diff mbox

[v2,4/7] KVM: arm/arm64: enable irqchip routing

Message ID 1436430137-24205-5-git-send-email-eric.auger@linaro.org
State New
Headers show

Commit Message

Auger Eric July 9, 2015, 8:22 a.m. UTC
This patch adds compilation and link against irqchip.

On ARM, irqchip routing is not really useful since there is
a single irqchip. However main motivation behind using irqchip
code is to enable MSI routing code. With the support of in-kernel
GICv3 ITS emulation, it now seems to be a MUST HAVE requirement.

Functions previously implemented in vgic.c and substitute
to more complex irqchip implementation are removed:

- kvm_send_userspace_msi
- kvm_irq_map_chip_pin
- kvm_set_irq
- kvm_irq_map_gsi.

They implemented a kernel default identity GSI routing. This is now
replaced by user-side provided routing.

Routing standard hooks are now implemented in vgic:
- kvm_set_routing_entry
- kvm_set_irq
- kvm_set_msi

Both HAVE_KVM_IRQCHIP and HAVE_KVM_IRQ_ROUTING are defined.
KVM_CAP_IRQ_ROUTING is advertised and KVM_SET_GSI_ROUTING is allowed.

MSI routing is not yet allowed.

Signed-off-by: Eric Auger <eric.auger@linaro.org>

---
v1 -> v2:
- fix bug reported by Andre related to msi.flags and msi.devid setting
  in kvm_send_userspace_msi
- avoid injecting reserved IRQ numbers in vgic_irqfd_set_irq

RFC -> PATCH
- reword api.txt:
  x move MSI routing comments in a subsequent patch,
  x clearly state GSI routing does not apply to KVM_IRQ_LINE
---
 Documentation/virtual/kvm/api.txt | 12 ++++---
 arch/arm/include/asm/kvm_host.h   |  2 ++
 arch/arm/kvm/Kconfig              |  2 ++
 arch/arm/kvm/Makefile             |  2 +-
 arch/arm64/include/asm/kvm_host.h |  1 +
 arch/arm64/kvm/Kconfig            |  2 ++
 arch/arm64/kvm/Makefile           |  2 +-
 include/kvm/arm_vgic.h            |  9 -----
 virt/kvm/arm/vgic.c               | 71 +++++++++++++++++++++++++--------------
 virt/kvm/irqchip.c                |  2 ++
 10 files changed, 65 insertions(+), 40 deletions(-)

Comments

Auger Eric July 13, 2015, 9:58 a.m. UTC | #1
Hi Andre,
On 07/11/2015 01:15 AM, Andre Przywara wrote:
> Hi Eric,
> 
> On 09/07/15 09:22, Eric Auger wrote:
>> This patch adds compilation and link against irqchip.
>>
>> On ARM, irqchip routing is not really useful since there is
>> a single irqchip. However main motivation behind using irqchip
>> code is to enable MSI routing code. With the support of in-kernel
>> GICv3 ITS emulation, it now seems to be a MUST HAVE requirement.
>>
> 
> ....
> 
>> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
>> index 3630971..6c6c25e 100644
>> --- a/virt/kvm/arm/vgic.c
>> +++ b/virt/kvm/arm/vgic.c
>> @@ -2215,44 +2215,65 @@ out_free_irq:
>>  	return ret;
>>  }
>>  
>> -int kvm_irq_map_gsi(struct kvm *kvm,
>> -		    struct kvm_kernel_irq_routing_entry *entries,
>> -		    int gsi)
>> +int vgic_irqfd_set_irq(struct kvm_kernel_irq_routing_entry *e,
>> +			struct kvm *kvm, int irq_source_id,
>> +			int level, bool line_status)
>>  {
>> -	return 0;
>> -}
>> -
>> -int kvm_irq_map_chip_pin(struct kvm *kvm, unsigned irqchip, unsigned pin)
>> -{
>> -	return pin;
>> -}
>> -
>> -int kvm_set_irq(struct kvm *kvm, int irq_source_id,
>> -		u32 irq, int level, bool line_status)
>> -{
>> -	unsigned int spi = irq + VGIC_NR_PRIVATE_IRQS;
>> +	unsigned int spi_id = e->irqchip.pin + VGIC_NR_PRIVATE_IRQS;
>>  
>> -	trace_kvm_set_irq(irq, level, irq_source_id);
>> +	trace_kvm_set_irq(spi_id, level, irq_source_id);
>>  
>>  	BUG_ON(!vgic_initialized(kvm));
>>  
>> -	return kvm_vgic_inject_irq(kvm, 0, spi, level);
>> +	if (spi_id > min(kvm->arch.vgic.nr_irqs, 1020))
>> +		return -EINVAL;
>> +	return kvm_vgic_inject_irq(kvm, 0, spi_id, level);
>> +}
>> +
>> +/**
>> + * Populates a kvm routing entry from a user routing entry
>> + * @e: kvm internal formatted entry
>> + * @ue: user api formatted entry
>> + * return 0 on success, -EINVAL on errors.
>> + */
>> +int kvm_set_routing_entry(struct kvm_kernel_irq_routing_entry *e,
>> +			  const struct kvm_irq_routing_entry *ue)
>> +{
>> +	int r = -EINVAL;
>> +
>> +	switch (ue->type) {
>> +	case KVM_IRQ_ROUTING_IRQCHIP:
>> +		e->set = vgic_irqfd_set_irq;
>> +		e->irqchip.irqchip = ue->u.irqchip.irqchip;
>> +		e->irqchip.pin = ue->u.irqchip.pin;
>> +		if ((e->irqchip.pin >= KVM_IRQCHIP_NUM_PINS) ||
>> +		    (e->irqchip.irqchip >= KVM_NR_IRQCHIPS))
>> +			goto out;
>> +		break;
>> +	default:
>> +		goto out;
>> +	}
>> +	r = 0;
>> +out:
>> +	return r;
>>  }
>>  
>> -/* MSI not implemented yet */
>>  int kvm_set_msi(struct kvm_kernel_irq_routing_entry *e,
>>  		struct kvm *kvm, int irq_source_id,
>>  		int level, bool line_status)
>>  {
>> -	return 0;
>> -}
>> +	struct kvm_msi msi;
>> +
>> +	msi.address_lo = e->msi.address_lo;
>> +	msi.address_hi = e->msi.address_hi;
>> +	msi.data = e->msi.data;
>> +	if (e->type == KVM_IRQ_ROUTING_EXTENDED_MSI) {
>> +		msi.devid = e->devid;
>> +		msi.flags = KVM_MSI_VALID_DEVID;
>> +	}
> 
> Can't we make the assignment unconditional?
> The GICv2m MSI code does not care about the devid and the ITS code
> requires it.
> This simplifies quite something in the following patches.
> (This refers to the idea of not using the extended type in the kernel).

How are we going to make sure the userspace provided a valid devid then?
- we have this info at user struct level: kvm_irq_routing_msi
- we wouldn't propagate the info at kernel struct level:
kvm_kernel_irq_routing_entry
- the only place where we could check the devid availability against the
need is at kvm_set_routing_entry I think (routing adaptation on ARM).

What is going to happen if devid == 0 since unset?

> 
>>  
>> -#ifdef CONFIG_HAVE_KVM_MSI
>> -int kvm_send_userspace_msi(struct kvm *kvm, struct kvm_msi *msi)
>> -{
>>  	if (kvm->arch.vgic.vm_ops.inject_msi)
>> -		return kvm->arch.vgic.vm_ops.inject_msi(kvm, msi);
>> +		return kvm->arch.vgic.vm_ops.inject_msi(kvm, &msi);
>>  	else
>>  		return -ENODEV;
>>  }
>> -#endif
>> diff --git a/virt/kvm/irqchip.c b/virt/kvm/irqchip.c
>> index e678f8a..f26cadd 100644
>> --- a/virt/kvm/irqchip.c
>> +++ b/virt/kvm/irqchip.c
>> @@ -29,7 +29,9 @@
>>  #include <linux/srcu.h>
>>  #include <linux/export.h>
>>  #include <trace/events/kvm.h>
>> +#if !defined(CONFIG_ARM) && !defined(CONFIG_ARM64)
>>  #include "irq.h"
>> +#endif
> 
> To what irq.h is that referring to? And why is ARM not allowed to
> include that?
this refers to arch/x86/kvm/irq.h, arch/powerpc/kvm/irq.h, ...

This typically declares things we have in include/kvm/arm_vgic.h
like irqchip_in_kernel

So currently I don't see things we should put in that header.

Cheers

Eric




> Cheers,
> Andre.
> 
>>  
>>  struct kvm_irq_routing_table {
>>  	int chip[KVM_NR_IRQCHIPS][KVM_IRQCHIP_NUM_PINS];
>>
diff mbox

Patch

diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 3d920cd..9276dac 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1421,13 +1421,16 @@  KVM_ASSIGN_DEV_IRQ. Partial deassignment of host or guest IRQ is allowed.
 4.52 KVM_SET_GSI_ROUTING
 
 Capability: KVM_CAP_IRQ_ROUTING
-Architectures: x86 s390
+Architectures: x86 s390 arm arm64
 Type: vm ioctl
 Parameters: struct kvm_irq_routing (in)
 Returns: 0 on success, -1 on error
 
 Sets the GSI routing table entries, overwriting any previously set entries.
 
+On arm/arm64, GSI routing has the following limitation:
+- GSI routing does not apply to KVM_IRQ_LINE but only to KVM_IRQFD.
+
 struct kvm_irq_routing {
 	__u32 nr;
 	__u32 flags;
@@ -2335,9 +2338,10 @@  Note that closing the resamplefd is not sufficient to disable the
 irqfd.  The KVM_IRQFD_FLAG_RESAMPLE is only necessary on assignment
 and need not be specified with KVM_IRQFD_FLAG_DEASSIGN.
 
-On ARM/ARM64, the gsi field in the kvm_irqfd struct specifies the Shared
-Peripheral Interrupt (SPI) index, such that the GIC interrupt ID is
-given by gsi + 32.
+On arm/arm64, gsi routing being supported, the following can happen:
+- in case no routing entry is associated to this gsi, injection fails
+- in case the gsi is associated to an irqchip routing entry,
+  irqchip.pin + 32 corresponds to the injected SPI ID.
 
 4.76 KVM_PPC_ALLOCATE_HTAB
 
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
index e896d2c..9871441 100644
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@@ -42,6 +42,8 @@ 
 
 #define KVM_VCPU_MAX_FEATURES 2
 
+#define KVM_IRQCHIP_NUM_PINS 988 /* 1020 -32 is the number of SPI */
+
 #include <kvm/arm_vgic.h>
 
 u32 *kvm_vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num, u32 mode);
diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig
index bfb915d..151e710 100644
--- a/arch/arm/kvm/Kconfig
+++ b/arch/arm/kvm/Kconfig
@@ -31,6 +31,8 @@  config KVM
 	select KVM_VFIO
 	select HAVE_KVM_EVENTFD
 	select HAVE_KVM_IRQFD
+	select HAVE_KVM_IRQCHIP
+	select HAVE_KVM_IRQ_ROUTING
 	depends on ARM_VIRT_EXT && ARM_LPAE && ARM_ARCH_TIMER
 	---help---
 	  Support hosting virtualized guest machines.
diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile
index c5eef02c..1a8f48a 100644
--- a/arch/arm/kvm/Makefile
+++ b/arch/arm/kvm/Makefile
@@ -15,7 +15,7 @@  AFLAGS_init.o := -Wa,-march=armv7-a$(plus_virt)
 AFLAGS_interrupts.o := -Wa,-march=armv7-a$(plus_virt)
 
 KVM := ../../../virt/kvm
-kvm-arm-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/eventfd.o $(KVM)/vfio.o
+kvm-arm-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/eventfd.o $(KVM)/vfio.o $(KVM)/irqchip.o
 
 obj-y += kvm-arm.o init.o interrupts.o
 obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 2709db2..f6201eb 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -44,6 +44,7 @@ 
 #include <kvm/arm_arch_timer.h>
 
 #define KVM_VCPU_MAX_FEATURES 3
+#define KVM_IRQCHIP_NUM_PINS 988 /* 1020 -32 is the number of SPI */
 
 int __attribute_const__ kvm_target_cpu(void);
 int kvm_reset_vcpu(struct kvm_vcpu *vcpu);
diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig
index ff9722f..1a9900d 100644
--- a/arch/arm64/kvm/Kconfig
+++ b/arch/arm64/kvm/Kconfig
@@ -32,6 +32,8 @@  config KVM
 	select HAVE_KVM_EVENTFD
 	select HAVE_KVM_IRQFD
 	select HAVE_KVM_MSI
+	select HAVE_KVM_IRQCHIP
+	select HAVE_KVM_IRQ_ROUTING
 	---help---
 	  Support hosting virtualized guest machines.
 
diff --git a/arch/arm64/kvm/Makefile b/arch/arm64/kvm/Makefile
index 9803307..90a08457 100644
--- a/arch/arm64/kvm/Makefile
+++ b/arch/arm64/kvm/Makefile
@@ -11,7 +11,7 @@  ARM=../../../arch/arm/kvm
 
 obj-$(CONFIG_KVM_ARM_HOST) += kvm.o
 
-kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/eventfd.o $(KVM)/vfio.o
+kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/eventfd.o $(KVM)/vfio.o $(KVM)/irqchip.o
 kvm-$(CONFIG_KVM_ARM_HOST) += $(ARM)/arm.o $(ARM)/mmu.o $(ARM)/mmio.o
 kvm-$(CONFIG_KVM_ARM_HOST) += $(ARM)/psci.o $(ARM)/perf.o
 
diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
index 8f1be6a..10dc596 100644
--- a/include/kvm/arm_vgic.h
+++ b/include/kvm/arm_vgic.h
@@ -366,13 +366,4 @@  static inline int vgic_v3_probe(struct device_node *vgic_node,
 }
 #endif
 
-#ifdef CONFIG_HAVE_KVM_MSI
-int kvm_send_userspace_msi(struct kvm *kvm, struct kvm_msi *msi);
-#else
-static inline int kvm_send_userspace_msi(struct kvm *kvm, struct kvm_msi *msi)
-{
-	return -ENODEV;
-}
-#endif
-
 #endif
diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
index 3630971..6c6c25e 100644
--- a/virt/kvm/arm/vgic.c
+++ b/virt/kvm/arm/vgic.c
@@ -2215,44 +2215,65 @@  out_free_irq:
 	return ret;
 }
 
-int kvm_irq_map_gsi(struct kvm *kvm,
-		    struct kvm_kernel_irq_routing_entry *entries,
-		    int gsi)
+int vgic_irqfd_set_irq(struct kvm_kernel_irq_routing_entry *e,
+			struct kvm *kvm, int irq_source_id,
+			int level, bool line_status)
 {
-	return 0;
-}
-
-int kvm_irq_map_chip_pin(struct kvm *kvm, unsigned irqchip, unsigned pin)
-{
-	return pin;
-}
-
-int kvm_set_irq(struct kvm *kvm, int irq_source_id,
-		u32 irq, int level, bool line_status)
-{
-	unsigned int spi = irq + VGIC_NR_PRIVATE_IRQS;
+	unsigned int spi_id = e->irqchip.pin + VGIC_NR_PRIVATE_IRQS;
 
-	trace_kvm_set_irq(irq, level, irq_source_id);
+	trace_kvm_set_irq(spi_id, level, irq_source_id);
 
 	BUG_ON(!vgic_initialized(kvm));
 
-	return kvm_vgic_inject_irq(kvm, 0, spi, level);
+	if (spi_id > min(kvm->arch.vgic.nr_irqs, 1020))
+		return -EINVAL;
+	return kvm_vgic_inject_irq(kvm, 0, spi_id, level);
+}
+
+/**
+ * Populates a kvm routing entry from a user routing entry
+ * @e: kvm internal formatted entry
+ * @ue: user api formatted entry
+ * return 0 on success, -EINVAL on errors.
+ */
+int kvm_set_routing_entry(struct kvm_kernel_irq_routing_entry *e,
+			  const struct kvm_irq_routing_entry *ue)
+{
+	int r = -EINVAL;
+
+	switch (ue->type) {
+	case KVM_IRQ_ROUTING_IRQCHIP:
+		e->set = vgic_irqfd_set_irq;
+		e->irqchip.irqchip = ue->u.irqchip.irqchip;
+		e->irqchip.pin = ue->u.irqchip.pin;
+		if ((e->irqchip.pin >= KVM_IRQCHIP_NUM_PINS) ||
+		    (e->irqchip.irqchip >= KVM_NR_IRQCHIPS))
+			goto out;
+		break;
+	default:
+		goto out;
+	}
+	r = 0;
+out:
+	return r;
 }
 
-/* MSI not implemented yet */
 int kvm_set_msi(struct kvm_kernel_irq_routing_entry *e,
 		struct kvm *kvm, int irq_source_id,
 		int level, bool line_status)
 {
-	return 0;
-}
+	struct kvm_msi msi;
+
+	msi.address_lo = e->msi.address_lo;
+	msi.address_hi = e->msi.address_hi;
+	msi.data = e->msi.data;
+	if (e->type == KVM_IRQ_ROUTING_EXTENDED_MSI) {
+		msi.devid = e->devid;
+		msi.flags = KVM_MSI_VALID_DEVID;
+	}
 
-#ifdef CONFIG_HAVE_KVM_MSI
-int kvm_send_userspace_msi(struct kvm *kvm, struct kvm_msi *msi)
-{
 	if (kvm->arch.vgic.vm_ops.inject_msi)
-		return kvm->arch.vgic.vm_ops.inject_msi(kvm, msi);
+		return kvm->arch.vgic.vm_ops.inject_msi(kvm, &msi);
 	else
 		return -ENODEV;
 }
-#endif
diff --git a/virt/kvm/irqchip.c b/virt/kvm/irqchip.c
index e678f8a..f26cadd 100644
--- a/virt/kvm/irqchip.c
+++ b/virt/kvm/irqchip.c
@@ -29,7 +29,9 @@ 
 #include <linux/srcu.h>
 #include <linux/export.h>
 #include <trace/events/kvm.h>
+#if !defined(CONFIG_ARM) && !defined(CONFIG_ARM64)
 #include "irq.h"
+#endif
 
 struct kvm_irq_routing_table {
 	int chip[KVM_NR_IRQCHIPS][KVM_IRQCHIP_NUM_PINS];