diff mbox series

[v3,22/47] mfd: ti_am335x_tscadc: Gather the ctrl register logic in one place

Message ID 20210915155908.476767-23-miquel.raynal@bootlin.com
State Accepted
Commit b813f32030e2b70adf68f73e99853f91526aa3a1
Headers show
Series TI AM437X ADC1 | expand

Commit Message

Miquel Raynal Sept. 15, 2021, 3:58 p.m. UTC
Instead of deriving in the probe and in the resume path the value of the
ctrl register, let's do it only once in the probe, save the value of
this register (all but the subsystem enable bit) in the driver's
structure and use it from the resume callback.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c       | 39 ++++++++++------------------
 include/linux/mfd/ti_am335x_tscadc.h |  2 +-
 2 files changed, 15 insertions(+), 26 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 951734801139..f627405d16f0 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -121,7 +121,7 @@  static	int ti_tscadc_probe(struct platform_device *pdev)
 	struct property *prop;
 	const __be32 *cur;
 	u32 val;
-	int err, ctrl;
+	int err;
 	int tsc_wires = 0, adc_channels = 0, cell_idx = 0, total_channels;
 	int readouts = 0;
 
@@ -217,22 +217,25 @@  static	int ti_tscadc_probe(struct platform_device *pdev)
 	tscadc->clk_div = (clk_get_rate(clk) / tscadc->data->target_clk_rate) - 1;
 	regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div);
 
-	/* Set the control register bits */
-	ctrl = CNTRLREG_STEPCONFIGWRT |	CNTRLREG_STEPID;
+	/*
+	 * Set the control register bits. tscadc->ctrl stores the configuration
+	 * of the CTRL register but not the subsystem enable bit which must be
+	 * added manually when timely.
+	 */
+	tscadc->ctrl = CNTRLREG_STEPCONFIGWRT | CNTRLREG_STEPID;
 	if (tsc_wires > 0) {
-		tscadc->tsc_wires = tsc_wires;
+		tscadc->ctrl |= CNTRLREG_TSCENB;
 		if (tsc_wires == 5)
-			ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB;
+			tscadc->ctrl |= CNTRLREG_5WIRE;
 		else
-			ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
+			tscadc->ctrl |= CNTRLREG_4WIRE;
 	}
-	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
+	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
 
 	tscadc_idle_config(tscadc);
 
 	/* Enable the TSC module enable bit */
-	ctrl |= CNTRLREG_TSCSSENB;
-	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
+	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_TSCSSENB);
 
 	/* TSC Cell */
 	if (tsc_wires > 0) {
@@ -307,27 +310,13 @@  static int __maybe_unused tscadc_suspend(struct device *dev)
 static int __maybe_unused tscadc_resume(struct device *dev)
 {
 	struct ti_tscadc_dev *tscadc = dev_get_drvdata(dev);
-	u32 ctrl;
 
 	pm_runtime_get_sync(dev);
 
-	/* context restore */
 	regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div);
-
-	ctrl = CNTRLREG_STEPCONFIGWRT |	CNTRLREG_STEPID;
-	if (tscadc->tsc_wires > 0) {
-		if (tscadc->tsc_wires == 5)
-			ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB;
-		else
-			ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
-	}
-
-	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
-
+	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
 	tscadc_idle_config(tscadc);
-
-	ctrl |= CNTRLREG_TSCSSENB;
-	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
+	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_TSCSSENB);
 
 	return 0;
 }
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index e734fb97dff8..02963b6ebbac 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -177,8 +177,8 @@  struct ti_tscadc_dev {
 	phys_addr_t tscadc_phys_base;
 	const struct ti_tscadc_data *data;
 	int irq;
-	int tsc_wires;
 	struct mfd_cell cells[TSCADC_CELLS];
+	u32 ctrl;
 	u32 reg_se_cache;
 	bool adc_waiting;
 	bool adc_in_use;