diff mbox series

mt76: connac: fix last_chan configuration in mt76_connac_mcu_rate_txpower_band

Message ID 05dfc592c246c47c61495380680342148c9de29d.1638264847.git.lorenzo@kernel.org
State New
Headers show
Series mt76: connac: fix last_chan configuration in mt76_connac_mcu_rate_txpower_band | expand

Commit Message

Lorenzo Bianconi Nov. 30, 2021, 9:36 a.m. UTC
last_ch configuration must not be dependent on the current configured band
but it is defined by hw capabilities since the fw always expects the
following order:
- 2GHz
- 5GHz
- 6GHz

Fixes: 9b2ea8eee42a1 ("mt76: connac: set 6G phymode in single-sku support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
index 8198f177d59b..e5e4af1b404c 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
@@ -1980,12 +1980,12 @@  mt76_connac_mcu_rate_txpower_band(struct mt76_phy *phy,
 	}
 	batch_size = DIV_ROUND_UP(n_chan, batch_len);
 
-	if (!phy->cap.has_5ghz)
-		last_ch = chan_list_2ghz[n_chan - 1];
-	else if (phy->cap.has_6ghz)
-		last_ch = chan_list_6ghz[n_chan - 1];
+	if (phy->cap.has_6ghz)
+		last_ch = chan_list_6ghz[ARRAY_SIZE(chan_list_6ghz) - 1];
+	else if (phy->cap.has_5ghz)
+		last_ch = chan_list_5ghz[ARRAY_SIZE(chan_list_5ghz) - 1];
 	else
-		last_ch = chan_list_5ghz[n_chan - 1];
+		last_ch = chan_list_2ghz[ARRAY_SIZE(chan_list_2ghz) - 1];
 
 	for (i = 0; i < batch_size; i++) {
 		struct mt76_connac_tx_power_limit_tlv tx_power_tlv = {};