| Message ID | 20211005032531.2251928-4-bjorn.andersson@linaro.org |
|---|---|
| State | Accepted |
| Commit | 4cc7c85cccc87e436a86b4281ddcd886eb0bf58f |
| Headers | show |
| Series | None | expand |
On 04-10-21, 20:25, Bjorn Andersson wrote: > Add a node for the ADC Thermal Monitor found in the PM8998 PMIC. This is > used to connect thermal zones with ADC channels. Reviewed-by: Vinod Koul <vkoul@kernel.org>
diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 6f5bb6b37ec2..d09f2954b6f9 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -84,6 +84,16 @@ adc-chan@6 { }; }; + pm8998_adc_tm: adc-tm@3400 { + compatible = "qcom,spmi-adc-tm-hc"; + reg = <0x3400>; + interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>, <0x6100>;
Add a node for the ADC Thermal Monitor found in the PM8998 PMIC. This is used to connect thermal zones with ADC channels. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- Changes since v2: - None arch/arm64/boot/dts/qcom/pm8998.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) -- 2.29.2