diff mbox series

[3/3] ath11k: support SMPS configuration for 6 GHz

Message ID 20210913175510.193005-3-jouni@codeaurora.org
State New
Headers show
Series [1/3] ieee80211: Add new A-MPDU factor macro for HE 6 GHz peer caps | expand

Commit Message

Jouni Malinen Sept. 13, 2021, 5:55 p.m. UTC 
From: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>

Parse SMPS configuration from IEs and configure. Without this,
SMPS is not enabled for 6 GHz band.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01386-QCAHKSWPL_SILICONZ-1

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/mac.c | 31 ++++++++++++++++++---------
 1 file changed, 21 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index aba005241095..155ca6af1b45 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -2012,11 +2012,16 @@  static void ath11k_peer_assoc_h_smps(struct ieee80211_sta *sta,
 	const struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
 	int smps;
 
-	if (!ht_cap->ht_supported)
+	if (!ht_cap->ht_supported && !sta->he_6ghz_capa.capa)
 		return;
 
-	smps = ht_cap->cap & IEEE80211_HT_CAP_SM_PS;
-	smps >>= IEEE80211_HT_CAP_SM_PS_SHIFT;
+	if (ht_cap->ht_supported) {
+		smps = ht_cap->cap & IEEE80211_HT_CAP_SM_PS;
+		smps >>= IEEE80211_HT_CAP_SM_PS_SHIFT;
+	} else {
+		smps = FIELD_GET(IEEE80211_HE_6GHZ_CAP_SM_PS,
+				 le16_to_cpu(sta->he_6ghz_capa.capa));
+	}
 
 	switch (smps) {
 	case WLAN_HT_CAP_SM_PS_STATIC:
@@ -2304,15 +2309,20 @@  static void ath11k_peer_assoc_prepare(struct ath11k *ar,
 
 static int ath11k_setup_peer_smps(struct ath11k *ar, struct ath11k_vif *arvif,
 				  const u8 *addr,
-				  const struct ieee80211_sta_ht_cap *ht_cap)
+				  const struct ieee80211_sta_ht_cap *ht_cap,
+				  u16 he_6ghz_capa)
 {
 	int smps;
 
-	if (!ht_cap->ht_supported)
+	if (!ht_cap->ht_supported && !he_6ghz_capa)
 		return 0;
 
-	smps = ht_cap->cap & IEEE80211_HT_CAP_SM_PS;
-	smps >>= IEEE80211_HT_CAP_SM_PS_SHIFT;
+	if (ht_cap->ht_supported) {
+		smps = ht_cap->cap & IEEE80211_HT_CAP_SM_PS;
+		smps >>= IEEE80211_HT_CAP_SM_PS_SHIFT;
+	} else {
+		smps = FIELD_GET(IEEE80211_HE_6GHZ_CAP_SM_PS, he_6ghz_capa);
+	}
 
 	if (smps >= ARRAY_SIZE(ath11k_smps_map))
 		return -EINVAL;
@@ -2366,7 +2376,8 @@  static void ath11k_bss_assoc(struct ieee80211_hw *hw,
 	}
 
 	ret = ath11k_setup_peer_smps(ar, arvif, bss_conf->bssid,
-				     &ap_sta->ht_cap);
+				     &ap_sta->ht_cap,
+				     le16_to_cpu(ap_sta->he_6ghz_capa.capa));
 	if (ret) {
 		ath11k_warn(ar->ab, "failed to setup peer SMPS for vdev %d: %d\n",
 			    arvif->vdev_id, ret);
@@ -3656,7 +3667,7 @@  static int ath11k_station_assoc(struct ath11k *ar,
 		return 0;
 
 	ret = ath11k_setup_peer_smps(ar, arvif, sta->addr,
-				     &sta->ht_cap);
+				     &sta->ht_cap, le16_to_cpu(sta->he_6ghz_capa.capa));
 	if (ret) {
 		ath11k_warn(ar->ab, "failed to setup peer SMPS for vdev %d: %d\n",
 			    arvif->vdev_id, ret);
@@ -7559,7 +7570,7 @@  static int __ath11k_mac_register(struct ath11k *ar)
 	 * for each band for a dual band capable radio. It will be tricky to
 	 * handle it when the ht capability different for each band.
 	 */
-	if (ht_cap & WMI_HT_CAP_DYNAMIC_SMPS)
+	if (ht_cap & WMI_HT_CAP_DYNAMIC_SMPS || ar->supports_6ghz)
 		ar->hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS;
 
 	ar->hw->wiphy->max_scan_ssids = WLAN_SCAN_PARAMS_MAX_SSID;