diff mbox series

dts: qcom: msm8996: Add device tree entries to support crypto engine

Message ID 20211011094822.1580122-1-vladimir.zapolskiy@linaro.org
State Accepted
Commit ef062eb675922d23650ee06808eac2ee08b26e5a
Headers show
Series dts: qcom: msm8996: Add device tree entries to support crypto engine | expand

Commit Message

Vladimir Zapolskiy Oct. 11, 2021, 9:48 a.m. UTC
The change adds description of Qualcomm crypto engine controller and
BAM associated with it. The change is inspired by commit 3e482859f1ef
("dts: qcom: sdm845: Add dt entries to support crypto engine.")

While performance of cryptographic algorithms executed on QCE is lower
than e.g. ones tinkered for ARM NEON, the offloaded execution would
make sense:

    # cryptsetup benchmark | grep aes
    aes-cbc        128b        71.0 MiB/s        71.9 MiB/s
    aes-cbc        256b        62.4 MiB/s        62.4 MiB/s
    aes-xts        256b        70.7 MiB/s        70.8 MiB/s
    aes-xts        512b        62.0 MiB/s        63.3 MiB/s

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>

Cc: Thara Gopinath <thara.gopinath@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

-- 
2.33.0
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 52df22ab3f6a..a03cbeb58246 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -705,6 +705,28 @@  tsens1: thermal-sensor@4ad000 {
 			#thermal-sensor-cells = <1>;
 		};
 
+		cryptobam: dma@644000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x00644000 0x24000>;
+			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_CE1_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely = <1>;
+		};
+
+		crypto: crypto@67a000 {
+			compatible = "qcom,crypto-v5.4";
+			reg = <0x0067a000 0x6000>;
+			clocks = <&gcc GCC_CE1_AHB_CLK>,
+				 <&gcc GCC_CE1_AXI_CLK>,
+				 <&gcc GCC_CE1_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 6>, <&cryptobam 7>;
+			dma-names = "rx", "tx";
+		};
+
 		tcsr_mutex_regs: syscon@740000 {
 			compatible = "syscon";
 			reg = <0x00740000 0x40000>;