diff mbox series

[v4,09/11] tests/acpi: add test cases for VIOT

Message ID 20211001173358.863017-10-jean-philippe@linaro.org
State Superseded
Headers show
Series virtio-iommu: Add ACPI support | expand

Commit Message

Jean-Philippe Brucker Oct. 1, 2021, 5:33 p.m. UTC
Add two test cases for VIOT, one on the q35 machine and the other on
virt. To test complex topologies the q35 test has two PCIe buses that
bypass the IOMMU (and are therefore not described by VIOT), and two
buses that are translated by virtio-iommu.

Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>

---
 tests/qtest/bios-tables-test.c | 38 ++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

-- 
2.33.0

Comments

Ani Sinha Oct. 5, 2021, 10:27 a.m. UTC | #1
On Fri, 1 Oct 2021, Jean-Philippe Brucker wrote:

> Add two test cases for VIOT, one on the q35 machine and the other on

> virt. To test complex topologies the q35 test has two PCIe buses that

> bypass the IOMMU (and are therefore not described by VIOT), and two

> buses that are translated by virtio-iommu.

>

> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>


This might be a stupid question but what about virtio-mmio and single mmio
cases? I see none of your tables has nodes for those and here too you do
not add test cases for it.

> ---

>  tests/qtest/bios-tables-test.c | 38 ++++++++++++++++++++++++++++++++++

>  1 file changed, 38 insertions(+)

>

> diff --git a/tests/qtest/bios-tables-test.c b/tests/qtest/bios-tables-test.c

> index 4f11d03055..b6cb383bd9 100644

> --- a/tests/qtest/bios-tables-test.c

> +++ b/tests/qtest/bios-tables-test.c

> @@ -1403,6 +1403,42 @@ static void test_acpi_virt_tcg(void)

>      free_test_data(&data);

>  }

>

> +static void test_acpi_q35_viot(void)

> +{

> +    test_data data = {

> +        .machine = MACHINE_Q35,

> +        .variant = ".viot",

> +    };

> +

> +    /*

> +     * To keep things interesting, two buses bypass the IOMMU.

> +     * VIOT should only describes the other two buses.

> +     */

> +    test_acpi_one("-machine default_bus_bypass_iommu=on "

> +                  "-device virtio-iommu "

> +                  "-device pxb-pcie,bus_nr=0x10,id=pcie.100,bus=pcie.0 "

> +                  "-device pxb-pcie,bus_nr=0x20,id=pcie.200,bus=pcie.0,bypass_iommu=on "

> +                  "-device pxb-pcie,bus_nr=0x30,id=pcie.300,bus=pcie.0",

> +                  &data);

> +    free_test_data(&data);

> +}

> +

> +static void test_acpi_virt_viot(void)

> +{

> +    test_data data = {

> +        .machine = "virt",

> +        .uefi_fl1 = "pc-bios/edk2-aarch64-code.fd",

> +        .uefi_fl2 = "pc-bios/edk2-arm-vars.fd",

> +        .cd = "tests/data/uefi-boot-images/bios-tables-test.aarch64.iso.qcow2",

> +        .ram_start = 0x40000000ULL,

> +        .scan_len = 128ULL * 1024 * 1024,

> +    };

> +

> +    test_acpi_one("-cpu cortex-a57 "

> +                  "-device virtio-iommu", &data);

> +    free_test_data(&data);

> +}

> +

>  static void test_oem_fields(test_data *data)

>  {

>      int i;

> @@ -1567,12 +1603,14 @@ int main(int argc, char *argv[])

>          if (strcmp(arch, "x86_64") == 0) {

>              qtest_add_func("acpi/microvm/pcie", test_acpi_microvm_pcie_tcg);

>          }

> +        qtest_add_func("acpi/q35/viot", test_acpi_q35_viot);

>      } else if (strcmp(arch, "aarch64") == 0) {

>          qtest_add_func("acpi/virt", test_acpi_virt_tcg);

>          qtest_add_func("acpi/virt/numamem", test_acpi_virt_tcg_numamem);

>          qtest_add_func("acpi/virt/memhp", test_acpi_virt_tcg_memhp);

>          qtest_add_func("acpi/virt/pxb", test_acpi_virt_tcg_pxb);

>          qtest_add_func("acpi/virt/oem-fields", test_acpi_oem_fields_virt);

> +        qtest_add_func("acpi/virt/viot", test_acpi_virt_viot);

>      }

>      ret = g_test_run();

>      boot_sector_cleanup(disk);

> --

> 2.33.0

>

>
Eric Auger Oct. 5, 2021, 7:40 p.m. UTC | #2
On 10/1/21 7:33 PM, Jean-Philippe Brucker wrote:
> Add two test cases for VIOT, one on the q35 machine and the other on

> virt. To test complex topologies the q35 test has two PCIe buses that

> bypass the IOMMU (and are therefore not described by VIOT), and two

> buses that are translated by virtio-iommu.

>

> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>

> ---

>  tests/qtest/bios-tables-test.c | 38 ++++++++++++++++++++++++++++++++++

>  1 file changed, 38 insertions(+)

>

> diff --git a/tests/qtest/bios-tables-test.c b/tests/qtest/bios-tables-test.c

> index 4f11d03055..b6cb383bd9 100644

> --- a/tests/qtest/bios-tables-test.c

> +++ b/tests/qtest/bios-tables-test.c

> @@ -1403,6 +1403,42 @@ static void test_acpi_virt_tcg(void)

>      free_test_data(&data);

>  }

>  

> +static void test_acpi_q35_viot(void)

> +{

> +    test_data data = {

> +        .machine = MACHINE_Q35,

> +        .variant = ".viot",

> +    };

> +

> +    /*

> +     * To keep things interesting, two buses bypass the IOMMU.

> +     * VIOT should only describes the other two buses.

> +     */

> +    test_acpi_one("-machine default_bus_bypass_iommu=on "

> +                  "-device virtio-iommu "

may be better to use virtio-iommu-pci?
> +                  "-device pxb-pcie,bus_nr=0x10,id=pcie.100,bus=pcie.0 "

> +                  "-device pxb-pcie,bus_nr=0x20,id=pcie.200,bus=pcie.0,bypass_iommu=on "

> +                  "-device pxb-pcie,bus_nr=0x30,id=pcie.300,bus=pcie.0",

> +                  &data);

> +    free_test_data(&data);

> +}

> +

> +static void test_acpi_virt_viot(void)

> +{

> +    test_data data = {

> +        .machine = "virt",

> +        .uefi_fl1 = "pc-bios/edk2-aarch64-code.fd",

> +        .uefi_fl2 = "pc-bios/edk2-arm-vars.fd",

> +        .cd = "tests/data/uefi-boot-images/bios-tables-test.aarch64.iso.qcow2",

> +        .ram_start = 0x40000000ULL,

> +        .scan_len = 128ULL * 1024 * 1024,

> +    };

> +

> +    test_acpi_one("-cpu cortex-a57 "

> +                  "-device virtio-iommu", &data);

> +    free_test_data(&data);

> +}

> +

>  static void test_oem_fields(test_data *data)

>  {

>      int i;

> @@ -1567,12 +1603,14 @@ int main(int argc, char *argv[])

>          if (strcmp(arch, "x86_64") == 0) {

>              qtest_add_func("acpi/microvm/pcie", test_acpi_microvm_pcie_tcg);

>          }

> +        qtest_add_func("acpi/q35/viot", test_acpi_q35_viot);

>      } else if (strcmp(arch, "aarch64") == 0) {

>          qtest_add_func("acpi/virt", test_acpi_virt_tcg);

>          qtest_add_func("acpi/virt/numamem", test_acpi_virt_tcg_numamem);

>          qtest_add_func("acpi/virt/memhp", test_acpi_virt_tcg_memhp);

>          qtest_add_func("acpi/virt/pxb", test_acpi_virt_tcg_pxb);

>          qtest_add_func("acpi/virt/oem-fields", test_acpi_oem_fields_virt);

> +        qtest_add_func("acpi/virt/viot", test_acpi_virt_viot);

>      }

>      ret = g_test_run();

>      boot_sector_cleanup(disk);

Besides
Reviewed-by: Eric Auger <eric.auger@redhat.com>

Eric
Igor Mammedov Oct. 6, 2021, 8:14 a.m. UTC | #3
On Fri,  1 Oct 2021 18:33:57 +0100
Jean-Philippe Brucker <jean-philippe@linaro.org> wrote:

> Add two test cases for VIOT, one on the q35 machine and the other on

> virt. To test complex topologies the q35 test has two PCIe buses that

> bypass the IOMMU (and are therefore not described by VIOT), and two

> buses that are translated by virtio-iommu.

> 

> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>


Reviewed-by: Igor Mammedov <imammedo@redhat.com>


> ---

>  tests/qtest/bios-tables-test.c | 38 ++++++++++++++++++++++++++++++++++

>  1 file changed, 38 insertions(+)

> 

> diff --git a/tests/qtest/bios-tables-test.c b/tests/qtest/bios-tables-test.c

> index 4f11d03055..b6cb383bd9 100644

> --- a/tests/qtest/bios-tables-test.c

> +++ b/tests/qtest/bios-tables-test.c

> @@ -1403,6 +1403,42 @@ static void test_acpi_virt_tcg(void)

>      free_test_data(&data);

>  }

>  

> +static void test_acpi_q35_viot(void)

> +{

> +    test_data data = {

> +        .machine = MACHINE_Q35,

> +        .variant = ".viot",

> +    };

> +

> +    /*

> +     * To keep things interesting, two buses bypass the IOMMU.

> +     * VIOT should only describes the other two buses.

> +     */

> +    test_acpi_one("-machine default_bus_bypass_iommu=on "

> +                  "-device virtio-iommu "

> +                  "-device pxb-pcie,bus_nr=0x10,id=pcie.100,bus=pcie.0 "

> +                  "-device pxb-pcie,bus_nr=0x20,id=pcie.200,bus=pcie.0,bypass_iommu=on "

> +                  "-device pxb-pcie,bus_nr=0x30,id=pcie.300,bus=pcie.0",

> +                  &data);

> +    free_test_data(&data);

> +}

> +

> +static void test_acpi_virt_viot(void)

> +{

> +    test_data data = {

> +        .machine = "virt",

> +        .uefi_fl1 = "pc-bios/edk2-aarch64-code.fd",

> +        .uefi_fl2 = "pc-bios/edk2-arm-vars.fd",

> +        .cd = "tests/data/uefi-boot-images/bios-tables-test.aarch64.iso.qcow2",

> +        .ram_start = 0x40000000ULL,

> +        .scan_len = 128ULL * 1024 * 1024,

> +    };

> +

> +    test_acpi_one("-cpu cortex-a57 "

> +                  "-device virtio-iommu", &data);

> +    free_test_data(&data);

> +}

> +

>  static void test_oem_fields(test_data *data)

>  {

>      int i;

> @@ -1567,12 +1603,14 @@ int main(int argc, char *argv[])

>          if (strcmp(arch, "x86_64") == 0) {

>              qtest_add_func("acpi/microvm/pcie", test_acpi_microvm_pcie_tcg);

>          }

> +        qtest_add_func("acpi/q35/viot", test_acpi_q35_viot);

>      } else if (strcmp(arch, "aarch64") == 0) {

>          qtest_add_func("acpi/virt", test_acpi_virt_tcg);

>          qtest_add_func("acpi/virt/numamem", test_acpi_virt_tcg_numamem);

>          qtest_add_func("acpi/virt/memhp", test_acpi_virt_tcg_memhp);

>          qtest_add_func("acpi/virt/pxb", test_acpi_virt_tcg_pxb);

>          qtest_add_func("acpi/virt/oem-fields", test_acpi_oem_fields_virt);

> +        qtest_add_func("acpi/virt/viot", test_acpi_virt_viot);

>      }

>      ret = g_test_run();

>      boot_sector_cleanup(disk);
Jean-Philippe Brucker Oct. 8, 2021, 3:27 p.m. UTC | #4
On Tue, Oct 05, 2021 at 03:57:17PM +0530, Ani Sinha wrote:
> 

> 

> On Fri, 1 Oct 2021, Jean-Philippe Brucker wrote:

> 

> > Add two test cases for VIOT, one on the q35 machine and the other on

> > virt. To test complex topologies the q35 test has two PCIe buses that

> > bypass the IOMMU (and are therefore not described by VIOT), and two

> > buses that are translated by virtio-iommu.

> >

> > Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>

> 

> This might be a stupid question but what about virtio-mmio and single mmio

> cases? I see none of your tables has nodes for those and here too you do

> not add test cases for it.


No it's a good question, there is no support for either at the moment.
virtio-mmio based virtio-iommu is relatively easy to implement, just
requires a little more machine support. QEMU doesn't support putting MMIO
endpoints behind an IOMMU at the moment, and implementing that is more
complicated.

To test the Linux VIOT driver I did both prototypes, but I don't have a
compelling reason or time to upstream them at the moment
https://jpbrucker.net/git/qemu/log/?h=virtio-iommu/acpi-2021-06-02

Thanks,
Jean
diff mbox series

Patch

diff --git a/tests/qtest/bios-tables-test.c b/tests/qtest/bios-tables-test.c
index 4f11d03055..b6cb383bd9 100644
--- a/tests/qtest/bios-tables-test.c
+++ b/tests/qtest/bios-tables-test.c
@@ -1403,6 +1403,42 @@  static void test_acpi_virt_tcg(void)
     free_test_data(&data);
 }
 
+static void test_acpi_q35_viot(void)
+{
+    test_data data = {
+        .machine = MACHINE_Q35,
+        .variant = ".viot",
+    };
+
+    /*
+     * To keep things interesting, two buses bypass the IOMMU.
+     * VIOT should only describes the other two buses.
+     */
+    test_acpi_one("-machine default_bus_bypass_iommu=on "
+                  "-device virtio-iommu "
+                  "-device pxb-pcie,bus_nr=0x10,id=pcie.100,bus=pcie.0 "
+                  "-device pxb-pcie,bus_nr=0x20,id=pcie.200,bus=pcie.0,bypass_iommu=on "
+                  "-device pxb-pcie,bus_nr=0x30,id=pcie.300,bus=pcie.0",
+                  &data);
+    free_test_data(&data);
+}
+
+static void test_acpi_virt_viot(void)
+{
+    test_data data = {
+        .machine = "virt",
+        .uefi_fl1 = "pc-bios/edk2-aarch64-code.fd",
+        .uefi_fl2 = "pc-bios/edk2-arm-vars.fd",
+        .cd = "tests/data/uefi-boot-images/bios-tables-test.aarch64.iso.qcow2",
+        .ram_start = 0x40000000ULL,
+        .scan_len = 128ULL * 1024 * 1024,
+    };
+
+    test_acpi_one("-cpu cortex-a57 "
+                  "-device virtio-iommu", &data);
+    free_test_data(&data);
+}
+
 static void test_oem_fields(test_data *data)
 {
     int i;
@@ -1567,12 +1603,14 @@  int main(int argc, char *argv[])
         if (strcmp(arch, "x86_64") == 0) {
             qtest_add_func("acpi/microvm/pcie", test_acpi_microvm_pcie_tcg);
         }
+        qtest_add_func("acpi/q35/viot", test_acpi_q35_viot);
     } else if (strcmp(arch, "aarch64") == 0) {
         qtest_add_func("acpi/virt", test_acpi_virt_tcg);
         qtest_add_func("acpi/virt/numamem", test_acpi_virt_tcg_numamem);
         qtest_add_func("acpi/virt/memhp", test_acpi_virt_tcg_memhp);
         qtest_add_func("acpi/virt/pxb", test_acpi_virt_tcg_pxb);
         qtest_add_func("acpi/virt/oem-fields", test_acpi_oem_fields_virt);
+        qtest_add_func("acpi/virt/viot", test_acpi_virt_viot);
     }
     ret = g_test_run();
     boot_sector_cleanup(disk);