@@ -24,10 +24,7 @@
/* Default operating mode is wlan STA + BT */
static u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL;
module_param(dev_oper_mode, ushort, 0444);
-MODULE_PARM_DESC(dev_oper_mode,
- "1[Wi-Fi], 4[BT], 8[BT LE], 5[Wi-Fi STA + BT classic]\n"
- "9[Wi-Fi STA + BT LE], 13[Wi-Fi STA + BT classic + BT LE]\n"
- "6[AP + BT classic], 14[AP + BT classic + BT LE]");
+MODULE_PARM_DESC(dev_oper_mode, DEV_OPMODE_PARAM_DESC);
/**
* rsi_sdio_set_cmd52_arg() - This function prepares cmd 52 read/write arg.
@@ -25,10 +25,7 @@
/* Default operating mode is wlan STA + BT */
static u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL;
module_param(dev_oper_mode, ushort, 0444);
-MODULE_PARM_DESC(dev_oper_mode,
- "1[Wi-Fi], 4[BT], 8[BT LE], 5[Wi-Fi STA + BT classic]\n"
- "9[Wi-Fi STA + BT LE], 13[Wi-Fi STA + BT classic + BT LE]\n"
- "6[AP + BT classic], 14[AP + BT classic + BT LE]");
+MODULE_PARM_DESC(dev_oper_mode, DEV_OPMODE_PARAM_DESC);
static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num, gfp_t flags);
@@ -28,6 +28,17 @@
#define DEV_OPMODE_AP_BT 6
#define DEV_OPMODE_AP_BT_DUAL 14
+#define DEV_OPMODE_PARAM_DESC \
+ __stringify(DEV_OPMODE_WIFI_ALONE) "[Wi-Fi alone], " \
+ __stringify(DEV_OPMODE_BT_ALONE) "[BT classic alone], " \
+ __stringify(DEV_OPMODE_BT_LE_ALONE) "[BT LE alone], " \
+ __stringify(DEV_OPMODE_BT_DUAL) "[BT classic + BT LE alone], " \
+ __stringify(DEV_OPMODE_STA_BT) "[Wi-Fi STA + BT classic], " \
+ __stringify(DEV_OPMODE_STA_BT_LE) "[Wi-Fi STA + BT LE], " \
+ __stringify(DEV_OPMODE_STA_BT_DUAL) "[Wi-Fi STA + BT classic + BT LE], " \
+ __stringify(DEV_OPMODE_AP_BT) "[Wi-Fi AP + BT classic], " \
+ __stringify(DEV_OPMODE_AP_BT_DUAL) "[Wi-Fi AP + BT classic + BT LE]"
+
#define FLASH_WRITE_CHUNK_SIZE (4 * 1024)
#define FLASH_SECTOR_SIZE (4 * 1024)
The module parameters are missing dev_oper_mode 12, BT classic alone, add it. Moreover, the parameters encode newlines, which ends up being printed malformed e.g. by modinfo, so fix that too. However, the module parameter string is duplicated in both USB and SDIO modules and the dev_oper_mode mode enumeration in those module parameters is a duplicate of macros used by the driver. Furthermore, the enumeration is confusing. So, deduplicate the module parameter string and use __stringify() to encode the correct mode enumeration values into the module parameter string. Finally, replace 'Wi-Fi' with 'Wi-Fi alone' and 'BT' with 'BT classic alone' to clarify what those modes really mean. Fixes: 898b255339310 ("rsi: add module parameter operating mode") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Karun Eagalapati <karun256@gmail.com> Cc: Martin Fuzzey <martin.fuzzey@flowbird.group> Cc: Martin Kepplinger <martink@posteo.de> Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: netdev@vger.kernel.org Cc: <stable@vger.kernel.org> # 4.17+ -- V2: - Update description of DEV_OPMODE_BT_LE_ALONE DEV_OPMODE_BT_DUAL DEV_OPMODE_AP_BT DEV_OPMODE_AP_BT_DUAL to include "alone" and "Wi-Fi" consistently. - Cc netdev and to linux-wireless --- drivers/net/wireless/rsi/rsi_91x_sdio.c | 5 +---- drivers/net/wireless/rsi/rsi_91x_usb.c | 5 +---- drivers/net/wireless/rsi/rsi_hal.h | 11 +++++++++++ 3 files changed, 13 insertions(+), 8 deletions(-)