diff mbox series

[v4,2/2] gpiolib: check the 'ngpios' property in core gpiolib code

Message ID 20211202134034.14048-2-brgl@bgdev.pl
State Accepted
Commit 9dbd1ab20509e85cd3fac9479a00c59e83c08196
Headers show
Series [v4,1/2] gpiolib: improve coding style for local variables | expand

Commit Message

Bartosz Golaszewski Dec. 2, 2021, 1:40 p.m. UTC 
Several drivers read the 'ngpios' device property on their own, but
since it's defined as a standard GPIO property in the device tree bindings
anyway, it's a good candidate for generalization. If the driver didn't
set its gc->ngpio, try to read the 'ngpios' property from the GPIO
device's firmware node before bailing out.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
v1 -> v2:
- use device_property_read_u32() instead of fwnode_property_read_u32()
- reverse the error check logic

v2 -> v3:
- don't shadow errors other than -ENODATA in device_property_read_u32()

v3 -> v4:
- also make sure we return -EINVAL when the device 'ngpios' property is
  set to 0 (thanks Andy!)

 drivers/gpio/gpiolib.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
diff mbox series

Patch

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index ede8b8a7aa18..bd9b8cb53476 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -599,6 +599,7 @@  int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
 	int base = gc->base;
 	unsigned int i;
 	int ret = 0;
+	u32 ngpios;
 
 	/*
 	 * First: allocate and populate the internal stat container, and
@@ -646,6 +647,26 @@  int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
 		goto err_free_dev_name;
 	}
 
+	/*
+	 * Try the device properties if the driver didn't supply the number
+	 * of GPIO lines.
+	 */
+	if (gc->ngpio == 0) {
+		ret = device_property_read_u32(&gdev->dev, "ngpios", &ngpios);
+		if (ret == -ENODATA)
+			/*
+			 * -ENODATA means that there is no property found and
+			 * we want to issue the error message to the user.
+			 * Besides that, we want to return different error code
+			 * to state that supplied value is not valid.
+			 * */
+			ngpios = 0;
+		else if (ret)
+			goto err_free_descs;
+
+		gc->ngpio = ngpios;
+	}
+
 	if (gc->ngpio == 0) {
 		chip_err(gc, "tried to insert a GPIO chip with zero lines\n");
 		ret = -EINVAL;