diff mbox series

[6/6] clk: samsung: Introduce Exynos850 clock driver

Message ID 20210914155607.14122-7-semen.protsenko@linaro.org
State New
Headers show
Series clk: samsung: Introduce Exynos850 SoC clock driver | expand

Commit Message

Sam Protsenko Sept. 14, 2021, 3:56 p.m. UTC
This is the initial implementation adding only basic clocks like UART,
MMC, I2C and corresponding parent clocks. Design is influenced by
Exynos7 and Exynos5433 clock drivers.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>

---
 drivers/clk/samsung/Makefile        |   1 +
 drivers/clk/samsung/clk-exynos850.c | 700 ++++++++++++++++++++++++++++
 2 files changed, 701 insertions(+)
 create mode 100644 drivers/clk/samsung/clk-exynos850.c

-- 
2.30.2

Comments

Krzysztof Kozlowski Sept. 15, 2021, 8:59 a.m. UTC | #1
On 14/09/2021 17:56, Sam Protsenko wrote:
> This is the initial implementation adding only basic clocks like UART,

> MMC, I2C and corresponding parent clocks. Design is influenced by

> Exynos7 and Exynos5433 clock drivers.

> 

> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>

> ---

>  drivers/clk/samsung/Makefile        |   1 +

>  drivers/clk/samsung/clk-exynos850.c | 700 ++++++++++++++++++++++++++++

>  2 files changed, 701 insertions(+)

>  create mode 100644 drivers/clk/samsung/clk-exynos850.c

> 

> diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile

> index 028b2e27a37e..c46cf11e4d0b 100644

> --- a/drivers/clk/samsung/Makefile

> +++ b/drivers/clk/samsung/Makefile

> @@ -17,6 +17,7 @@ obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)	+= clk-exynos5433.o

>  obj-$(CONFIG_EXYNOS_AUDSS_CLK_CON) += clk-exynos-audss.o

>  obj-$(CONFIG_EXYNOS_CLKOUT)	+= clk-exynos-clkout.o

>  obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)	+= clk-exynos7.o

> +obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)	+= clk-exynos850.o

>  obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o

>  obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o

>  obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o

> diff --git a/drivers/clk/samsung/clk-exynos850.c b/drivers/clk/samsung/clk-exynos850.c

> new file mode 100644

> index 000000000000..1028caa2102e

> --- /dev/null

> +++ b/drivers/clk/samsung/clk-exynos850.c

> @@ -0,0 +1,700 @@

> +// SPDX-License-Identifier: GPL-2.0-only

> +/*

> + * Copyright (C) 2021 Linaro Ltd.

> + * Author: Sam Protsenko <semen.protsenko@linaro.org>

> + *

> + * Common Clock Framework support for Exynos850 SoC.

> + */

> +

> +#include <linux/clk-provider.h>

> +#include <linux/of.h>

> +#include <linux/of_address.h>

> +

> +#include <dt-bindings/clock/exynos850.h>

> +

> +#include "clk.h"

> +

> +/* Gate register bits */

> +#define GATE_MANUAL		BIT(20)

> +#define GATE_ENABLE_HWACG	BIT(28)

> +

> +/* Gate register offsets range */

> +#define GATE_OFF_START		0x2000

> +#define GATE_OFF_END		0x2fff

> +

> +/**

> + * exynos850_init_clocks - Set clocks initial configuration

> + * @np:			CMU device tree node with "reg" property (CMU addr)

> + * @reg_offs:		Register offsets array for clocks to init

> + * @reg_offs_len:	Number of register offsets in reg_offs array

> + *

> + * Set manual control mode for all gate clocks.

> + */

> +static void __init exynos850_init_clocks(struct device_node *np,

> +		const unsigned long *reg_offs, size_t reg_offs_len)

> +{

> +	const __be32 *regaddr_p;

> +	u64 regaddr;

> +	u32 base;

> +	size_t i;

> +

> +	/* Get the base address ("reg" property in dts) */

> +	regaddr_p = of_get_address(np, 0, NULL, NULL);

> +	if (!regaddr_p)

> +		panic("%s: failed to get reg regaddr\n", __func__);

> +

> +	regaddr = of_translate_address(np, regaddr_p);

> +	if (regaddr == OF_BAD_ADDR || !regaddr)

> +		panic("%s: bad reg regaddr\n", __func__);

> +

> +	base = (u32)regaddr;

> +

> +	for (i = 0; i < reg_offs_len; ++i) {

> +		void __iomem *reg;

> +		u32 val;

> +

> +		/* Modify only gate clock registers */

> +		if (reg_offs[i] < GATE_OFF_START || reg_offs[i] > GATE_OFF_END)

> +			continue;

> +

> +		reg = ioremap(base + reg_offs[i], 4);


You first translate the address to CPU physical address and then apply
offset. This should be equivalent to one of_iomap() of entire range and
iterate starting from the base pointer.  IOW, I don't get why you have
to map each register instead of mapping entire SFR/IO range?

> +		val = ioread32(reg);

> +		val |= GATE_MANUAL;

> +		val &= ~GATE_ENABLE_HWACG;

> +		iowrite32(val, reg);


All other drivers use readl/writel, so how about keeping it consistent?

Rest looks good but I did not verify the numbers :)

Best regards,
Krzysztof
On 14.09.2021 17:56, Sam Protsenko wrote:
> +static void __init exynos850_cmu_top_init(struct device_node *np)
> +{
> +	exynos850_init_clocks(np, top_clk_regs, ARRAY_SIZE(top_clk_regs));
> +	samsung_cmu_register_one(np, &top_cmu_info);
> +}
> +
> +CLK_OF_DECLARE(exynos850_cmu_top, "samsung,exynos850-cmu-top",
> +	       exynos850_cmu_top_init);

Was there anything preventing you from making it a platform driver instead?
Chanwoo Choi Sept. 15, 2021, 6:04 p.m. UTC | #3
Hi Sam,

On 21. 9. 15. 오전 12:56, Sam Protsenko wrote:
> This is the initial implementation adding only basic clocks like UART,
> MMC, I2C and corresponding parent clocks. Design is influenced by
> Exynos7 and Exynos5433 clock drivers.
> 
> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
> ---
>   drivers/clk/samsung/Makefile        |   1 +
>   drivers/clk/samsung/clk-exynos850.c | 700 ++++++++++++++++++++++++++++
>   2 files changed, 701 insertions(+)
>   create mode 100644 drivers/clk/samsung/clk-exynos850.c
> 
> diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
> index 028b2e27a37e..c46cf11e4d0b 100644
> --- a/drivers/clk/samsung/Makefile
> +++ b/drivers/clk/samsung/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)	+= clk-exynos5433.o
>   obj-$(CONFIG_EXYNOS_AUDSS_CLK_CON) += clk-exynos-audss.o
>   obj-$(CONFIG_EXYNOS_CLKOUT)	+= clk-exynos-clkout.o
>   obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)	+= clk-exynos7.o
> +obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)	+= clk-exynos850.o
>   obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o
>   obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o
>   obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
> diff --git a/drivers/clk/samsung/clk-exynos850.c b/drivers/clk/samsung/clk-exynos850.c
> new file mode 100644
> index 000000000000..1028caa2102e
> --- /dev/null
> +++ b/drivers/clk/samsung/clk-exynos850.c
> @@ -0,0 +1,700 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2021 Linaro Ltd.
> + * Author: Sam Protsenko <semen.protsenko@linaro.org>
> + *
> + * Common Clock Framework support for Exynos850 SoC.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +
> +#include <dt-bindings/clock/exynos850.h>
> +
> +#include "clk.h"
> +
> +/* Gate register bits */
> +#define GATE_MANUAL		BIT(20)
> +#define GATE_ENABLE_HWACG	BIT(28)
> +
> +/* Gate register offsets range */
> +#define GATE_OFF_START		0x2000
> +#define GATE_OFF_END		0x2fff
> +
> +/**
> + * exynos850_init_clocks - Set clocks initial configuration
> + * @np:			CMU device tree node with "reg" property (CMU addr)
> + * @reg_offs:		Register offsets array for clocks to init
> + * @reg_offs_len:	Number of register offsets in reg_offs array
> + *
> + * Set manual control mode for all gate clocks.
> + */
> +static void __init exynos850_init_clocks(struct device_node *np,
> +		const unsigned long *reg_offs, size_t reg_offs_len)
> +{
> +	const __be32 *regaddr_p;
> +	u64 regaddr;
> +	u32 base;
> +	size_t i;
> +
> +	/* Get the base address ("reg" property in dts) */
> +	regaddr_p = of_get_address(np, 0, NULL, NULL);
> +	if (!regaddr_p)
> +		panic("%s: failed to get reg regaddr\n", __func__);
> +
> +	regaddr = of_translate_address(np, regaddr_p);
> +	if (regaddr == OF_BAD_ADDR || !regaddr)
> +		panic("%s: bad reg regaddr\n", __func__);
> +
> +	base = (u32)regaddr;
> +
> +	for (i = 0; i < reg_offs_len; ++i) {
> +		void __iomem *reg;
> +		u32 val;
> +
> +		/* Modify only gate clock registers */
> +		if (reg_offs[i] < GATE_OFF_START || reg_offs[i] > GATE_OFF_END)
> +			continue; > +
> +		reg = ioremap(base + reg_offs[i], 4);
> +		val = ioread32(reg);
> +		val |= GATE_MANUAL;
> +		val &= ~GATE_ENABLE_HWACG;
> +		iowrite32(val, reg);
> +		iounmap(reg);

I understand your intention for disabling HWACG.
But, it is not good to execute ioreamp/iounmap for each clock gate
register. I think that we need to consider the more pretty method
to initialize the clock register before clock registration.

[snip]
Sam Protsenko Sept. 15, 2021, 10 p.m. UTC | #4
On Wed, 15 Sept 2021 at 21:05, Chanwoo Choi <cwchoi00@gmail.com> wrote:
>

> Hi Sam,

>

> On 21. 9. 15. 오전 12:56, Sam Protsenko wrote:

> > This is the initial implementation adding only basic clocks like UART,

> > MMC, I2C and corresponding parent clocks. Design is influenced by

> > Exynos7 and Exynos5433 clock drivers.

> >

> > Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>

> > ---

> >   drivers/clk/samsung/Makefile        |   1 +

> >   drivers/clk/samsung/clk-exynos850.c | 700 ++++++++++++++++++++++++++++

> >   2 files changed, 701 insertions(+)

> >   create mode 100644 drivers/clk/samsung/clk-exynos850.c

> >

> > diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile

> > index 028b2e27a37e..c46cf11e4d0b 100644

> > --- a/drivers/clk/samsung/Makefile

> > +++ b/drivers/clk/samsung/Makefile

> > @@ -17,6 +17,7 @@ obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)       += clk-exynos5433.o

> >   obj-$(CONFIG_EXYNOS_AUDSS_CLK_CON) += clk-exynos-audss.o

> >   obj-$(CONFIG_EXYNOS_CLKOUT) += clk-exynos-clkout.o

> >   obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)       += clk-exynos7.o

> > +obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)        += clk-exynos850.o

> >   obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o

> >   obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o

> >   obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o

> > diff --git a/drivers/clk/samsung/clk-exynos850.c b/drivers/clk/samsung/clk-exynos850.c

> > new file mode 100644

> > index 000000000000..1028caa2102e

> > --- /dev/null

> > +++ b/drivers/clk/samsung/clk-exynos850.c

> > @@ -0,0 +1,700 @@

> > +// SPDX-License-Identifier: GPL-2.0-only

> > +/*

> > + * Copyright (C) 2021 Linaro Ltd.

> > + * Author: Sam Protsenko <semen.protsenko@linaro.org>

> > + *

> > + * Common Clock Framework support for Exynos850 SoC.

> > + */

> > +

> > +#include <linux/clk-provider.h>

> > +#include <linux/of.h>

> > +#include <linux/of_address.h>

> > +

> > +#include <dt-bindings/clock/exynos850.h>

> > +

> > +#include "clk.h"

> > +

> > +/* Gate register bits */

> > +#define GATE_MANUAL          BIT(20)

> > +#define GATE_ENABLE_HWACG    BIT(28)

> > +

> > +/* Gate register offsets range */

> > +#define GATE_OFF_START               0x2000

> > +#define GATE_OFF_END         0x2fff

> > +

> > +/**

> > + * exynos850_init_clocks - Set clocks initial configuration

> > + * @np:                      CMU device tree node with "reg" property (CMU addr)

> > + * @reg_offs:                Register offsets array for clocks to init

> > + * @reg_offs_len:    Number of register offsets in reg_offs array

> > + *

> > + * Set manual control mode for all gate clocks.

> > + */

> > +static void __init exynos850_init_clocks(struct device_node *np,

> > +             const unsigned long *reg_offs, size_t reg_offs_len)

> > +{

> > +     const __be32 *regaddr_p;

> > +     u64 regaddr;

> > +     u32 base;

> > +     size_t i;

> > +

> > +     /* Get the base address ("reg" property in dts) */

> > +     regaddr_p = of_get_address(np, 0, NULL, NULL);

> > +     if (!regaddr_p)

> > +             panic("%s: failed to get reg regaddr\n", __func__);

> > +

> > +     regaddr = of_translate_address(np, regaddr_p);

> > +     if (regaddr == OF_BAD_ADDR || !regaddr)

> > +             panic("%s: bad reg regaddr\n", __func__);

> > +

> > +     base = (u32)regaddr;

> > +

> > +     for (i = 0; i < reg_offs_len; ++i) {

> > +             void __iomem *reg;

> > +             u32 val;

> > +

> > +             /* Modify only gate clock registers */

> > +             if (reg_offs[i] < GATE_OFF_START || reg_offs[i] > GATE_OFF_END)

> > +                     continue; > +

> > +             reg = ioremap(base + reg_offs[i], 4);

> > +             val = ioread32(reg);

> > +             val |= GATE_MANUAL;

> > +             val &= ~GATE_ENABLE_HWACG;

> > +             iowrite32(val, reg);

> > +             iounmap(reg);

>

> I understand your intention for disabling HWACG.

> But, it is not good to execute ioreamp/iounmap for each clock gate

> register. I think that we need to consider the more pretty method

> to initialize the clock register before clock registration.

>

> [snip]

>


Hi guys,

Thanks for the quick review! I'll address all your comments once I get
back from vacation (in two weeks), and will send v2.

> --

> Best Regards,

> Samsung Electronics

> Chanwoo Choi
diff mbox series

Patch

diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 028b2e27a37e..c46cf11e4d0b 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -17,6 +17,7 @@  obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)	+= clk-exynos5433.o
 obj-$(CONFIG_EXYNOS_AUDSS_CLK_CON) += clk-exynos-audss.o
 obj-$(CONFIG_EXYNOS_CLKOUT)	+= clk-exynos-clkout.o
 obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)	+= clk-exynos7.o
+obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)	+= clk-exynos850.o
 obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o
 obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o
 obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
diff --git a/drivers/clk/samsung/clk-exynos850.c b/drivers/clk/samsung/clk-exynos850.c
new file mode 100644
index 000000000000..1028caa2102e
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos850.c
@@ -0,0 +1,700 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Linaro Ltd.
+ * Author: Sam Protsenko <semen.protsenko@linaro.org>
+ *
+ * Common Clock Framework support for Exynos850 SoC.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/exynos850.h>
+
+#include "clk.h"
+
+/* Gate register bits */
+#define GATE_MANUAL		BIT(20)
+#define GATE_ENABLE_HWACG	BIT(28)
+
+/* Gate register offsets range */
+#define GATE_OFF_START		0x2000
+#define GATE_OFF_END		0x2fff
+
+/**
+ * exynos850_init_clocks - Set clocks initial configuration
+ * @np:			CMU device tree node with "reg" property (CMU addr)
+ * @reg_offs:		Register offsets array for clocks to init
+ * @reg_offs_len:	Number of register offsets in reg_offs array
+ *
+ * Set manual control mode for all gate clocks.
+ */
+static void __init exynos850_init_clocks(struct device_node *np,
+		const unsigned long *reg_offs, size_t reg_offs_len)
+{
+	const __be32 *regaddr_p;
+	u64 regaddr;
+	u32 base;
+	size_t i;
+
+	/* Get the base address ("reg" property in dts) */
+	regaddr_p = of_get_address(np, 0, NULL, NULL);
+	if (!regaddr_p)
+		panic("%s: failed to get reg regaddr\n", __func__);
+
+	regaddr = of_translate_address(np, regaddr_p);
+	if (regaddr == OF_BAD_ADDR || !regaddr)
+		panic("%s: bad reg regaddr\n", __func__);
+
+	base = (u32)regaddr;
+
+	for (i = 0; i < reg_offs_len; ++i) {
+		void __iomem *reg;
+		u32 val;
+
+		/* Modify only gate clock registers */
+		if (reg_offs[i] < GATE_OFF_START || reg_offs[i] > GATE_OFF_END)
+			continue;
+
+		reg = ioremap(base + reg_offs[i], 4);
+		val = ioread32(reg);
+		val |= GATE_MANUAL;
+		val &= ~GATE_ENABLE_HWACG;
+		iowrite32(val, reg);
+		iounmap(reg);
+	}
+}
+
+/* Register Offset definitions for CMU_TOP (0x120e0000) */
+#define PLL_LOCKTIME_PLL_MMC			0x0000
+#define PLL_LOCKTIME_PLL_SHARED0		0x0004
+#define PLL_LOCKTIME_PLL_SHARED1		0x0008
+#define PLL_CON0_PLL_MMC			0x0100
+#define PLL_CON3_PLL_MMC			0x010c
+#define PLL_CON0_PLL_SHARED0			0x0140
+#define PLL_CON3_PLL_SHARED0			0x014c
+#define PLL_CON0_PLL_SHARED1			0x0180
+#define PLL_CON3_PLL_SHARED1			0x018c
+#define CLK_CON_MUX_MUX_CLKCMU_CORE_BUS		0x1014
+#define CLK_CON_MUX_MUX_CLKCMU_CORE_CCI		0x1018
+#define CLK_CON_MUX_MUX_CLKCMU_CORE_MMC_EMBD	0x101c
+#define CLK_CON_MUX_MUX_CLKCMU_CORE_SSS		0x1020
+#define CLK_CON_MUX_MUX_CLKCMU_HSI_BUS		0x103c
+#define CLK_CON_MUX_MUX_CLKCMU_HSI_MMC_CARD	0x1040
+#define CLK_CON_MUX_MUX_CLKCMU_HSI_USB20DRD	0x1044
+#define CLK_CON_MUX_MUX_CLKCMU_PERI_BUS		0x1070
+#define CLK_CON_MUX_MUX_CLKCMU_PERI_IP		0x1074
+#define CLK_CON_MUX_MUX_CLKCMU_PERI_UART	0x1078
+#define CLK_CON_DIV_CLKCMU_CORE_BUS		0x1820
+#define CLK_CON_DIV_CLKCMU_CORE_CCI		0x1824
+#define CLK_CON_DIV_CLKCMU_CORE_MMC_EMBD	0x1828
+#define CLK_CON_DIV_CLKCMU_CORE_SSS		0x182c
+#define CLK_CON_DIV_CLKCMU_HSI_BUS		0x1848
+#define CLK_CON_DIV_CLKCMU_HSI_MMC_CARD		0x184c
+#define CLK_CON_DIV_CLKCMU_HSI_USB20DRD		0x1850
+#define CLK_CON_DIV_CLKCMU_PERI_BUS		0x187c
+#define CLK_CON_DIV_CLKCMU_PERI_IP		0x1880
+#define CLK_CON_DIV_CLKCMU_PERI_UART		0x1884
+#define CLK_CON_DIV_PLL_SHARED0_DIV2		0x188c
+#define CLK_CON_DIV_PLL_SHARED0_DIV3		0x1890
+#define CLK_CON_DIV_PLL_SHARED0_DIV4		0x1894
+#define CLK_CON_DIV_PLL_SHARED1_DIV2		0x1898
+#define CLK_CON_DIV_PLL_SHARED1_DIV3		0x189c
+#define CLK_CON_DIV_PLL_SHARED1_DIV4		0x18a0
+#define CLK_CON_GAT_GATE_CLKCMU_CORE_BUS	0x201c
+#define CLK_CON_GAT_GATE_CLKCMU_CORE_CCI	0x2020
+#define CLK_CON_GAT_GATE_CLKCMU_CORE_MMC_EMBD	0x2024
+#define CLK_CON_GAT_GATE_CLKCMU_CORE_SSS	0x2028
+#define CLK_CON_GAT_GATE_CLKCMU_HSI_BUS		0x2044
+#define CLK_CON_GAT_GATE_CLKCMU_HSI_MMC_CARD	0x2048
+#define CLK_CON_GAT_GATE_CLKCMU_HSI_USB20DRD	0x204c
+#define CLK_CON_GAT_GATE_CLKCMU_PERI_BUS	0x2080
+#define CLK_CON_GAT_GATE_CLKCMU_PERI_IP		0x2084
+#define CLK_CON_GAT_GATE_CLKCMU_PERI_UART	0x2088
+
+static const unsigned long top_clk_regs[] __initconst = {
+	PLL_LOCKTIME_PLL_MMC,
+	PLL_LOCKTIME_PLL_SHARED0,
+	PLL_LOCKTIME_PLL_SHARED1,
+	PLL_CON0_PLL_MMC,
+	PLL_CON3_PLL_MMC,
+	PLL_CON0_PLL_SHARED0,
+	PLL_CON3_PLL_SHARED0,
+	PLL_CON0_PLL_SHARED1,
+	PLL_CON3_PLL_SHARED1,
+	CLK_CON_MUX_MUX_CLKCMU_CORE_BUS,
+	CLK_CON_MUX_MUX_CLKCMU_CORE_CCI,
+	CLK_CON_MUX_MUX_CLKCMU_CORE_MMC_EMBD,
+	CLK_CON_MUX_MUX_CLKCMU_CORE_SSS,
+	CLK_CON_MUX_MUX_CLKCMU_HSI_BUS,
+	CLK_CON_MUX_MUX_CLKCMU_HSI_MMC_CARD,
+	CLK_CON_MUX_MUX_CLKCMU_HSI_USB20DRD,
+	CLK_CON_MUX_MUX_CLKCMU_PERI_BUS,
+	CLK_CON_MUX_MUX_CLKCMU_PERI_IP,
+	CLK_CON_MUX_MUX_CLKCMU_PERI_UART,
+	CLK_CON_DIV_CLKCMU_CORE_BUS,
+	CLK_CON_DIV_CLKCMU_CORE_CCI,
+	CLK_CON_DIV_CLKCMU_CORE_MMC_EMBD,
+	CLK_CON_DIV_CLKCMU_CORE_SSS,
+	CLK_CON_DIV_CLKCMU_HSI_BUS,
+	CLK_CON_DIV_CLKCMU_HSI_MMC_CARD,
+	CLK_CON_DIV_CLKCMU_HSI_USB20DRD,
+	CLK_CON_DIV_CLKCMU_PERI_BUS,
+	CLK_CON_DIV_CLKCMU_PERI_IP,
+	CLK_CON_DIV_CLKCMU_PERI_UART,
+	CLK_CON_DIV_PLL_SHARED0_DIV2,
+	CLK_CON_DIV_PLL_SHARED0_DIV3,
+	CLK_CON_DIV_PLL_SHARED0_DIV4,
+	CLK_CON_DIV_PLL_SHARED1_DIV2,
+	CLK_CON_DIV_PLL_SHARED1_DIV3,
+	CLK_CON_DIV_PLL_SHARED1_DIV4,
+	CLK_CON_GAT_GATE_CLKCMU_CORE_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_CORE_CCI,
+	CLK_CON_GAT_GATE_CLKCMU_CORE_MMC_EMBD,
+	CLK_CON_GAT_GATE_CLKCMU_CORE_SSS,
+	CLK_CON_GAT_GATE_CLKCMU_HSI_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_HSI_MMC_CARD,
+	CLK_CON_GAT_GATE_CLKCMU_HSI_USB20DRD,
+	CLK_CON_GAT_GATE_CLKCMU_PERI_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_PERI_IP,
+	CLK_CON_GAT_GATE_CLKCMU_PERI_UART,
+};
+
+/*
+ * Do not provide PLL tables to core PLLs, as MANUAL_PLL_CTRL bit is not set
+ * for those PLLs by default, so set_rate operation would fail.
+ */
+static const struct samsung_pll_clock top_pll_clks[] __initconst = {
+	/* CMU_TOP_PURECLKCOMP */
+	PLL(pll_0822x, 0, "fout_shared0_pll", "oscclk",
+	    PLL_LOCKTIME_PLL_SHARED0, PLL_CON3_PLL_SHARED0,
+	    NULL),
+	PLL(pll_0822x, 0, "fout_shared1_pll", "oscclk",
+	    PLL_LOCKTIME_PLL_SHARED1, PLL_CON3_PLL_SHARED1,
+	    NULL),
+	PLL(pll_0831x, 0, "fout_mmc_pll", "oscclk",
+	    PLL_LOCKTIME_PLL_MMC, PLL_CON3_PLL_MMC, NULL),
+};
+
+/* List of parent clocks for Muxes in CMU_TOP */
+PNAME(mout_shared0_pll_p)	= { "oscclk", "fout_shared0_pll" };
+PNAME(mout_shared1_pll_p)	= { "oscclk", "fout_shared1_pll" };
+PNAME(mout_mmc_pll_p)		= { "oscclk", "fout_mmc_pll" };
+/* List of parent clocks for Muxes in CMU_TOP: for CMU_CORE */
+PNAME(mout_core_bus_p)		= { "dout_shared1_div2", "dout_shared0_div3",
+				    "dout_shared1_div3", "dout_shared0_div4" };
+PNAME(mout_core_cci_p)		= { "dout_shared0_div2", "dout_shared1_div2",
+				    "dout_shared0_div3", "dout_shared1_div3" };
+PNAME(mout_core_mmc_embd_p)	= { "oscclk", "dout_shared0_div2",
+				    "dout_shared1_div2", "dout_shared0_div3",
+				    "dout_shared1_div3", "mout_mmc_pll",
+				    "oscclk", "oscclk" };
+PNAME(mout_core_sss_p)		= { "dout_shared0_div3", "dout_shared1_div3",
+				    "dout_shared0_div4", "dout_shared1_div4" };
+/* List of parent clocks for Muxes in CMU_TOP: for CMU_HSI */
+PNAME(mout_hsi_bus_p)		= { "dout_shared0_div2", "dout_shared1_div2" };
+PNAME(mout_hsi_mmc_card_p)	= { "oscclk", "dout_shared0_div2",
+				    "dout_shared1_div2", "dout_shared0_div3",
+				    "dout_shared1_div3", "mout_mmc_pll",
+				    "oscclk", "oscclk" };
+PNAME(mout_hsi_usb20drd_p)	= { "oscclk", "dout_shared0_div4",
+				    "dout_shared1_div4", "oscclk" };
+/* List of parent clocks for Muxes in CMU_TOP: for CMU_PERI */
+PNAME(mout_peri_bus_p)		= { "dout_shared0_div4", "dout_shared1_div4" };
+PNAME(mout_peri_uart_p)		= { "oscclk", "dout_shared0_div4",
+				    "dout_shared1_div4", "oscclk" };
+PNAME(mout_peri_ip_p)		= { "oscclk", "dout_shared0_div4",
+				    "dout_shared1_div4", "oscclk" };
+
+static const struct samsung_mux_clock top_mux_clks[] __initconst = {
+	/* CMU_TOP_PURECLKCOMP */
+	MUX(0, "mout_shared0_pll", mout_shared0_pll_p,
+	    PLL_CON0_PLL_SHARED0, 4, 1),
+	MUX(0, "mout_shared1_pll", mout_shared1_pll_p,
+	    PLL_CON0_PLL_SHARED1, 4, 1),
+	MUX(0, "mout_mmc_pll", mout_mmc_pll_p,
+	    PLL_CON0_PLL_MMC, 4, 1),
+
+	/* CORE */
+	MUX(0, "mout_core_bus", mout_core_bus_p,
+	    CLK_CON_MUX_MUX_CLKCMU_CORE_BUS, 0, 2),
+	MUX(0, "mout_core_cci", mout_core_cci_p,
+	    CLK_CON_MUX_MUX_CLKCMU_CORE_CCI, 0, 2),
+	MUX(0, "mout_core_mmc_embd", mout_core_mmc_embd_p,
+	    CLK_CON_MUX_MUX_CLKCMU_CORE_MMC_EMBD, 0, 3),
+	MUX(0, "mout_core_sss", mout_core_sss_p,
+	    CLK_CON_MUX_MUX_CLKCMU_CORE_SSS, 0, 2),
+
+	/* HSI */
+	MUX(0, "mout_hsi_bus", mout_hsi_bus_p,
+	    CLK_CON_MUX_MUX_CLKCMU_HSI_BUS, 0, 1),
+	MUX(0, "mout_hsi_mmc_card", mout_hsi_mmc_card_p,
+	    CLK_CON_MUX_MUX_CLKCMU_HSI_MMC_CARD, 0, 3),
+	MUX(0, "mout_hsi_usb20drd", mout_hsi_usb20drd_p,
+	    CLK_CON_MUX_MUX_CLKCMU_HSI_USB20DRD, 0, 2),
+
+	/* PERI */
+	MUX(0, "mout_peri_bus", mout_peri_bus_p,
+	    CLK_CON_MUX_MUX_CLKCMU_PERI_BUS, 0, 1),
+	MUX(0, "mout_peri_uart", mout_peri_uart_p,
+	    CLK_CON_MUX_MUX_CLKCMU_PERI_UART, 0, 2),
+	MUX(0, "mout_peri_ip", mout_peri_ip_p,
+	    CLK_CON_MUX_MUX_CLKCMU_PERI_IP, 0, 2),
+};
+
+static const struct samsung_div_clock top_div_clks[] __initconst = {
+	/* CMU_TOP_PURECLKCOMP */
+	DIV(0, "dout_shared0_div3", "mout_shared0_pll",
+	    CLK_CON_DIV_PLL_SHARED0_DIV3, 0, 2),
+	DIV(0, "dout_shared0_div2", "mout_shared0_pll",
+	    CLK_CON_DIV_PLL_SHARED0_DIV2, 0, 1),
+	DIV(0, "dout_shared1_div3", "mout_shared1_pll",
+	    CLK_CON_DIV_PLL_SHARED1_DIV3, 0, 2),
+	DIV(0, "dout_shared1_div2", "mout_shared1_pll",
+	    CLK_CON_DIV_PLL_SHARED1_DIV2, 0, 1),
+	DIV(0, "dout_shared0_div4", "dout_shared0_div2",
+	    CLK_CON_DIV_PLL_SHARED0_DIV4, 0, 1),
+	DIV(0, "dout_shared1_div4", "dout_shared1_div2",
+	    CLK_CON_DIV_PLL_SHARED1_DIV4, 0, 1),
+
+	/* CORE */
+	DIV(DOUT_CORE_BUS, "dout_core_bus", "gout_core_bus",
+	    CLK_CON_DIV_CLKCMU_CORE_BUS, 0, 4),
+	DIV(DOUT_CORE_CCI, "dout_core_cci", "gout_core_cci",
+	    CLK_CON_DIV_CLKCMU_CORE_CCI, 0, 4),
+	DIV(DOUT_CORE_MMC_EMBD, "dout_core_mmc_embd", "gout_core_mmc_embd",
+	    CLK_CON_DIV_CLKCMU_CORE_MMC_EMBD, 0, 9),
+	DIV(DOUT_CORE_SSS, "dout_core_sss", "gout_core_sss",
+	    CLK_CON_DIV_CLKCMU_CORE_SSS, 0, 4),
+
+	/* HSI */
+	DIV(DOUT_HSI_BUS, "dout_hsi_bus", "gout_hsi_bus",
+	    CLK_CON_DIV_CLKCMU_HSI_BUS, 0, 4),
+	DIV(DOUT_HSI_MMC_CARD, "dout_hsi_mmc_card", "gout_hsi_mmc_card",
+	    CLK_CON_DIV_CLKCMU_HSI_MMC_CARD, 0, 9),
+	DIV(DOUT_HSI_USB20DRD, "dout_hsi_usb20drd", "gout_hsi_usb20drd",
+	    CLK_CON_DIV_CLKCMU_HSI_USB20DRD, 0, 4),
+
+	/* PERI */
+	DIV(DOUT_PERI_BUS, "dout_peri_bus", "gout_peri_bus",
+	    CLK_CON_DIV_CLKCMU_PERI_BUS, 0, 4),
+	DIV(DOUT_PERI_UART, "dout_peri_uart", "gout_peri_uart",
+	    CLK_CON_DIV_CLKCMU_PERI_UART, 0, 4),
+	DIV(DOUT_PERI_IP, "dout_peri_ip", "gout_peri_ip",
+	    CLK_CON_DIV_CLKCMU_PERI_IP, 0, 4),
+};
+
+static const struct samsung_gate_clock top_gate_clks[] __initconst = {
+	/* CORE */
+	GATE(0, "gout_core_bus", "mout_core_bus",
+	     CLK_CON_GAT_GATE_CLKCMU_CORE_BUS, 21, 0, 0),
+	GATE(0, "gout_core_cci", "mout_core_cci",
+	     CLK_CON_GAT_GATE_CLKCMU_CORE_CCI, 21, 0, 0),
+	GATE(0, "gout_core_mmc_embd", "mout_core_mmc_embd",
+	     CLK_CON_GAT_GATE_CLKCMU_CORE_MMC_EMBD, 21, 0, 0),
+	GATE(0, "gout_core_sss", "mout_core_sss",
+	     CLK_CON_GAT_GATE_CLKCMU_CORE_SSS, 21, 0, 0),
+
+	/* HSI */
+	GATE(0, "gout_hsi_bus", "mout_hsi_bus",
+	     CLK_CON_GAT_GATE_CLKCMU_HSI_BUS, 21, 0, 0),
+	GATE(0, "gout_hsi_mmc_card", "mout_hsi_mmc_card",
+	     CLK_CON_GAT_GATE_CLKCMU_HSI_MMC_CARD, 21, 0, 0),
+	GATE(0, "gout_hsi_usb20drd", "mout_hsi_usb20drd",
+	     CLK_CON_GAT_GATE_CLKCMU_HSI_USB20DRD, 21, 0, 0),
+
+	/* PERI */
+	GATE(0, "gout_peri_bus", "mout_peri_bus",
+	     CLK_CON_GAT_GATE_CLKCMU_PERI_BUS, 21, 0, 0),
+	GATE(0, "gout_peri_uart", "mout_peri_uart",
+	     CLK_CON_GAT_GATE_CLKCMU_PERI_UART, 21, 0, 0),
+	GATE(0, "gout_peri_ip", "mout_peri_ip",
+	     CLK_CON_GAT_GATE_CLKCMU_PERI_IP, 21, 0, 0),
+};
+
+static const struct samsung_cmu_info top_cmu_info __initconst = {
+	.pll_clks		= top_pll_clks,
+	.nr_pll_clks		= ARRAY_SIZE(top_pll_clks),
+	.mux_clks		= top_mux_clks,
+	.nr_mux_clks		= ARRAY_SIZE(top_mux_clks),
+	.div_clks		= top_div_clks,
+	.nr_div_clks		= ARRAY_SIZE(top_div_clks),
+	.gate_clks		= top_gate_clks,
+	.nr_gate_clks		= ARRAY_SIZE(top_gate_clks),
+	.nr_clk_ids		= TOP_NR_CLK,
+	.clk_regs		= top_clk_regs,
+	.nr_clk_regs		= ARRAY_SIZE(top_clk_regs),
+};
+
+static void __init exynos850_cmu_top_init(struct device_node *np)
+{
+	exynos850_init_clocks(np, top_clk_regs, ARRAY_SIZE(top_clk_regs));
+	samsung_cmu_register_one(np, &top_cmu_info);
+}
+
+CLK_OF_DECLARE(exynos850_cmu_top, "samsung,exynos850-cmu-top",
+	       exynos850_cmu_top_init);
+
+/* Register Offset definitions for CMU_HSI (0x13400000) */
+#define PLL_CON0_MUX_CLKCMU_HSI_BUS_USER			0x0600
+#define PLL_CON0_MUX_CLKCMU_HSI_MMC_CARD_USER			0x0610
+#define PLL_CON0_MUX_CLKCMU_HSI_USB20DRD_USER			0x0620
+#define CLK_CON_MUX_MUX_CLK_HSI_RTC				0x1000
+#define CLK_CON_GAT_HSI_USB20DRD_TOP_I_RTC_CLK__ALV		0x2008
+#define CLK_CON_GAT_HSI_USB20DRD_TOP_I_REF_CLK_50		0x200c
+#define CLK_CON_GAT_HSI_USB20DRD_TOP_I_PHY_REFCLK_26		0x2010
+#define CLK_CON_GAT_GOUT_HSI_GPIO_HSI_PCLK			0x2018
+#define CLK_CON_GAT_GOUT_HSI_MMC_CARD_I_ACLK			0x2024
+#define CLK_CON_GAT_GOUT_HSI_MMC_CARD_SDCLKIN			0x2028
+#define CLK_CON_GAT_GOUT_HSI_SYSREG_HSI_PCLK			0x2038
+#define CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_ACLK_PHYCTRL_20	0x203c
+#define CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_BUS_CLK_EARLY		0x2040
+
+static const unsigned long hsi_clk_regs[] __initconst = {
+	PLL_CON0_MUX_CLKCMU_HSI_BUS_USER,
+	PLL_CON0_MUX_CLKCMU_HSI_MMC_CARD_USER,
+	PLL_CON0_MUX_CLKCMU_HSI_USB20DRD_USER,
+	CLK_CON_MUX_MUX_CLK_HSI_RTC,
+	CLK_CON_GAT_HSI_USB20DRD_TOP_I_RTC_CLK__ALV,
+	CLK_CON_GAT_HSI_USB20DRD_TOP_I_REF_CLK_50,
+	CLK_CON_GAT_HSI_USB20DRD_TOP_I_PHY_REFCLK_26,
+	CLK_CON_GAT_GOUT_HSI_GPIO_HSI_PCLK,
+	CLK_CON_GAT_GOUT_HSI_MMC_CARD_I_ACLK,
+	CLK_CON_GAT_GOUT_HSI_MMC_CARD_SDCLKIN,
+	CLK_CON_GAT_GOUT_HSI_SYSREG_HSI_PCLK,
+	CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_ACLK_PHYCTRL_20,
+	CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_BUS_CLK_EARLY,
+};
+
+/* List of parent clocks for Muxes in CMU_PERI */
+PNAME(mout_hsi_bus_user_p)	= { "oscclk", "dout_hsi_bus" };
+PNAME(mout_hsi_mmc_card_user_p)	= { "oscclk", "dout_hsi_mmc_card" };
+PNAME(mout_hsi_usb20drd_user_p)	= { "oscclk", "dout_hsi_usb20drd" };
+PNAME(mout_hsi_rtc_p)		= { "rtcclk", "oscclk" };
+
+static const struct samsung_mux_clock hsi_mux_clks[] __initconst = {
+	MUX(0, "mout_hsi_bus_user", mout_hsi_bus_user_p,
+	    PLL_CON0_MUX_CLKCMU_HSI_BUS_USER, 4, 1),
+	MUX_F(0, "mout_hsi_mmc_card_user", mout_hsi_mmc_card_user_p,
+	      PLL_CON0_MUX_CLKCMU_HSI_MMC_CARD_USER, 4, 1,
+	      CLK_SET_RATE_PARENT, 0),
+	MUX(0, "mout_hsi_usb20drd_user", mout_hsi_usb20drd_user_p,
+	    PLL_CON0_MUX_CLKCMU_HSI_USB20DRD_USER, 4, 1),
+	MUX(0, "mout_hsi_rtc", mout_hsi_rtc_p,
+	    CLK_CON_MUX_MUX_CLK_HSI_RTC, 0, 1),
+};
+
+static const struct samsung_gate_clock hsi_gate_clks[] __initconst = {
+	GATE(GOUT_USB_RTC_CLK, "gout_usb_rtc", "mout_hsi_rtc",
+	     CLK_CON_GAT_HSI_USB20DRD_TOP_I_RTC_CLK__ALV, 21, 0, 0),
+	GATE(GOUT_USB_REF_CLK, "gout_usb_ref", "mout_hsi_usb20drd_user",
+	     CLK_CON_GAT_HSI_USB20DRD_TOP_I_REF_CLK_50, 21, 0, 0),
+	GATE(GOUT_USB_PHY_REF_CLK, "gout_usb_phy_ref", "oscclk",
+	     CLK_CON_GAT_HSI_USB20DRD_TOP_I_PHY_REFCLK_26, 21, 0, 0),
+	GATE(GOUT_GPIO_HSI_PCLK, "gout_gpio_hsi_pclk", "mout_hsi_bus_user",
+	     CLK_CON_GAT_GOUT_HSI_GPIO_HSI_PCLK, 21, 0, 0),
+	GATE(GOUT_MMC_CARD_ACLK, "gout_mmc_card_aclk", "mout_hsi_bus_user",
+	     CLK_CON_GAT_GOUT_HSI_MMC_CARD_I_ACLK, 21, 0, 0),
+	GATE(GOUT_MMC_CARD_SDCLKIN, "gout_mmc_card_sdclkin",
+				    "mout_hsi_mmc_card_user",
+	     CLK_CON_GAT_GOUT_HSI_MMC_CARD_SDCLKIN, 21, CLK_SET_RATE_PARENT, 0),
+	GATE(GOUT_SYSREG_HSI_PCLK, "gout_sysreg_hsi_pclk", "mout_hsi_bus_user",
+	     CLK_CON_GAT_GOUT_HSI_SYSREG_HSI_PCLK, 21, 0, 0),
+	GATE(GOUT_USB_PHY_ACLK, "gout_usb_phy_aclk", "mout_hsi_bus_user",
+	     CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_ACLK_PHYCTRL_20, 21, 0, 0),
+	GATE(GOUT_USB_BUS_EARLY_CLK, "gout_usb_bus_early", "mout_hsi_bus_user",
+	     CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_BUS_CLK_EARLY, 21, 0, 0),
+};
+
+static const struct samsung_cmu_info hsi_cmu_info __initconst = {
+	.mux_clks		= hsi_mux_clks,
+	.nr_mux_clks		= ARRAY_SIZE(hsi_mux_clks),
+	.gate_clks		= hsi_gate_clks,
+	.nr_gate_clks		= ARRAY_SIZE(hsi_gate_clks),
+	.nr_clk_ids		= HSI_NR_CLK,
+	.clk_regs		= hsi_clk_regs,
+	.nr_clk_regs		= ARRAY_SIZE(hsi_clk_regs),
+	.clk_name		= "dout_hsi_bus",
+};
+
+static void __init exynos850_cmu_hsi_init(struct device_node *np)
+{
+	exynos850_init_clocks(np, hsi_clk_regs, ARRAY_SIZE(hsi_clk_regs));
+	samsung_cmu_register_one(np, &hsi_cmu_info);
+}
+
+CLK_OF_DECLARE(exynos850_cmu_hsi, "samsung,exynos850-cmu-hsi",
+	       exynos850_cmu_hsi_init);
+
+/* Register Offset definitions for CMU_PERI (0x10030000) */
+#define PLL_CON0_MUX_CLKCMU_PERI_BUS_USER	0x0600
+#define PLL_CON0_MUX_CLKCMU_PERI_HSI2C_USER	0x0610
+#define PLL_CON0_MUX_CLKCMU_PERI_SPI_USER	0x0620
+#define PLL_CON0_MUX_CLKCMU_PERI_UART_USER	0x0630
+#define CLK_CON_DIV_DIV_CLK_PERI_HSI2C_0	0x1800
+#define CLK_CON_DIV_DIV_CLK_PERI_HSI2C_1	0x1804
+#define CLK_CON_DIV_DIV_CLK_PERI_HSI2C_2	0x1808
+#define CLK_CON_DIV_DIV_CLK_PERI_SPI_0		0x180c
+#define CLK_CON_GAT_GATE_CLK_PERI_HSI2C_0	0x200c
+#define CLK_CON_GAT_GATE_CLK_PERI_HSI2C_1	0x2010
+#define CLK_CON_GAT_GATE_CLK_PERI_HSI2C_2	0x2014
+#define CLK_CON_GAT_GOUT_PERI_GPIO_PERI_PCLK	0x2020
+#define CLK_CON_GAT_GOUT_PERI_HSI2C_0_IPCLK	0x2024
+#define CLK_CON_GAT_GOUT_PERI_HSI2C_0_PCLK	0x2028
+#define CLK_CON_GAT_GOUT_PERI_HSI2C_1_IPCLK	0x202c
+#define CLK_CON_GAT_GOUT_PERI_HSI2C_1_PCLK	0x2030
+#define CLK_CON_GAT_GOUT_PERI_HSI2C_2_IPCLK	0x2034
+#define CLK_CON_GAT_GOUT_PERI_HSI2C_2_PCLK	0x2038
+#define CLK_CON_GAT_GOUT_PERI_I2C_0_PCLK	0x203c
+#define CLK_CON_GAT_GOUT_PERI_I2C_1_PCLK	0x2040
+#define CLK_CON_GAT_GOUT_PERI_I2C_2_PCLK	0x2044
+#define CLK_CON_GAT_GOUT_PERI_I2C_3_PCLK	0x2048
+#define CLK_CON_GAT_GOUT_PERI_I2C_4_PCLK	0x204c
+#define CLK_CON_GAT_GOUT_PERI_I2C_5_PCLK	0x2050
+#define CLK_CON_GAT_GOUT_PERI_I2C_6_PCLK	0x2054
+#define CLK_CON_GAT_GOUT_PERI_MCT_PCLK		0x205c
+#define CLK_CON_GAT_GOUT_PERI_PWM_MOTOR_PCLK	0x2064
+#define CLK_CON_GAT_GOUT_PERI_SPI_0_IPCLK	0x209c
+#define CLK_CON_GAT_GOUT_PERI_SPI_0_PCLK	0x20a0
+#define CLK_CON_GAT_GOUT_PERI_SYSREG_PERI_PCLK	0x20a4
+#define CLK_CON_GAT_GOUT_PERI_UART_IPCLK	0x20a8
+#define CLK_CON_GAT_GOUT_PERI_UART_PCLK		0x20ac
+#define CLK_CON_GAT_GOUT_PERI_WDT_0_PCLK	0x20b0
+#define CLK_CON_GAT_GOUT_PERI_WDT_1_PCLK	0x20b4
+
+static const unsigned long peri_clk_regs[] __initconst = {
+	PLL_CON0_MUX_CLKCMU_PERI_BUS_USER,
+	PLL_CON0_MUX_CLKCMU_PERI_HSI2C_USER,
+	PLL_CON0_MUX_CLKCMU_PERI_SPI_USER,
+	PLL_CON0_MUX_CLKCMU_PERI_UART_USER,
+	CLK_CON_DIV_DIV_CLK_PERI_HSI2C_0,
+	CLK_CON_DIV_DIV_CLK_PERI_HSI2C_1,
+	CLK_CON_DIV_DIV_CLK_PERI_HSI2C_2,
+	CLK_CON_DIV_DIV_CLK_PERI_SPI_0,
+	CLK_CON_GAT_GATE_CLK_PERI_HSI2C_0,
+	CLK_CON_GAT_GATE_CLK_PERI_HSI2C_1,
+	CLK_CON_GAT_GATE_CLK_PERI_HSI2C_2,
+	CLK_CON_GAT_GOUT_PERI_GPIO_PERI_PCLK,
+	CLK_CON_GAT_GOUT_PERI_HSI2C_0_IPCLK,
+	CLK_CON_GAT_GOUT_PERI_HSI2C_0_PCLK,
+	CLK_CON_GAT_GOUT_PERI_HSI2C_1_IPCLK,
+	CLK_CON_GAT_GOUT_PERI_HSI2C_1_PCLK,
+	CLK_CON_GAT_GOUT_PERI_HSI2C_2_IPCLK,
+	CLK_CON_GAT_GOUT_PERI_HSI2C_2_PCLK,
+	CLK_CON_GAT_GOUT_PERI_I2C_0_PCLK,
+	CLK_CON_GAT_GOUT_PERI_I2C_1_PCLK,
+	CLK_CON_GAT_GOUT_PERI_I2C_2_PCLK,
+	CLK_CON_GAT_GOUT_PERI_I2C_3_PCLK,
+	CLK_CON_GAT_GOUT_PERI_I2C_4_PCLK,
+	CLK_CON_GAT_GOUT_PERI_I2C_5_PCLK,
+	CLK_CON_GAT_GOUT_PERI_I2C_6_PCLK,
+	CLK_CON_GAT_GOUT_PERI_MCT_PCLK,
+	CLK_CON_GAT_GOUT_PERI_PWM_MOTOR_PCLK,
+	CLK_CON_GAT_GOUT_PERI_SPI_0_IPCLK,
+	CLK_CON_GAT_GOUT_PERI_SPI_0_PCLK,
+	CLK_CON_GAT_GOUT_PERI_SYSREG_PERI_PCLK,
+	CLK_CON_GAT_GOUT_PERI_UART_IPCLK,
+	CLK_CON_GAT_GOUT_PERI_UART_PCLK,
+	CLK_CON_GAT_GOUT_PERI_WDT_0_PCLK,
+	CLK_CON_GAT_GOUT_PERI_WDT_1_PCLK,
+};
+
+/* List of parent clocks for Muxes in CMU_PERI */
+PNAME(mout_peri_bus_user_p)	= { "oscclk", "dout_peri_bus" };
+PNAME(mout_peri_uart_user_p)	= { "oscclk", "dout_peri_uart" };
+PNAME(mout_peri_hsi2c_user_p)	= { "oscclk", "dout_peri_ip" };
+PNAME(mout_peri_spi_user_p)	= { "oscclk", "dout_peri_ip" };
+
+static const struct samsung_mux_clock peri_mux_clks[] __initconst = {
+	MUX(0, "mout_peri_bus_user", mout_peri_bus_user_p,
+	    PLL_CON0_MUX_CLKCMU_PERI_BUS_USER, 4, 1),
+	MUX(0, "mout_peri_uart_user", mout_peri_uart_user_p,
+	    PLL_CON0_MUX_CLKCMU_PERI_UART_USER, 4, 1),
+	MUX(0, "mout_peri_hsi2c_user", mout_peri_hsi2c_user_p,
+	    PLL_CON0_MUX_CLKCMU_PERI_HSI2C_USER, 4, 1),
+	MUX(0, "mout_peri_spi_user", mout_peri_spi_user_p,
+	    PLL_CON0_MUX_CLKCMU_PERI_SPI_USER, 4, 1),
+};
+
+static const struct samsung_div_clock peri_div_clks[] __initconst = {
+	DIV(0, "dout_peri_hsi2c0", "gout_peri_hsi2c0",
+	    CLK_CON_DIV_DIV_CLK_PERI_HSI2C_0, 0, 5),
+	DIV(0, "dout_peri_hsi2c1", "gout_peri_hsi2c1",
+	    CLK_CON_DIV_DIV_CLK_PERI_HSI2C_1, 0, 5),
+	DIV(0, "dout_peri_hsi2c2", "gout_peri_hsi2c2",
+	    CLK_CON_DIV_DIV_CLK_PERI_HSI2C_2, 0, 5),
+	DIV(0, "dout_peri_spi0", "mout_peri_spi_user",
+	    CLK_CON_DIV_DIV_CLK_PERI_SPI_0, 0, 5),
+};
+
+static const struct samsung_gate_clock peri_gate_clks[] __initconst = {
+	GATE(0, "gout_peri_hsi2c0", "mout_peri_hsi2c_user",
+	     CLK_CON_GAT_GATE_CLK_PERI_HSI2C_0, 21, 0, 0),
+	GATE(0, "gout_peri_hsi2c1", "mout_peri_hsi2c_user",
+	     CLK_CON_GAT_GATE_CLK_PERI_HSI2C_1, 21, 0, 0),
+	GATE(0, "gout_peri_hsi2c2", "mout_peri_hsi2c_user",
+	     CLK_CON_GAT_GATE_CLK_PERI_HSI2C_2, 21, 0, 0),
+	GATE(GOUT_HSI2C0_IPCLK, "gout_hsi2c0_ipclk", "dout_peri_hsi2c0",
+	     CLK_CON_GAT_GOUT_PERI_HSI2C_0_IPCLK, 21, 0, 0),
+	GATE(GOUT_HSI2C0_PCLK, "gout_hsi2c0_pclk", "mout_peri_bus_user",
+	     CLK_CON_GAT_GOUT_PERI_HSI2C_0_PCLK, 21, 0, 0),
+	GATE(GOUT_HSI2C1_IPCLK, "gout_hsi2c1_ipclk", "dout_peri_hsi2c1",
+	     CLK_CON_GAT_GOUT_PERI_HSI2C_1_IPCLK, 21, 0, 0),
+	GATE(GOUT_HSI2C1_PCLK, "gout_hsi2c1_pclk", "mout_peri_bus_user",
+	     CLK_CON_GAT_GOUT_PERI_HSI2C_1_PCLK, 21, 0, 0),
+	GATE(GOUT_HSI2C2_IPCLK, "gout_hsi2c2_ipclk", "dout_peri_hsi2c2",
+	     CLK_CON_GAT_GOUT_PERI_HSI2C_2_IPCLK, 21, 0, 0),
+	GATE(GOUT_HSI2C2_PCLK, "gout_hsi2c2_pclk", "mout_peri_bus_user",
+	     CLK_CON_GAT_GOUT_PERI_HSI2C_2_PCLK, 21, 0, 0),
+	GATE(GOUT_I2C0_PCLK, "gout_i2c0_pclk", "mout_peri_bus_user",
+	     CLK_CON_GAT_GOUT_PERI_I2C_0_PCLK, 21, 0, 0),
+	GATE(GOUT_I2C1_PCLK, "gout_i2c1_pclk", "mout_peri_bus_user",
+	     CLK_CON_GAT_GOUT_PERI_I2C_1_PCLK, 21, 0, 0),
+	GATE(GOUT_I2C2_PCLK, "gout_i2c2_pclk", "mout_peri_bus_user",
+	     CLK_CON_GAT_GOUT_PERI_I2C_2_PCLK, 21, 0, 0),
+	GATE(GOUT_I2C3_PCLK, "gout_i2c3_pclk", "mout_peri_bus_user",
+	     CLK_CON_GAT_GOUT_PERI_I2C_3_PCLK, 21, 0, 0),
+	GATE(GOUT_I2C4_PCLK, "gout_i2c4_pclk", "mout_peri_bus_user",
+	     CLK_CON_GAT_GOUT_PERI_I2C_4_PCLK, 21, 0, 0),
+	GATE(GOUT_I2C5_PCLK, "gout_i2c5_pclk", "mout_peri_bus_user",
+	     CLK_CON_GAT_GOUT_PERI_I2C_5_PCLK, 21, 0, 0),
+	GATE(GOUT_I2C6_PCLK, "gout_i2c6_pclk", "mout_peri_bus_user",
+	     CLK_CON_GAT_GOUT_PERI_I2C_6_PCLK, 21, 0, 0),
+	GATE(GOUT_MCT_PCLK, "gout_mct_pclk", "mout_peri_bus_user",
+	     CLK_CON_GAT_GOUT_PERI_MCT_PCLK, 21, 0, 0),
+	GATE(GOUT_PWM_MOTOR_PCLK, "gout_pwm_motor_pclk", "mout_peri_bus_user",
+	     CLK_CON_GAT_GOUT_PERI_PWM_MOTOR_PCLK, 21, 0, 0),
+	GATE(GOUT_SPI0_IPCLK, "gout_spi0_ipclk", "dout_peri_spi0",
+	     CLK_CON_GAT_GOUT_PERI_SPI_0_IPCLK, 21, 0, 0),
+	GATE(GOUT_SPI0_PCLK, "gout_spi0_pclk", "mout_peri_bus_user",
+	     CLK_CON_GAT_GOUT_PERI_SPI_0_PCLK, 21, 0, 0),
+	GATE(GOUT_SYSREG_PERI_PCLK, "gout_sysreg_peri_pclk",
+				    "mout_peri_bus_user",
+	     CLK_CON_GAT_GOUT_PERI_SYSREG_PERI_PCLK, 21, 0, 0),
+	GATE(GOUT_UART_IPCLK, "gout_uart_ipclk", "mout_peri_uart_user",
+	     CLK_CON_GAT_GOUT_PERI_UART_IPCLK, 21, 0, 0),
+	GATE(GOUT_UART_PCLK, "gout_uart_pclk", "mout_peri_bus_user",
+	     CLK_CON_GAT_GOUT_PERI_UART_PCLK, 21, 0, 0),
+	GATE(GOUT_WDT0_PCLK, "gout_wdt0_pclk", "mout_peri_bus_user",
+	     CLK_CON_GAT_GOUT_PERI_WDT_0_PCLK, 21, 0, 0),
+	GATE(GOUT_WDT1_PCLK, "gout_wdt1_pclk", "mout_peri_bus_user",
+	     CLK_CON_GAT_GOUT_PERI_WDT_1_PCLK, 21, 0, 0),
+	GATE(GOUT_GPIO_PERI_PCLK, "gout_gpio_peri_pclk", "mout_peri_bus_user",
+	     CLK_CON_GAT_GOUT_PERI_GPIO_PERI_PCLK, 21, 0, 0),
+};
+
+static const struct samsung_cmu_info peri_cmu_info __initconst = {
+	.mux_clks		= peri_mux_clks,
+	.nr_mux_clks		= ARRAY_SIZE(peri_mux_clks),
+	.div_clks		= peri_div_clks,
+	.nr_div_clks		= ARRAY_SIZE(peri_div_clks),
+	.gate_clks		= peri_gate_clks,
+	.nr_gate_clks		= ARRAY_SIZE(peri_gate_clks),
+	.nr_clk_ids		= PERI_NR_CLK,
+	.clk_regs		= peri_clk_regs,
+	.nr_clk_regs		= ARRAY_SIZE(peri_clk_regs),
+	.clk_name		= "dout_peri_bus",
+};
+
+static void __init exynos850_cmu_peri_init(struct device_node *np)
+{
+	exynos850_init_clocks(np, peri_clk_regs, ARRAY_SIZE(peri_clk_regs));
+	samsung_cmu_register_one(np, &peri_cmu_info);
+}
+
+CLK_OF_DECLARE(exynos850_cmu_peri, "samsung,exynos850-cmu-peri",
+	       exynos850_cmu_peri_init);
+
+/* Register Offset definitions for CMU_CORE (0x12000000) */
+#define PLL_CON0_MUX_CLKCMU_CORE_BUS_USER	0x0600
+#define PLL_CON0_MUX_CLKCMU_CORE_CCI_USER	0x0610
+#define PLL_CON0_MUX_CLKCMU_CORE_MMC_EMBD_USER	0x0620
+#define PLL_CON0_MUX_CLKCMU_CORE_SSS_USER	0x0630
+#define CLK_CON_MUX_MUX_CLK_CORE_GIC		0x1000
+#define CLK_CON_DIV_DIV_CLK_CORE_BUSP		0x1800
+#define CLK_CON_GAT_GOUT_CORE_CCI_550_ACLK	0x2038
+#define CLK_CON_GAT_GOUT_CORE_GIC_CLK		0x2040
+#define CLK_CON_GAT_GOUT_CORE_MMC_EMBD_I_ACLK	0x20e8
+#define CLK_CON_GAT_GOUT_CORE_MMC_EMBD_SDCLKIN	0x20ec
+#define CLK_CON_GAT_GOUT_CORE_SSS_I_ACLK	0x2128
+#define CLK_CON_GAT_GOUT_CORE_SSS_I_PCLK	0x212c
+
+static const unsigned long core_clk_regs[] __initconst = {
+	PLL_CON0_MUX_CLKCMU_CORE_BUS_USER,
+	PLL_CON0_MUX_CLKCMU_CORE_CCI_USER,
+	PLL_CON0_MUX_CLKCMU_CORE_MMC_EMBD_USER,
+	PLL_CON0_MUX_CLKCMU_CORE_SSS_USER,
+	CLK_CON_MUX_MUX_CLK_CORE_GIC,
+	CLK_CON_DIV_DIV_CLK_CORE_BUSP,
+	CLK_CON_GAT_GOUT_CORE_CCI_550_ACLK,
+	CLK_CON_GAT_GOUT_CORE_GIC_CLK,
+	CLK_CON_GAT_GOUT_CORE_MMC_EMBD_I_ACLK,
+	CLK_CON_GAT_GOUT_CORE_MMC_EMBD_SDCLKIN,
+	CLK_CON_GAT_GOUT_CORE_SSS_I_ACLK,
+	CLK_CON_GAT_GOUT_CORE_SSS_I_PCLK,
+};
+
+/* List of parent clocks for Muxes in CMU_CORE */
+PNAME(mout_core_bus_user_p)		= { "oscclk", "dout_core_bus" };
+PNAME(mout_core_cci_user_p)		= { "oscclk", "dout_core_cci" };
+PNAME(mout_core_mmc_embd_user_p)	= { "oscclk", "dout_core_mmc_embd" };
+PNAME(mout_core_sss_user_p)		= { "oscclk", "dout_core_sss" };
+PNAME(mout_core_gic_p)			= { "dout_core_busp", "oscclk" };
+
+static const struct samsung_mux_clock core_mux_clks[] __initconst = {
+	MUX(0, "mout_core_bus_user", mout_core_bus_user_p,
+	    PLL_CON0_MUX_CLKCMU_CORE_BUS_USER, 4, 1),
+	MUX(0, "mout_core_cci_user", mout_core_cci_user_p,
+	    PLL_CON0_MUX_CLKCMU_CORE_CCI_USER, 4, 1),
+	MUX_F(0, "mout_core_mmc_embd_user", mout_core_mmc_embd_user_p,
+	      PLL_CON0_MUX_CLKCMU_CORE_MMC_EMBD_USER, 4, 1,
+	      CLK_SET_RATE_PARENT, 0),
+	MUX(0, "mout_core_sss_user", mout_core_sss_user_p,
+	    PLL_CON0_MUX_CLKCMU_CORE_SSS_USER, 4, 1),
+	MUX(0, "mout_core_gic", mout_core_gic_p,
+	    CLK_CON_MUX_MUX_CLK_CORE_GIC, 0, 1),
+};
+
+static const struct samsung_div_clock core_div_clks[] __initconst = {
+	DIV(0, "dout_core_busp", "mout_core_bus_user",
+	    CLK_CON_DIV_DIV_CLK_CORE_BUSP, 0, 2),
+};
+
+static const struct samsung_gate_clock core_gate_clks[] __initconst = {
+	GATE(GOUT_CCI_ACLK, "gout_cci_aclk", "mout_core_cci_user",
+	     CLK_CON_GAT_GOUT_CORE_CCI_550_ACLK, 21, 0, 0),
+	GATE(GOUT_GIC_CLK, "gout_gic_clk", "mout_core_gic",
+	     CLK_CON_GAT_GOUT_CORE_GIC_CLK, 21, 0, 0),
+	GATE(GOUT_MMC_EMBD_ACLK, "gout_mmc_embd_aclk", "dout_core_busp",
+	     CLK_CON_GAT_GOUT_CORE_MMC_EMBD_I_ACLK, 21, 0, 0),
+	GATE(GOUT_MMC_EMBD_SDCLKIN, "gout_mmc_embd_sdclkin",
+	     "mout_core_mmc_embd_user", CLK_CON_GAT_GOUT_CORE_MMC_EMBD_SDCLKIN,
+	     21, CLK_SET_RATE_PARENT, 0),
+	GATE(GOUT_SSS_ACLK, "gout_sss_aclk", "mout_core_sss_user",
+	     CLK_CON_GAT_GOUT_CORE_SSS_I_ACLK, 21, 0, 0),
+	GATE(GOUT_SSS_PCLK, "gout_sss_pclk", "dout_core_busp",
+	     CLK_CON_GAT_GOUT_CORE_SSS_I_PCLK, 21, 0, 0),
+};
+
+static const struct samsung_cmu_info core_cmu_info __initconst = {
+	.mux_clks		= core_mux_clks,
+	.nr_mux_clks		= ARRAY_SIZE(core_mux_clks),
+	.div_clks		= core_div_clks,
+	.nr_div_clks		= ARRAY_SIZE(core_div_clks),
+	.gate_clks		= core_gate_clks,
+	.nr_gate_clks		= ARRAY_SIZE(core_gate_clks),
+	.nr_clk_ids		= CORE_NR_CLK,
+	.clk_regs		= core_clk_regs,
+	.nr_clk_regs		= ARRAY_SIZE(core_clk_regs),
+	.clk_name		= "dout_core_bus",
+};
+
+static void __init exynos850_cmu_core_init(struct device_node *np)
+{
+	exynos850_init_clocks(np, core_clk_regs, ARRAY_SIZE(core_clk_regs));
+	samsung_cmu_register_one(np, &core_cmu_info);
+}
+
+CLK_OF_DECLARE(exynos850_cmu_core, "samsung,exynos850-cmu-core",
+	       exynos850_cmu_core_init);