@@ -26,6 +26,7 @@ static const u8 COMMAND_VERSION[] = { 'v' };
// End transmit and repeat reset command so we exit sump mode
static const u8 COMMAND_RESET[] = { 0xff, 0xff, 0, 0, 0, 0, 0 };
static const u8 COMMAND_SMODE_ENTER[] = { 's' };
+static const u8 COMMAND_SMODE_EXIT[] = { 0 };
static const u8 COMMAND_TXSTART[] = { 0x26, 0x24, 0x25, 0x03 };
#define REPLY_XMITCOUNT 't'
@@ -317,12 +318,30 @@ static int irtoy_tx(struct rc_dev *rc, uint *txbuf, uint count)
buf[i] = cpu_to_be16(v);
}
- buf[count] = cpu_to_be16(0xffff);
+ buf[count] = 0xffff;
irtoy->tx_buf = buf;
irtoy->tx_len = size;
irtoy->emitted = 0;
+ // There is an issue where if the unit is receiving IR while the
+ // first TXSTART command is sent, the device might end up hanging
+ // with its led on. It does not respond to any command when this
+ // happens. To work around this, re-enter sample mode.
+ err = irtoy_command(irtoy, COMMAND_SMODE_EXIT,
+ sizeof(COMMAND_SMODE_EXIT), STATE_COMMAND_NO_RESP);
+ if (err) {
+ dev_err(irtoy->dev, "exit sample mode: %d\n", err);
+ return err;
+ }
+
+ err = irtoy_command(irtoy, COMMAND_SMODE_ENTER,
+ sizeof(COMMAND_SMODE_ENTER), STATE_COMMAND);
+ if (err) {
+ dev_err(irtoy->dev, "enter sample mode: %d\n", err);
+ return err;
+ }
+
err = irtoy_command(irtoy, COMMAND_TXSTART, sizeof(COMMAND_TXSTART),
STATE_TX);
kfree(buf);
If the IR Toy is receiving IR while a transmit is done, it may end up hanging. We can prevent this from happening by re-entering sample mode just before issuing the transmit command. Link: https://github.com/bengtmartensson/HarcHardware/discussions/25 Cc: stable@vger.kernel.org Signed-off-by: Sean Young <sean@mess.org> --- drivers/media/rc/ir_toy.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-)