diff mbox series

[V5,2/2] arm64: dts: sc7280: Add volume up support for sc7280-idp

Message ID 1631798498-10864-3-git-send-email-skakit@codeaurora.org
State New
Headers show
Series [V5,1/2] pinctrl: qcom: spmi-gpio: correct parent irqspec translation | expand

Commit Message

Satya Priya Sept. 16, 2021, 1:21 p.m. UTC 
From: satya priya <skakit@codeaurora.org>

Add pm7325 PMIC gpio support for vol+ on sc7280-idp.

Signed-off-by: satya priya <skakit@codeaurora.org>
---
Changes in V2:
 - No changes.

Changes in V3:
 - Sorted the nodes alphabetically.

Changes in V4:
 - Updated the node names to replace underscores with hipens

Changes in V5:
 - Moved the gpio-keys node under root node.

 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 371a2a9..cbbb0ee 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -12,6 +12,26 @@ 
 #include "pm8350c.dtsi"
 #include "pmk8350.dtsi"
 
+/ {
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_vol_up_default>;
+
+		volume-up {
+			label = "volume_up";
+			gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			gpio-key,wakeup;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+	};
+};
+
 &apps_rsc {
 	pm7325-regulators {
 		compatible = "qcom,pm7325-rpmh-regulators";
@@ -284,6 +304,17 @@ 
 
 /* PINCTRL - additions to nodes defined in sc7280.dtsi */
 
+&pm7325_gpios {
+	key_vol_up_default: key-vol-up-default {
+		pins = "gpio6";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		power-source = <0>;
+		qcom,drive-strength = <3>;
+	};
+};
+
 &qup_uart5_default {
 	tx {
 		pins = "gpio46";