@@ -17,6 +17,13 @@
#include "smd-rpm.h"
#include "icc-rpm.h"
+/* QNOC QoS */
+#define QNOC_QOS_MCTL_LOWn_ADDR(n) (0x8 + (n * 0x1000))
+#define QNOC_QOS_MCTL_DFLT_PRIO_MASK 0x70
+#define QNOC_QOS_MCTL_DFLT_PRIO_SHIFT 4
+#define QNOC_QOS_MCTL_URGFWD_EN_MASK 0x8
+#define QNOC_QOS_MCTL_URGFWD_EN_SHIFT 3
+
/* BIMC QoS */
#define M_BKE_REG_BASE(n) (0x300 + (0x4000 * n))
#define M_BKE_EN_ADDR(n) (M_BKE_REG_BASE(n))
@@ -39,6 +46,27 @@
#define NOC_QOS_MODEn_ADDR(n) (0xc + (n * 0x1000))
#define NOC_QOS_MODEn_MASK 0x3
+static int qcom_icc_set_qnoc_qos(struct icc_node *src, u64 max_bw)
+{
+ struct icc_provider *provider = src->provider;
+ struct qcom_icc_provider *qp = to_qcom_provider(provider);
+ struct qcom_icc_node *qn = src->data;
+ struct qcom_icc_qos *qos = &qn->qos;
+ int rc;
+
+ rc = regmap_update_bits(qp->regmap,
+ qp->qos_offset + QNOC_QOS_MCTL_LOWn_ADDR(qos->qos_port),
+ QNOC_QOS_MCTL_DFLT_PRIO_MASK,
+ qos->areq_prio << QNOC_QOS_MCTL_DFLT_PRIO_SHIFT);
+ if (rc)
+ return rc;
+
+ return regmap_update_bits(qp->regmap,
+ qp->qos_offset + QNOC_QOS_MCTL_LOWn_ADDR(qos->qos_port),
+ QNOC_QOS_MCTL_URGFWD_EN_MASK,
+ !!qos->urg_fwd_en << QNOC_QOS_MCTL_URGFWD_EN_SHIFT);
+}
+
static int qcom_icc_bimc_set_qos_health(struct qcom_icc_provider *qp,
struct qcom_icc_qos *qos,
int regnum)
@@ -163,10 +191,14 @@ static int qcom_icc_qos_set(struct icc_node *node, u64 sum_bw)
dev_dbg(node->provider->dev, "Setting QoS for %s\n", qn->name);
- if (qp->type == QCOM_ICC_BIMC)
+ switch (qp->type) {
+ case QCOM_ICC_BIMC:
return qcom_icc_set_bimc_qos(node, sum_bw);
-
- return qcom_icc_set_noc_qos(node, sum_bw);
+ case QCOM_ICC_QNOC:
+ return qcom_icc_set_qnoc_qos(node, sum_bw);
+ default:
+ return qcom_icc_set_noc_qos(node, sum_bw);
+ }
}
static int qcom_icc_rpm_set(int mas_rpm_id, int slv_rpm_id, u64 sum_bw)
@@ -15,6 +15,7 @@
enum qcom_icc_type {
QCOM_ICC_NOC,
QCOM_ICC_BIMC,
+ QCOM_ICC_QNOC,
};
/**
@@ -43,6 +44,7 @@ struct qcom_icc_provider {
* @ap_owned: indicates if the node is owned by the AP or by the RPM
* @qos_mode: default qos mode for this node
* @qos_port: qos port number for finding qos registers of this node
+ * @urg_fwd_en: enable urgent forwarding
*/
struct qcom_icc_qos {
u32 areq_prio;
@@ -51,6 +53,7 @@ struct qcom_icc_qos {
bool ap_owned;
int qos_mode;
int qos_port;
+ bool urg_fwd_en;
};
/**
It adds QoS support for QNOC type device which can be found on QCM2290 platform. The downstream driver[1] includes support for priority, limiter, regulator and forwarding setup. As QCM2290 support only requires priority and forwarding configuration, limiter and regulator support are omitted for this initial submission. [1] https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/soc/qcom/msm_bus/msm_bus_qnoc_adhoc.c?h=kernel.lnx.4.19.r22-rel Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- drivers/interconnect/qcom/icc-rpm.c | 38 ++++++++++++++++++++++++++--- drivers/interconnect/qcom/icc-rpm.h | 3 +++ 2 files changed, 38 insertions(+), 3 deletions(-)