| Message ID | 1631068099-13559-1-git-send-email-jun.li@nxp.com |
|---|---|
| State | New |
| Headers | show |
| Series | usb: dwc3: core: balance phy init and exit | expand |
On Tue, Sep 7, 2021 at 7:51 PM Li Jun <jun.li@nxp.com> wrote: > > After we start to do core soft reset while usb role switch, > the phy init is invoked at every switch to device mode, but > its counter part de-init is missing, this causes the actual > phy init can not be done when we really want to re-init phy > like system resume, because the counter maintained by phy > core is not 0. considering phy init is actually redundant for > role switch, so move out the phy init from core soft reset to > dwc3 core init where is the only place required. > > Fixes: f88359e1588b ("usb: dwc3: core: Do core softreset when switch mode") > Cc: <stable@vger.kernel.org> > Tested-by: faqiang.zhu <faqiang.zhu@nxp.com> > Signed-off-by: Li Jun <jun.li@nxp.com> Tested-by: John Stultz <john.stultz@linaro.org> #HiKey960 thanks! -john
Hi, Li Jun <jun.li@nxp.com> writes: > After we start to do core soft reset while usb role switch, > the phy init is invoked at every switch to device mode, but > its counter part de-init is missing, this causes the actual > phy init can not be done when we really want to re-init phy > like system resume, because the counter maintained by phy > core is not 0. considering phy init is actually redundant for > role switch, so move out the phy init from core soft reset to > dwc3 core init where is the only place required. > > Fixes: f88359e1588b ("usb: dwc3: core: Do core softreset when switch mode") > Cc: <stable@vger.kernel.org> > Tested-by: faqiang.zhu <faqiang.zhu@nxp.com> > Signed-off-by: Li Jun <jun.li@nxp.com> we need a few more Tested-bys, but patch looks good: Acked-by: Felipe Balbi <balbi@kernel.org> -- balbi
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 4483275afb8a..a02229517d2f 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -264,19 +264,6 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) { u32 reg; int retries = 1000; - int ret; - - usb_phy_init(dwc->usb2_phy); - usb_phy_init(dwc->usb3_phy); - ret = phy_init(dwc->usb2_generic_phy); - if (ret < 0) - return ret; - - ret = phy_init(dwc->usb3_generic_phy); - if (ret < 0) { - phy_exit(dwc->usb2_generic_phy); - return ret; - } /* * We're resetting only the device side because, if we're in host mode, @@ -310,9 +297,6 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) udelay(1); } while (--retries); - phy_exit(dwc->usb3_generic_phy); - phy_exit(dwc->usb2_generic_phy); - return -ETIMEDOUT; done: @@ -1010,9 +994,21 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc->phys_ready = true; } + usb_phy_init(dwc->usb2_phy); + usb_phy_init(dwc->usb3_phy); + ret = phy_init(dwc->usb2_generic_phy); + if (ret < 0) + goto err0a; + + ret = phy_init(dwc->usb3_generic_phy); + if (ret < 0) { + phy_exit(dwc->usb2_generic_phy); + goto err0a; + } + ret = dwc3_core_soft_reset(dwc); if (ret) - goto err0a; + goto err1; if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD && !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) {
After we start to do core soft reset while usb role switch, the phy init is invoked at every switch to device mode, but its counter part de-init is missing, this causes the actual phy init can not be done when we really want to re-init phy like system resume, because the counter maintained by phy core is not 0. considering phy init is actually redundant for role switch, so move out the phy init from core soft reset to dwc3 core init where is the only place required. Fixes: f88359e1588b ("usb: dwc3: core: Do core softreset when switch mode") Cc: <stable@vger.kernel.org> Tested-by: faqiang.zhu <faqiang.zhu@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> --- drivers/usb/dwc3/core.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-)