diff mbox series

[V6,4/5] scsi: storvsc: Add Isolation VM support for storvsc driver

Message ID 20211207075602.2452-5-ltykernel@gmail.com
State Superseded
Headers show
Series [V6,1/5] swiotlb: Add swiotlb bounce buffer remap function for HV IVM | expand

Commit Message

Tianyu Lan Dec. 7, 2021, 7:56 a.m. UTC
From: Tianyu Lan <Tianyu.Lan@microsoft.com>

In Isolation VM, all shared memory with host needs to mark visible
to host via hvcall. vmbus_establish_gpadl() has already done it for
storvsc rx/tx ring buffer. The page buffer used by vmbus_sendpacket_
mpb_desc() still needs to be handled. Use DMA API(scsi_dma_map/unmap)
to map these memory during sending/receiving packet and return swiotlb
bounce buffer dma address. In Isolation VM, swiotlb  bounce buffer is
marked to be visible to host and the swiotlb force mode is enabled.

Set device's dma min align mask to HV_HYP_PAGE_SIZE - 1 in order to
keep the original data offset in the bounce buffer.

Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
---
 drivers/hv/vmbus_drv.c     |  4 ++++
 drivers/scsi/storvsc_drv.c | 37 +++++++++++++++++++++----------------
 include/linux/hyperv.h     |  1 +
 3 files changed, 26 insertions(+), 16 deletions(-)

Comments

Tianyu Lan Dec. 9, 2021, 11:17 a.m. UTC | #1
On 12/9/2021 4:00 PM, Long Li wrote:
>> @@ -1848,21 +1851,22 @@ static int storvsc_queuecommand(struct Scsi_Host
>> *host, struct scsi_cmnd *scmnd)
>>   		payload->range.len = length;
>>   		payload->range.offset = offset_in_hvpg;
>>
>> +		sg_count = scsi_dma_map(scmnd);
>> +		if (sg_count < 0)
>> +			return SCSI_MLQUEUE_DEVICE_BUSY;
> Hi Tianyu,
> 
> This patch (and this patch series) unconditionally adds code for dealing with DMA addresses for all VMs, including non-isolation VMs.
> 
> Does this add performance penalty for VMs that don't require isolation?
> 

Hi Long:
	scsi_dma_map() in the traditional VM just save sg->offset to
sg->dma_address and no data copy because swiotlb bounce buffer code
doesn't work. The data copy only takes place in the Isolation VM and
swiotlb_force is set. So there is no additional overhead in the 
traditional VM.

Thanks.
diff mbox series

Patch

diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 392c1ac4f819..ae6ec503399a 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -33,6 +33,7 @@ 
 #include <linux/random.h>
 #include <linux/kernel.h>
 #include <linux/syscore_ops.h>
+#include <linux/dma-map-ops.h>
 #include <clocksource/hyperv_timer.h>
 #include "hyperv_vmbus.h"
 
@@ -2078,6 +2079,7 @@  struct hv_device *vmbus_device_create(const guid_t *type,
 	return child_device_obj;
 }
 
+static u64 vmbus_dma_mask = DMA_BIT_MASK(64);
 /*
  * vmbus_device_register - Register the child device
  */
@@ -2118,6 +2120,8 @@  int vmbus_device_register(struct hv_device *child_device_obj)
 	}
 	hv_debug_add_dev_dir(child_device_obj);
 
+	child_device_obj->device.dma_mask = &vmbus_dma_mask;
+	child_device_obj->device.dma_parms = &child_device_obj->dma_parms;
 	return 0;
 
 err_kset_unregister:
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 20595c0ba0ae..ae293600d799 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -21,6 +21,8 @@ 
 #include <linux/device.h>
 #include <linux/hyperv.h>
 #include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
+
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_host.h>
@@ -1336,6 +1338,7 @@  static void storvsc_on_channel_callback(void *context)
 					continue;
 				}
 				request = (struct storvsc_cmd_request *)scsi_cmd_priv(scmnd);
+				scsi_dma_unmap(scmnd);
 			}
 
 			storvsc_on_receive(stor_device, packet, request);
@@ -1749,7 +1752,6 @@  static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
 	struct hv_host_device *host_dev = shost_priv(host);
 	struct hv_device *dev = host_dev->dev;
 	struct storvsc_cmd_request *cmd_request = scsi_cmd_priv(scmnd);
-	int i;
 	struct scatterlist *sgl;
 	unsigned int sg_count;
 	struct vmscsi_request *vm_srb;
@@ -1831,10 +1833,11 @@  static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
 	payload_sz = sizeof(cmd_request->mpb);
 
 	if (sg_count) {
-		unsigned int hvpgoff, hvpfns_to_add;
 		unsigned long offset_in_hvpg = offset_in_hvpage(sgl->offset);
 		unsigned int hvpg_count = HVPFN_UP(offset_in_hvpg + length);
-		u64 hvpfn;
+		struct scatterlist *sg;
+		unsigned long hvpfn, hvpfns_to_add;
+		int j, i = 0;
 
 		if (hvpg_count > MAX_PAGE_BUFFER_COUNT) {
 
@@ -1848,21 +1851,22 @@  static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
 		payload->range.len = length;
 		payload->range.offset = offset_in_hvpg;
 
+		sg_count = scsi_dma_map(scmnd);
+		if (sg_count < 0)
+			return SCSI_MLQUEUE_DEVICE_BUSY;
 
-		for (i = 0; sgl != NULL; sgl = sg_next(sgl)) {
+		for_each_sg(sgl, sg, sg_count, j) {
 			/*
-			 * Init values for the current sgl entry. hvpgoff
-			 * and hvpfns_to_add are in units of Hyper-V size
-			 * pages. Handling the PAGE_SIZE != HV_HYP_PAGE_SIZE
-			 * case also handles values of sgl->offset that are
-			 * larger than PAGE_SIZE. Such offsets are handled
-			 * even on other than the first sgl entry, provided
-			 * they are a multiple of PAGE_SIZE.
+			 * Init values for the current sgl entry. hvpfns_to_add
+			 * is in units of Hyper-V size pages. Handling the
+			 * PAGE_SIZE != HV_HYP_PAGE_SIZE case also handles
+			 * values of sgl->offset that are larger than PAGE_SIZE.
+			 * Such offsets are handled even on other than the first
+			 * sgl entry, provided they are a multiple of PAGE_SIZE.
 			 */
-			hvpgoff = HVPFN_DOWN(sgl->offset);
-			hvpfn = page_to_hvpfn(sg_page(sgl)) + hvpgoff;
-			hvpfns_to_add =	HVPFN_UP(sgl->offset + sgl->length) -
-						hvpgoff;
+			hvpfn = HVPFN_DOWN(sg_dma_address(sg));
+			hvpfns_to_add = HVPFN_UP(sg_dma_address(sg) +
+						 sg_dma_len(sg)) - hvpfn;
 
 			/*
 			 * Fill the next portion of the PFN array with
@@ -1872,7 +1876,7 @@  static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
 			 * the PFN array is filled.
 			 */
 			while (hvpfns_to_add--)
-				payload->range.pfn_array[i++] =	hvpfn++;
+				payload->range.pfn_array[i++] = hvpfn++;
 		}
 	}
 
@@ -2016,6 +2020,7 @@  static int storvsc_probe(struct hv_device *device,
 	stor_device->vmscsi_size_delta = sizeof(struct vmscsi_win8_extension);
 	spin_lock_init(&stor_device->lock);
 	hv_set_drvdata(device, stor_device);
+	dma_set_min_align_mask(&device->device, HV_HYP_PAGE_SIZE - 1);
 
 	stor_device->port_number = host->host_no;
 	ret = storvsc_connect_to_vsp(device, storvsc_ringbuffer_size, is_fc);
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 1f037e114dc8..74f5e92f91a0 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -1261,6 +1261,7 @@  struct hv_device {
 
 	struct vmbus_channel *channel;
 	struct kset	     *channels_kset;
+	struct device_dma_parameters dma_parms;
 
 	/* place holder to keep track of the dir for hv device in debugfs */
 	struct dentry *debug_dir;