| Message ID | 20211007070900.456044-9-vkoul@kernel.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | None | expand |
On 07/10/2021 10:08, Vinod Koul wrote: > We need to configure the encoder for DSC configuration and calculate DSC > parameters for the given timing so this patch adds that support by > adding dpu_encoder_prep_dsc() which is invoked when DSC is enabled. > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > --- > Changes since > v1: > - Remove duplicate defines > - Update changelog > > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 139 +++++++++++++++++++- > 1 file changed, 138 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > index 0e9d3fa1544b..aac51c1bdf94 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > @@ -21,6 +21,7 @@ > #include "dpu_hw_intf.h" > #include "dpu_hw_ctl.h" > #include "dpu_hw_dspp.h" > +#include "dpu_hw_dsc.h" > #include "dpu_formats.h" > #include "dpu_encoder_phys.h" > #include "dpu_crtc.h" > @@ -136,6 +137,7 @@ enum dpu_enc_rc_states { > * @cur_slave: As above but for the slave encoder. > * @hw_pp: Handle to the pingpong blocks used for the display. No. > * pingpong blocks can be different than num_phys_encs. > + * @hw_dsc: Handle to the DSC blocks used for the display. > * @intfs_swapped: Whether or not the phys_enc interfaces have been swapped > * for partial update right-only cases, such as pingpong > * split where virtual pingpong does not generate IRQs > @@ -181,6 +183,7 @@ struct dpu_encoder_virt { > struct dpu_encoder_phys *cur_master; > struct dpu_encoder_phys *cur_slave; > struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC]; > + struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC]; > > bool intfs_swapped; > > @@ -977,7 +980,8 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc, > struct dpu_hw_blk *hw_ctl[MAX_CHANNELS_PER_ENC]; > struct dpu_hw_blk *hw_lm[MAX_CHANNELS_PER_ENC]; > struct dpu_hw_blk *hw_dspp[MAX_CHANNELS_PER_ENC] = { NULL }; > - int num_lm, num_ctl, num_pp; > + struct dpu_hw_blk *hw_dsc[MAX_CHANNELS_PER_ENC]; > + int num_lm, num_ctl, num_pp, num_dsc; > int i, j; > > if (!drm_enc) { > @@ -1035,6 +1039,13 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc, > dpu_enc->hw_pp[i] = i < num_pp ? to_dpu_hw_pingpong(hw_pp[i]) > : NULL; > > + if (priv->dsc) { > + num_dsc = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state, > + drm_enc->base.id, DPU_HW_BLK_DSC, hw_dsc, ARRAY_SIZE(hw_dsc)); > + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) > + dpu_enc->hw_dsc[i] = i < num_dsc ? to_dpu_hw_dsc(hw_dsc[i]) : NULL; > + } > + > cstate = to_dpu_crtc_state(drm_crtc->state); > > for (i = 0; i < num_lm; i++) { > @@ -1778,10 +1789,132 @@ static void dpu_encoder_vsync_event_work_handler(struct kthread_work *work) > nsecs_to_jiffies(ktime_to_ns(wakeup_time))); > } > > +static void > +dpu_encoder_dsc_pclk_param_calc(struct msm_display_dsc_config *dsc, u32 width) > +{ > + int slice_count, slice_per_intf; > + int bytes_in_slice, total_bytes_per_intf; > + > + if (!dsc || !dsc->drm->slice_width || !dsc->drm->slice_count) { > + DPU_ERROR("Invalid DSC/slices\n"); > + return; > + } > + > + slice_count = dsc->drm->slice_count; > + slice_per_intf = DIV_ROUND_UP(width, dsc->drm->slice_width); > + > + /* > + * If slice_count is greater than slice_per_intf then default to 1. > + * This can happen during partial update. > + */ > + if (slice_count > slice_per_intf) > + slice_count = 1; > + > + bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width * > + dsc->drm->bits_per_pixel, 8); > + total_bytes_per_intf = bytes_in_slice * slice_per_intf; > + > + dsc->eol_byte_num = total_bytes_per_intf % 3; > + dsc->pclk_per_line = DIV_ROUND_UP(total_bytes_per_intf, 3); > + dsc->bytes_in_slice = bytes_in_slice; > + dsc->bytes_per_pkt = bytes_in_slice * slice_count; > + dsc->pkt_per_line = slice_per_intf / slice_count; > +} > + > +static void > +dpu_encoder_dsc_initial_line_calc(struct msm_display_dsc_config *dsc, > + u32 enc_ip_width) > +{ > + int ssm_delay, total_pixels, soft_slice_per_enc; > + > + soft_slice_per_enc = enc_ip_width / dsc->drm->slice_width; > + > + /* > + * minimum number of initial line pixels is a sum of: > + * 1. sub-stream multiplexer delay (83 groups for 8bpc, > + * 91 for 10 bpc) * 3 > + * 2. for two soft slice cases, add extra sub-stream multiplexer * 3 > + * 3. the initial xmit delay > + * 4. total pipeline delay through the "lock step" of encoder (47) > + * 5. 6 additional pixels as the output of the rate buffer is > + * 48 bits wide > + */ > + ssm_delay = ((dsc->drm->bits_per_component < 10) ? 84 : 92); > + total_pixels = ssm_delay * 3 + dsc->drm->initial_xmit_delay + 47; > + if (soft_slice_per_enc > 1) > + total_pixels += (ssm_delay * 3); > + dsc->initial_lines = DIV_ROUND_UP(total_pixels, dsc->drm->slice_width); > +} > + > +static void dpu_encoder_dsc_pipe_cfg(struct dpu_hw_dsc *hw_dsc, > + struct dpu_hw_pingpong *hw_pp, > + struct msm_display_dsc_config *dsc, > + u32 common_mode) > +{ > + if (hw_dsc->ops.dsc_config) > + hw_dsc->ops.dsc_config(hw_dsc, dsc, common_mode); > + > + if (hw_dsc->ops.dsc_config_thresh) > + hw_dsc->ops.dsc_config_thresh(hw_dsc, dsc); > + > + if (hw_pp->ops.setup_dsc) > + hw_pp->ops.setup_dsc(hw_pp); > + > + if (hw_pp->ops.enable_dsc) > + hw_pp->ops.enable_dsc(hw_pp); > +} > + > +static void dpu_encoder_prep_dsc(struct dpu_encoder_virt *dpu_enc, > + struct msm_display_dsc_config *dsc) > +{ > + /* coding only for 2LM, 2enc, 1 dsc config */ > + struct dpu_encoder_phys *enc_master = dpu_enc->cur_master; > + struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC]; > + struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC]; > + int this_frame_slices; > + int intf_ip_w, enc_ip_w; > + int dsc_common_mode; > + int pic_width; > + int i; > + > + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) { > + hw_pp[i] = dpu_enc->hw_pp[i]; > + hw_dsc[i] = dpu_enc->hw_dsc[i]; > + > + if (!hw_pp[i] || !hw_dsc[i]) { > + DPU_ERROR_ENC(dpu_enc, "invalid params for DSC\n"); > + return; > + } > + } > + > + dsc_common_mode = 0; > + pic_width = dsc->drm->pic_width; > + > + dsc_common_mode = DSC_MODE_MULTIPLEX | DSC_MODE_SPLIT_PANEL; > + if (enc_master->intf_mode == INTF_MODE_VIDEO) > + dsc_common_mode |= DSC_MODE_VIDEO; > + > + this_frame_slices = pic_width / dsc->drm->slice_width; > + intf_ip_w = this_frame_slices * dsc->drm->slice_width; > + > + dpu_encoder_dsc_pclk_param_calc(dsc, intf_ip_w); > + > + /* > + * dsc merge case: when using 2 encoders for the same stream, > + * no. of slices need to be same on both the encoders. > + */ > + enc_ip_w = intf_ip_w / 2; > + dpu_encoder_dsc_initial_line_calc(dsc, enc_ip_w); > + > + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) > + dpu_encoder_dsc_pipe_cfg(hw_dsc[i], hw_pp[i], dsc, dsc_common_mode); > +} > + > void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc) > { > struct dpu_encoder_virt *dpu_enc; > struct dpu_encoder_phys *phys; > + struct msm_drm_private *priv; > bool needs_hw_reset = false; > unsigned int i; > > @@ -1809,6 +1942,10 @@ void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc) > dpu_encoder_helper_hw_reset(dpu_enc->phys_encs[i]); > } > } > + > + priv = drm_enc->dev->dev_private; > + if (priv->dsc) > + dpu_encoder_prep_dsc(dpu_enc, priv->dsc); Again, DP + DSI case would be broken here. We'd need to tie DSC config to the encoder itself rather than having a single global DSC config. > } > > void dpu_encoder_kickoff(struct drm_encoder *drm_enc) > -- With best wishes Dmitry
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c index 0e9d3fa1544b..aac51c1bdf94 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c @@ -21,6 +21,7 @@ #include "dpu_hw_intf.h" #include "dpu_hw_ctl.h" #include "dpu_hw_dspp.h" +#include "dpu_hw_dsc.h" #include "dpu_formats.h" #include "dpu_encoder_phys.h" #include "dpu_crtc.h" @@ -136,6 +137,7 @@ enum dpu_enc_rc_states { * @cur_slave: As above but for the slave encoder. * @hw_pp: Handle to the pingpong blocks used for the display. No. * pingpong blocks can be different than num_phys_encs. + * @hw_dsc: Handle to the DSC blocks used for the display. * @intfs_swapped: Whether or not the phys_enc interfaces have been swapped * for partial update right-only cases, such as pingpong * split where virtual pingpong does not generate IRQs @@ -181,6 +183,7 @@ struct dpu_encoder_virt { struct dpu_encoder_phys *cur_master; struct dpu_encoder_phys *cur_slave; struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC]; + struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC]; bool intfs_swapped; @@ -977,7 +980,8 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc, struct dpu_hw_blk *hw_ctl[MAX_CHANNELS_PER_ENC]; struct dpu_hw_blk *hw_lm[MAX_CHANNELS_PER_ENC]; struct dpu_hw_blk *hw_dspp[MAX_CHANNELS_PER_ENC] = { NULL }; - int num_lm, num_ctl, num_pp; + struct dpu_hw_blk *hw_dsc[MAX_CHANNELS_PER_ENC]; + int num_lm, num_ctl, num_pp, num_dsc; int i, j; if (!drm_enc) { @@ -1035,6 +1039,13 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc, dpu_enc->hw_pp[i] = i < num_pp ? to_dpu_hw_pingpong(hw_pp[i]) : NULL; + if (priv->dsc) { + num_dsc = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state, + drm_enc->base.id, DPU_HW_BLK_DSC, hw_dsc, ARRAY_SIZE(hw_dsc)); + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) + dpu_enc->hw_dsc[i] = i < num_dsc ? to_dpu_hw_dsc(hw_dsc[i]) : NULL; + } + cstate = to_dpu_crtc_state(drm_crtc->state); for (i = 0; i < num_lm; i++) { @@ -1778,10 +1789,132 @@ static void dpu_encoder_vsync_event_work_handler(struct kthread_work *work) nsecs_to_jiffies(ktime_to_ns(wakeup_time))); } +static void +dpu_encoder_dsc_pclk_param_calc(struct msm_display_dsc_config *dsc, u32 width) +{ + int slice_count, slice_per_intf; + int bytes_in_slice, total_bytes_per_intf; + + if (!dsc || !dsc->drm->slice_width || !dsc->drm->slice_count) { + DPU_ERROR("Invalid DSC/slices\n"); + return; + } + + slice_count = dsc->drm->slice_count; + slice_per_intf = DIV_ROUND_UP(width, dsc->drm->slice_width); + + /* + * If slice_count is greater than slice_per_intf then default to 1. + * This can happen during partial update. + */ + if (slice_count > slice_per_intf) + slice_count = 1; + + bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width * + dsc->drm->bits_per_pixel, 8); + total_bytes_per_intf = bytes_in_slice * slice_per_intf; + + dsc->eol_byte_num = total_bytes_per_intf % 3; + dsc->pclk_per_line = DIV_ROUND_UP(total_bytes_per_intf, 3); + dsc->bytes_in_slice = bytes_in_slice; + dsc->bytes_per_pkt = bytes_in_slice * slice_count; + dsc->pkt_per_line = slice_per_intf / slice_count; +} + +static void +dpu_encoder_dsc_initial_line_calc(struct msm_display_dsc_config *dsc, + u32 enc_ip_width) +{ + int ssm_delay, total_pixels, soft_slice_per_enc; + + soft_slice_per_enc = enc_ip_width / dsc->drm->slice_width; + + /* + * minimum number of initial line pixels is a sum of: + * 1. sub-stream multiplexer delay (83 groups for 8bpc, + * 91 for 10 bpc) * 3 + * 2. for two soft slice cases, add extra sub-stream multiplexer * 3 + * 3. the initial xmit delay + * 4. total pipeline delay through the "lock step" of encoder (47) + * 5. 6 additional pixels as the output of the rate buffer is + * 48 bits wide + */ + ssm_delay = ((dsc->drm->bits_per_component < 10) ? 84 : 92); + total_pixels = ssm_delay * 3 + dsc->drm->initial_xmit_delay + 47; + if (soft_slice_per_enc > 1) + total_pixels += (ssm_delay * 3); + dsc->initial_lines = DIV_ROUND_UP(total_pixels, dsc->drm->slice_width); +} + +static void dpu_encoder_dsc_pipe_cfg(struct dpu_hw_dsc *hw_dsc, + struct dpu_hw_pingpong *hw_pp, + struct msm_display_dsc_config *dsc, + u32 common_mode) +{ + if (hw_dsc->ops.dsc_config) + hw_dsc->ops.dsc_config(hw_dsc, dsc, common_mode); + + if (hw_dsc->ops.dsc_config_thresh) + hw_dsc->ops.dsc_config_thresh(hw_dsc, dsc); + + if (hw_pp->ops.setup_dsc) + hw_pp->ops.setup_dsc(hw_pp); + + if (hw_pp->ops.enable_dsc) + hw_pp->ops.enable_dsc(hw_pp); +} + +static void dpu_encoder_prep_dsc(struct dpu_encoder_virt *dpu_enc, + struct msm_display_dsc_config *dsc) +{ + /* coding only for 2LM, 2enc, 1 dsc config */ + struct dpu_encoder_phys *enc_master = dpu_enc->cur_master; + struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC]; + struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC]; + int this_frame_slices; + int intf_ip_w, enc_ip_w; + int dsc_common_mode; + int pic_width; + int i; + + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) { + hw_pp[i] = dpu_enc->hw_pp[i]; + hw_dsc[i] = dpu_enc->hw_dsc[i]; + + if (!hw_pp[i] || !hw_dsc[i]) { + DPU_ERROR_ENC(dpu_enc, "invalid params for DSC\n"); + return; + } + } + + dsc_common_mode = 0; + pic_width = dsc->drm->pic_width; + + dsc_common_mode = DSC_MODE_MULTIPLEX | DSC_MODE_SPLIT_PANEL; + if (enc_master->intf_mode == INTF_MODE_VIDEO) + dsc_common_mode |= DSC_MODE_VIDEO; + + this_frame_slices = pic_width / dsc->drm->slice_width; + intf_ip_w = this_frame_slices * dsc->drm->slice_width; + + dpu_encoder_dsc_pclk_param_calc(dsc, intf_ip_w); + + /* + * dsc merge case: when using 2 encoders for the same stream, + * no. of slices need to be same on both the encoders. + */ + enc_ip_w = intf_ip_w / 2; + dpu_encoder_dsc_initial_line_calc(dsc, enc_ip_w); + + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) + dpu_encoder_dsc_pipe_cfg(hw_dsc[i], hw_pp[i], dsc, dsc_common_mode); +} + void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc) { struct dpu_encoder_virt *dpu_enc; struct dpu_encoder_phys *phys; + struct msm_drm_private *priv; bool needs_hw_reset = false; unsigned int i; @@ -1809,6 +1942,10 @@ void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc) dpu_encoder_helper_hw_reset(dpu_enc->phys_encs[i]); } } + + priv = drm_enc->dev->dev_private; + if (priv->dsc) + dpu_encoder_prep_dsc(dpu_enc, priv->dsc); } void dpu_encoder_kickoff(struct drm_encoder *drm_enc)
We need to configure the encoder for DSC configuration and calculate DSC parameters for the given timing so this patch adds that support by adding dpu_encoder_prep_dsc() which is invoked when DSC is enabled. Signed-off-by: Vinod Koul <vkoul@kernel.org> --- Changes since v1: - Remove duplicate defines - Update changelog drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 139 +++++++++++++++++++- 1 file changed, 138 insertions(+), 1 deletion(-) -- 2.31.1