diff mbox series

[v2,10/11] riscv: dts: sifive: fu540-c000: Drop bogus soc node compatible values

Message ID d91be26a619dbd0aec59b263d25b4db4205a6db7.1639660956.git.geert@linux-m68k.org
State Accepted
Commit 8fc6e62a549c61abd594e8435017a31cfca43475
Headers show
Series [v2,01/11] riscv: dts: canaan: Fix SPI FLASH node names | expand

Commit Message

Geert Uytterhoeven Dec. 16, 2021, 1:37 p.m. UTC
"make dtbs_check":

    arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml: soc: $nodename:0: '/' was expected
    	From schema: Documentation/devicetree/bindings/riscv/sifive.yaml
    arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml: soc: compatible: 'oneOf' conditional failed, one must be fixed:
    	'sifive,fu540-c000' is not one of ['sifive,hifive-unleashed-a00']
    	'sifive,fu540-c000' is not one of ['sifive,hifive-unmatched-a00']
    	'sifive,fu540-c000' was expected
    	'sifive,fu740-c000' was expected
    	'sifive,fu540' was expected
    	'sifive,fu740' was expected
    	From schema: Documentation/devicetree/bindings/riscv/sifive.yaml

This happens because the "soc" subnode declares compatibility with
"sifive,fu540-c000" and "sifive,fu540", while these are only intended
for the root node.

Fix this by removing the bogus compatible values from the "soc" node.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
v2:
  - Add Reviewed-by.
---
 arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
index e2efcf08210926f8..b1250c16816f5c9d 100644
--- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -137,7 +137,7 @@  cpu4_intc: interrupt-controller {
 	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
-		compatible = "sifive,fu540-c000", "sifive,fu540", "simple-bus";
+		compatible = "simple-bus";
 		ranges;
 		plic0: interrupt-controller@c000000 {
 			#interrupt-cells = <1>;