diff mbox series

[net-next,1/6,v6] net: dsa: rtl8366rb: Support bridge offloading

Message ID 20210925132311.2040272-2-linus.walleij@linaro.org
State Superseded
Headers show
Series RTL8366(RB) cleanups part 1 | expand

Commit Message

Linus Walleij Sept. 25, 2021, 1:23 p.m. UTC
From: DENG Qingfang <dqfext@gmail.com>


Use port isolation registers to configure bridge offloading.

Tested on the D-Link DIR-685, switching between ports and
sniffing ports to make sure no packets leak.

Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

Signed-off-by: DENG Qingfang <dqfext@gmail.com>

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
ChangeLog v5->v6:
- No changes just resending with the rest of the
  patches.
ChangeLog v4->v5:
- No changes just resending with the rest of the
  patches.
ChangeLog v3->v4:
- Fix a bug where I managed to mask off the CPU port
  from the ports we could access leading to numb
  bridge.
- Reword some comments.
ChangeLog v2->v3:
- Parens around the (pmask) in the port isolation macro.
- Do not exit join/leave functions on regmap failures,
  print an error and continue.
- Clarify comments around the port in join/leave
  functions.
ChangeLog v1->v2:
- introduce RTL8366RB_PORT_ISO_PORTS() to shift the port
  mask into place so we are not confused by the enable
  bit.
- Use this with dsa_user_ports() to isolate the CPU port
  from itself.
---
 drivers/net/dsa/rtl8366rb.c | 86 +++++++++++++++++++++++++++++++++++++
 1 file changed, 86 insertions(+)

-- 
2.31.1

Comments

Vladimir Oltean Sept. 25, 2021, 6:30 p.m. UTC | #1
On Sat, Sep 25, 2021 at 03:23:06PM +0200, Linus Walleij wrote:
> From: DENG Qingfang <dqfext@gmail.com>

> 

> Use port isolation registers to configure bridge offloading.

> 

> Tested on the D-Link DIR-685, switching between ports and

> sniffing ports to make sure no packets leak.

> 

> Cc: Vladimir Oltean <olteanv@gmail.com>

> Cc: Mauri Sandberg <sandberg@mailfence.com>

> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>

> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

> Signed-off-by: DENG Qingfang <dqfext@gmail.com>

> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

> ---


Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
diff mbox series

Patch

diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
index a89093bc6c6a..b930050cfd1b 100644
--- a/drivers/net/dsa/rtl8366rb.c
+++ b/drivers/net/dsa/rtl8366rb.c
@@ -300,6 +300,13 @@ 
 #define RTL8366RB_INTERRUPT_STATUS_REG	0x0442
 #define RTL8366RB_NUM_INTERRUPT		14 /* 0..13 */
 
+/* Port isolation registers */
+#define RTL8366RB_PORT_ISO_BASE		0x0F08
+#define RTL8366RB_PORT_ISO(pnum)	(RTL8366RB_PORT_ISO_BASE + (pnum))
+#define RTL8366RB_PORT_ISO_EN		BIT(0)
+#define RTL8366RB_PORT_ISO_PORTS_MASK	GENMASK(7, 1)
+#define RTL8366RB_PORT_ISO_PORTS(pmask)	((pmask) << 1)
+
 /* bits 0..5 enable force when cleared */
 #define RTL8366RB_MAC_FORCE_CTRL_REG	0x0F11
 
@@ -835,6 +842,21 @@  static int rtl8366rb_setup(struct dsa_switch *ds)
 	if (ret)
 		return ret;
 
+	/* Isolate all user ports so they can only send packets to itself and the CPU port */
+	for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+		ret = regmap_write(smi->map, RTL8366RB_PORT_ISO(i),
+				   RTL8366RB_PORT_ISO_PORTS(BIT(RTL8366RB_PORT_NUM_CPU)) |
+				   RTL8366RB_PORT_ISO_EN);
+		if (ret)
+			return ret;
+	}
+	/* CPU port can send packets to all ports */
+	ret = regmap_write(smi->map, RTL8366RB_PORT_ISO(RTL8366RB_PORT_NUM_CPU),
+			   RTL8366RB_PORT_ISO_PORTS(dsa_user_ports(ds)) |
+			   RTL8366RB_PORT_ISO_EN);
+	if (ret)
+		return ret;
+
 	/* Set up the "green ethernet" feature */
 	ret = rtl8366rb_jam_table(rtl8366rb_green_jam,
 				  ARRAY_SIZE(rtl8366rb_green_jam), smi, false);
@@ -1127,6 +1149,68 @@  rtl8366rb_port_disable(struct dsa_switch *ds, int port)
 	rb8366rb_set_port_led(smi, port, false);
 }
 
+static int
+rtl8366rb_port_bridge_join(struct dsa_switch *ds, int port,
+			   struct net_device *bridge)
+{
+	struct realtek_smi *smi = ds->priv;
+	unsigned int port_bitmap = 0;
+	int ret, i;
+
+	/* Loop over all other ports than the current one */
+	for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+		/* Current port handled last */
+		if (i == port)
+			continue;
+		/* Not on this bridge */
+		if (dsa_to_port(ds, i)->bridge_dev != bridge)
+			continue;
+		/* Join this port to each other port on the bridge */
+		ret = regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(i),
+					 RTL8366RB_PORT_ISO_PORTS(BIT(port)),
+					 RTL8366RB_PORT_ISO_PORTS(BIT(port)));
+		if (ret)
+			dev_err(smi->dev, "failed to join port %d\n", port);
+
+		port_bitmap |= BIT(i);
+	}
+
+	/* Set the bits for the ports we can access */
+	return regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(port),
+				  RTL8366RB_PORT_ISO_PORTS(port_bitmap),
+				  RTL8366RB_PORT_ISO_PORTS(port_bitmap));
+}
+
+static void
+rtl8366rb_port_bridge_leave(struct dsa_switch *ds, int port,
+			    struct net_device *bridge)
+{
+	struct realtek_smi *smi = ds->priv;
+	unsigned int port_bitmap = 0;
+	int ret, i;
+
+	/* Loop over all other ports than this one */
+	for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+		/* Current port handled last */
+		if (i == port)
+			continue;
+		/* Not on this bridge */
+		if (dsa_to_port(ds, i)->bridge_dev != bridge)
+			continue;
+		/* Remove this port from any other port on the bridge */
+		ret = regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(i),
+					 RTL8366RB_PORT_ISO_PORTS(BIT(port)), 0);
+		if (ret)
+			dev_err(smi->dev, "failed to leave port %d\n", port);
+
+		port_bitmap |= BIT(i);
+	}
+
+	/* Clear the bits for the ports we can not access, leave ourselves */
+	regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(port),
+			   RTL8366RB_PORT_ISO_PORTS(port_bitmap), 0);
+}
+
 static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
 {
 	struct realtek_smi *smi = ds->priv;
@@ -1510,6 +1594,8 @@  static const struct dsa_switch_ops rtl8366rb_switch_ops = {
 	.get_strings = rtl8366_get_strings,
 	.get_ethtool_stats = rtl8366_get_ethtool_stats,
 	.get_sset_count = rtl8366_get_sset_count,
+	.port_bridge_join = rtl8366rb_port_bridge_join,
+	.port_bridge_leave = rtl8366rb_port_bridge_leave,
 	.port_vlan_filtering = rtl8366_vlan_filtering,
 	.port_vlan_add = rtl8366_vlan_add,
 	.port_vlan_del = rtl8366_vlan_del,