| Message ID | 20211128181809.326736-8-hdegoede@redhat.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook | expand |
diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c index ff8419945618..aa643f533295 100644 --- a/drivers/power/supply/bq25890_charger.c +++ b/drivers/power/supply/bq25890_charger.c @@ -713,6 +713,17 @@ static int bq25890_hw_init(struct bq25890_device *bq) dev_dbg(bq->dev, "Reset failed %d\n", ret); return ret; } + } else { + /* + * Ensure charging is enabled, on some boards where the fw + * takes care of initalizition F_CHG_CFG is set to 0 before + * handing control over to the OS. + */ + ret = bq25890_field_write(bq, F_CHG_CFG, 1); + if (ret < 0) { + dev_dbg(bq->dev, "Enabling charging failed %d\n", ret); + return ret; + } } /* disable watchdog */
On boards where the "linux,skip-reset" boolean property is set we don't reset the charger; and on some boards where the fw takes care of initalizition F_CHG_CFG is set to 0 before handing control over to the OS. Explicitly set F_CHG_CFG to 1 on boards where we don't reset the charger, so that charging is always enabled on these boards, like it is always enabled on boards where we do reset the charger. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- drivers/power/supply/bq25890_charger.c | 11 +++++++++++ 1 file changed, 11 insertions(+)