diff mbox series

[v2,1/5] tools/usbip: update protocol documentation

Message ID 20211128211202.GA37076@dell-precision-T3610
State Superseded
Headers show
Series [v2,1/5] tools/usbip: update protocol documentation | expand

Commit Message

Lars Gunnarsson Nov. 28, 2021, 9:12 p.m. UTC
This patch contains usbip protocol documentation updates for
the implementation changes in subsequent patches.

Signed-off-by: Lars Gunnarsson <gunnarsson.lars@gmail.com>
---
v1: New patch added in series.
v2: Update paragraph according to review comments

 Documentation/usb/usbip_protocol.rst | 61 ++++++++++++++++++++++++----
 1 file changed, 53 insertions(+), 8 deletions(-)

--
2.25.1
diff mbox series

Patch

diff --git a/Documentation/usb/usbip_protocol.rst b/Documentation/usb/usbip_protocol.rst
index 0b8541fda4d8..2d540fcc4b21 100644
--- a/Documentation/usb/usbip_protocol.rst
+++ b/Documentation/usb/usbip_protocol.rst
@@ -9,6 +9,11 @@  The USB/IP protocol follows a server/client architecture. The server exports the
 USB devices and the clients import them. The device driver for the exported
 USB device runs on the client machine.

+The server may choose to export any of its available USB devices based on their
+busid. These devices will remain exported until they are unplugged or unexported.
+Optionally, it is possible to persistently export the devices on a given bus by
+monitor when they are plugged in.
+
 The client may ask for the list of the exported USB devices. To get the list the
 client opens a TCP/IP connection to the server, and sends an OP_REQ_DEVLIST
 packet on top of the TCP/IP connection (so the actual OP_REQ_DEVLIST may be sent
@@ -31,12 +36,7 @@  TCP/IP connection is closed.

 Once the client knows the list of exported USB devices it may decide to use one
 of them. First the client opens a TCP/IP connection to the server and
-sends an OP_REQ_IMPORT packet. The server replies with OP_REP_IMPORT. If the
-import was successful the TCP/IP connection remains open and will be used
-to transfer the URB traffic between the client and the server. The client may
-send two types of packets: the USBIP_CMD_SUBMIT to submit an URB, and
-USBIP_CMD_UNLINK to unlink a previously submitted URB. The answers of the
-server may be USBIP_RET_SUBMIT and USBIP_RET_UNLINK respectively.
+sends an OP_REQ_IMPORT packet. The server replies with OP_REP_IMPORT.

 ::

@@ -50,6 +50,47 @@  server may be USBIP_RET_SUBMIT and USBIP_RET_UNLINK respectively.
           |                  OP_REP_IMPORT                  |
           | <---------------------------------------------- |
           |                                                 |
+
+The client may also request to poll for devices to become exported on a given
+busid, instead of immediately receive an error. If no device becomes exported
+within the chosen time, the server replies with timeout. The TCP/IP connection
+remains open and subsequent poll requests can be sent.
+
+::
+
+ virtual host controller                                 usb host
+      "client"                                           "server"
+  (imports USB devices)                             (exports USB devices)
+          |                                                 |
+          |                  OP_REQ_IMPORT                  |
+          | ----------------------------------------------> |
+          |                        .                        |
+          |                        :                        |
+          |                                                 |
+          |                  OP_REP_IMPORT                  |
+          | <---------------------------------------------- |
+          |                                                 |
+          |                  OP_REQ_IMPORT                  |
+          | ----------------------------------------------> |
+          |                        .                        |
+          |                        :                        |
+          |                                                 |
+          |                  OP_REP_IMPORT                  |
+          | <---------------------------------------------- |
+          |                        .                        |
+          |                        :                        |
+
+If the import was successful the TCP/IP connection remains open and will be used
+to transfer the URB traffic between the client and the server. The client may
+send two types of packets: the USBIP_CMD_SUBMIT to submit an URB, and
+USBIP_CMD_UNLINK to unlink a previously submitted URB. The answers of the
+server may be USBIP_RET_SUBMIT and USBIP_RET_UNLINK respectively.
+
+::
+
+ virtual host controller                                 usb host
+      "client"                                           "server"
+  (imports USB devices)                             (exports USB devices)
           |                                                 |
           |            USBIP_CMD_SUBMIT(seqnum = n)         |
           | ----------------------------------------------> |
@@ -132,8 +173,8 @@  byte (MSB) is stored at the lowest address.
 Protocol Version
 ================

-The documented USBIP version is v1.1.1. The binary representation of this
-version in message headers is 0x0111.
+The documented USBIP version is v1.1.2. The binary representation of this
+version in message headers is 0x0112.

 This is defined in tools/usb/usbip/configure.ac

@@ -243,6 +284,10 @@  OP_REQ_IMPORT:
 |           |        |            | A string closed with zero, the unused bytes       |
 |           |        |            | shall be filled with zeros.                       |
 +-----------+--------+------------+---------------------------------------------------+
+| 40        | 4      |            | poll timeout: instead of returning immediately if |
+|           |        |            | device is not available, wait until usb device    |
+|           |        |            | becomes exported or a timeout occurs.             |
++-----------+--------+------------+---------------------------------------------------+

 OP_REP_IMPORT:
 	Reply to import (attach) a remote USB device.