diff mbox series

[v3,4/6] pinctrl: renesas: pinctrl-rzg2l: Add support to get/set pin config for GPIO port pins

Message ID 20211110224622.16022-5-prabhakar.mahadev-lad.rj@bp.renesas.com
State New
Headers show
Series RZ/G2L: pinctrl: Support to get/set drive-strength and output-impedance-ohms | expand

Commit Message

Prabhakar Mahadev Lad Nov. 10, 2021, 10:46 p.m. UTC 
Add support to get/set pin config for GPIO port pins.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v2->v3
* Introduced RZG2L_PIN_ID_TO_PORT_OFFSET
---
 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 32 +++++++++++++++++++++++++
 1 file changed, 32 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 984c19328efa..2b8aea40b95f 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -106,6 +106,7 @@ 
 #define PM_OUTPUT		0x2
 
 #define RZG2L_PIN_ID_TO_PORT(id)	((id) / RZG2L_PINS_PER_PORT)
+#define RZG2L_PIN_ID_TO_PORT_OFFSET(id)	(RZG2L_PIN_ID_TO_PORT(id) + 0x10)
 #define RZG2L_PIN_ID_TO_PIN(id)		((id) % RZG2L_PINS_PER_PORT)
 
 struct rzg2l_dedicated_configs {
@@ -424,6 +425,23 @@  static int rzg2l_dt_node_to_map(struct pinctrl_dev *pctldev,
 	return ret;
 }
 
+static int rzg2l_validate_gpio_pin(struct rzg2l_pinctrl *pctrl,
+				   u32 cfg, u32 port, u8 bit)
+{
+	u8 pincount = RZG2L_GPIO_PORT_GET_PINCNT(cfg);
+	u32 port_index = RZG2L_GPIO_PORT_GET_INDEX(cfg);
+	u32 data;
+
+	if (bit >= pincount || port >= pctrl->data->n_port_pins)
+		return -EINVAL;
+
+	data = pctrl->data->port_pin_configs[port];
+	if (port_index != RZG2L_GPIO_PORT_GET_INDEX(data))
+		return -EINVAL;
+
+	return 0;
+}
+
 static u32 rzg2l_read_pin_config(struct rzg2l_pinctrl *pctrl, u32 offset,
 				 u8 bit, u32 mask)
 {
@@ -476,6 +494,13 @@  static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
 		port_offset = RZG2L_SINGLE_PIN_GET_PORT_OFFSET(*pin_data);
 		cfg = RZG2L_SINGLE_PIN_GET_CFGS(*pin_data);
 		bit = RZG2L_SINGLE_PIN_GET_BIT(*pin_data);
+	} else {
+		cfg = RZG2L_GPIO_PORT_GET_CFGS(*pin_data);
+		port_offset = RZG2L_PIN_ID_TO_PORT_OFFSET(_pin);
+		bit = RZG2L_PIN_ID_TO_PIN(_pin);
+
+		if (rzg2l_validate_gpio_pin(pctrl, *pin_data, RZG2L_PIN_ID_TO_PORT(_pin), bit))
+			return -EINVAL;
 	}
 
 	switch (param) {
@@ -536,6 +561,13 @@  static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 		port_offset = RZG2L_SINGLE_PIN_GET_PORT_OFFSET(*pin_data);
 		cfg = RZG2L_SINGLE_PIN_GET_CFGS(*pin_data);
 		bit = RZG2L_SINGLE_PIN_GET_BIT(*pin_data);
+	} else {
+		cfg = RZG2L_GPIO_PORT_GET_CFGS(*pin_data);
+		port_offset = RZG2L_PIN_ID_TO_PORT_OFFSET(_pin);
+		bit = RZG2L_PIN_ID_TO_PIN(_pin);
+
+		if (rzg2l_validate_gpio_pin(pctrl, *pin_data, RZG2L_PIN_ID_TO_PORT(_pin), bit))
+			return -EINVAL;
 	}
 
 	for (i = 0; i < num_configs; i++) {