@@ -58,8 +58,7 @@ patternProperties:
Contains the chip-select IDs.
nand-ecc-engine:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description: |
A phandle on the hardware ECC engine if any. There are
basically three possibilities:
@@ -79,25 +78,24 @@ patternProperties:
description: Do not use any ECC correction.
nand-ecc-placement:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string
- - enum: [ oob, interleaved ]
+ $ref: /schemas/types.yaml#/definitions/string
description:
Location of the ECC bytes. This location is unknown by default
but can be explicitly set to "oob", if all ECC bytes are
known to be stored in the OOB area, or "interleaved" if ECC
bytes will be interleaved with regular data in the main area.
+ enum: [ oob, interleaved ]
nand-ecc-algo:
+ $ref: /schemas/types.yaml#/definitions/string
description:
Desired ECC algorithm.
- $ref: /schemas/types.yaml#/definitions/string
enum: [hamming, bch, rs]
nand-bus-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
Bus width to the NAND chip
- $ref: /schemas/types.yaml#/definitions/uint32
enum: [8, 16]
default: 8
@@ -113,15 +111,15 @@ patternProperties:
build a volatile BBT in RAM.
nand-ecc-strength:
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
Maximum number of bits that can be corrected per ECC step.
- $ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
nand-ecc-step-size:
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
Number of data bytes covered by a single ECC step.
- $ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
nand-ecc-maximize:
Harmonize the different properties in this file by: * dropping the non-necessary allOf's * always defining the keywords in the following order: - first: "type"/"$ref", - second: "description" (when relevant), - then the other generic keywords ("enum", "default", etc). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- .../devicetree/bindings/mtd/nand-controller.yaml | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-)