const void *data, size_t count)
+{
+ /* Unimplemented */
+ return 0;
+}
+
+static struct regmap_bus sunxi_sid_bus = {
+ .read = sunxi_sid_read,
+ .write = sunxi_sid_write,
+ .reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+ .val_format_endian_default = REGMAP_ENDIAN_NATIVE,
+};
+
+static bool sunxi_sid_writeable_reg(struct device *dev, unsigned int reg)
+{
+ return false;
+}
+
+static struct regmap_config sunxi_sid_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 8,
+ .reg_stride = 1,
+ .writeable_reg = sunxi_sid_writeable_reg,
+};
+
+static int sunxi_sid_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct nvmem_device *nvmem;
+ struct regmap *regmap;
+ struct sunxi_sid *sid;
+
+ sid = devm_kzalloc(dev, sizeof(*sid), GFP_KERNEL);
+ if (!sid)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ sid->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(sid->base))
+ return PTR_ERR(sid->base);
+
+ sunxi_sid_regmap_config.max_register = resource_size(res) - 1;
+
+ regmap = devm_regmap_init(dev, &sunxi_sid_bus, sid,
+ &sunxi_sid_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "regmap init failed\n");
+ return PTR_ERR(regmap);
+ }
+ econfig.dev = dev;
+ nvmem = nvmem_register(&econfig);
+ if (IS_ERR(nvmem))
+ return PTR_ERR(nvmem);
+
+ platform_set_drvdata(pdev, nvmem);
+
+ return 0;
+}
+
+static int sunxi_sid_remove(struct platform_device *pdev)
+{
+ struct nvmem_device *nvmem = platform_get_drvdata(pdev);
+
+ return nvmem_unregister(nvmem);
+}
+
+static const struct of_device_id sunxi_sid_of_match[] = {
+ { .compatible = "allwinner,sun4i-a10-sid" },
+ { .compatible = "allwinner,sun7i-a20-sid" },
+ {/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, sunxi_sid_of_match);
+
+static struct platform_driver sunxi_sid_driver = {
+ .probe = sunxi_sid_probe,
+ .remove = sunxi_sid_remove,
+ .driver = {
+ .name = "eeprom-sunxi-sid",
+ .of_match_table = sunxi_sid_of_match,
+ },
+};
+module_platform_driver(sunxi_sid_driver);
+
+MODULE_AUTHOR("Oliver Schinagl <oliver@schinagl.nl>");
+MODULE_DESCRIPTION("Allwinner sunxi security id driver");
+MODULE_LICENSE("GPL");