diff mbox

[v2,3/3] ARM: dts: qs600: Add real regulators to sdcc

Message ID 1438071185-30192-1-git-send-email-srinivas.kandagatla@linaro.org
State Accepted
Commit baff39e6708e099261bac73a46377cffc9257388
Headers show

Commit Message

Srinivas Kandagatla July 28, 2015, 8:13 a.m. UTC
This patch adds real regulators to sdcc nodes.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 71512b3..34ccb26 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -67,6 +67,12 @@ 
 					bias-pull-down;
 				};
 
+				pm8921_l5: l5 {
+					regulator-min-microvolt = <2750000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
 				pm8921_l23: l23 {
 					regulator-min-microvolt = <1700000>;
 					regulator-max-microvolt = <1900000>;
@@ -140,19 +146,33 @@ 
 			status = "okay";
 		};
 
+		/* on board fixed 3.3v supply */
+		v3p3_fixed: v3p3 {
+			compatible = "regulator-fixed";
+			regulator-name = "PCIE V3P3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
 		amba {
 			/* eMMC */
 			sdcc1: sdcc@12400000 {
 				status = "okay";
+				vmmc-supply = <&pm8921_l5>;
+				vqmmc-supply = <&pm8921_s4>;
 			};
 
 			/* External micro SD card */
 			sdcc3: sdcc@12180000 {
 				status = "okay";
+				vmmc-supply = <&v3p3_fixed>;
 			};
 			/* WLAN */
 			sdcc4: sdcc@121c0000 {
 				status = "okay";
+				vmmc-supply = <&v3p3_fixed>;
+				vqmmc-supply = <&v3p3_fixed>;
 			};
 		};
 	};