diff mbox series

[4/5] arm64: dts: msm8998: Move qfprom iospace to calibrated values

Message ID 20210901183123.1087392-4-angelogioacchino.delregno@somainline.org
State Accepted
Commit 94117eb172281aa57a10292b49d50c1d901f5d0c
Headers show
Series [1/5] arm64: dts: msm8998: Configure the MultiMedia Clock Controller (MMCC) | expand

Commit Message

AngeloGioacchino Del Regno Sept. 1, 2021, 6:31 p.m. UTC
The QFPROM iospace was (erroneously, I believe) set to the uncalibrated
fuse start address, but every driver only needs - and will always only
need - only calibrated values.

Move the iospace forward to the calibrated values start to avoid
offsetting every fuse definition.
Obviously, the only defined fuse (qusb2_hstx_trim) was also fixed to
remove the offset, in order to comply with this change.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 625d0fd7e33d..221dc61ca5e3 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -867,14 +867,14 @@  rpm_msg_ram: memory@778000 {
 			reg = <0x00778000 0x7000>;
 		};
 
-		qfprom: qfprom@780000 {
+		qfprom: qfprom@784000 {
 			compatible = "qcom,qfprom";
-			reg = <0x00780000 0x621c>;
+			reg = <0x00784000 0x621c>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			qusb2_hstx_trim: hstx-trim@423a {
-				reg = <0x423a 0x1>;
+			qusb2_hstx_trim: hstx-trim@23a {
+				reg = <0x23a 0x1>;
 				bits = <0 4>;
 			};
 		};