@@ -487,8 +487,9 @@ static int fsl_xcvr_prepare(struct snd_pcm_substream *substream,
return ret;
}
- /* clear DPATH RESET */
+ /* set DPATH RESET */
m_ctl |= FSL_XCVR_EXT_CTRL_DPTH_RESET(tx);
+ v_ctl |= FSL_XCVR_EXT_CTRL_DPTH_RESET(tx);
ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_EXT_CTRL, m_ctl, v_ctl);
if (ret < 0) {
dev_err(dai->dev, "Error while setting EXT_CTRL: %d\n", ret);
@@ -590,10 +591,6 @@ static void fsl_xcvr_shutdown(struct snd_pcm_substream *substream,
val |= FSL_XCVR_EXT_CTRL_CMDC_RESET(tx);
}
- /* set DPATH RESET */
- mask |= FSL_XCVR_EXT_CTRL_DPTH_RESET(tx);
- val |= FSL_XCVR_EXT_CTRL_DPTH_RESET(tx);
-
ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_EXT_CTRL, mask, val);
if (ret < 0) {
dev_err(dai->dev, "Err setting DPATH RESET: %d\n", ret);
@@ -643,6 +640,16 @@ static int fsl_xcvr_trigger(struct snd_pcm_substream *substream, int cmd,
dev_err(dai->dev, "Failed to enable DMA: %d\n", ret);
return ret;
}
+
+ /* clear DPATH RESET */
+ ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_EXT_CTRL,
+ FSL_XCVR_EXT_CTRL_DPTH_RESET(tx),
+ 0);
+ if (ret < 0) {
+ dev_err(dai->dev, "Failed to clear DPATH RESET: %d\n", ret);
+ return ret;
+ }
+
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
With pause and resume test for ARC, there is occasionally channel swap issue. The reason is that currently driver set the DPATH out of reset first, then start the DMA, the first data got from FIFO may not be the Left channel. Moving DPATH out of reset operation after the dma enablement to fix this issue. Fixes: 28564486866f ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> --- sound/soc/fsl/fsl_xcvr.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-)