diff mbox series

[V3,1/2] mmc:sdhci-pci-o2micro:Improve card input timing at SDR104/HS200 mode

Message ID 20211216060824.357-1-fred.ai@bayhubtech.com
State Superseded
Headers show
Series [V3,1/2] mmc:sdhci-pci-o2micro:Improve card input timing at SDR104/HS200 mode | expand

Commit Message

Fred Ai(WH) Dec. 16, 2021, 6:08 a.m. UTC 
From: Fred Ai <fred.ai@bayhubtech.com>

Card input timing is margin, need to adjust the hold timing of card input.

Signed-off-by: Fred Ai <fred.ai@bayhubtech.com>
---
Change in V3:
1.Select suit DLL phase's output clock as SD interface clock at SDR104/HS200 mode.
2.Deselect DLL output phase as SD interface clock before next card initialization.
---
 drivers/mmc/host/sdhci-pci-o2micro.c | 56 +++++++++++++++++++++++-----
 1 file changed, 47 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index f045c1ee4667..f55602609f8c 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -43,11 +43,15 @@ 
 #define O2_SD_CAP_REG0		0x334
 #define O2_SD_UHS1_CAP_SETTING	0x33C
 #define O2_SD_DELAY_CTRL	0x350
+#define O2_SD_OUTPUT_CLK_SOURCE_SWITCH	0x354
 #define O2_SD_UHS2_L1_CTRL	0x35C
 #define O2_SD_FUNC_REG3		0x3E0
 #define O2_SD_FUNC_REG4		0x3E4
 #define O2_SD_LED_ENABLE	BIT(6)
 #define O2_SD_FREG0_LEDOFF	BIT(13)
+#define O2_SD_SEL_DLL		BIT(16)
+#define O2_SD_FIX_PHASE		(BIT(23) | BIT(20))
+#define O2_SD_PHASE_MASK	GENMASK(23, 20)
 #define O2_SD_FREG4_ENABLE_CLK_SET	BIT(22)
 
 #define O2_SD_VENDOR_SETTING	0x110
@@ -301,9 +305,13 @@  static int sdhci_o2_dll_recovery(struct sdhci_host *host)
 static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
+	struct sdhci_pci_slot *slot = sdhci_priv(host);
+	struct sdhci_pci_chip *chip = slot->chip;
 	int current_bus_width = 0;
 	u32 scratch32 = 0;
 	u16 scratch = 0;
+	u8  scratch_8 = 0;
+	u32 reg_val;
 
 	/*
 	 * This handler only implements the eMMC tuning that is specific to
@@ -322,6 +330,32 @@  static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	scratch |= O2_SD_PWR_FORCE_L0;
 	sdhci_writew(host, scratch, O2_SD_MISC_CTRL);
 
+	/* Stop clk */
+	reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+	reg_val &= ~SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL);
+
+	/* UnLock WP */
+	pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
+	scratch_8 &= 0x7f;
+	pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
+
+	/* Set pcr 0x354[16] to choose dll clock, and set the default phase */
+	pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &reg_val);
+	reg_val &= ~(O2_SD_SEL_DLL | O2_SD_PHASE_MASK);
+	reg_val |= (O2_SD_SEL_DLL | O2_SD_FIX_PHASE);
+	pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, reg_val);
+
+	/* Lock WP */
+	pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
+	scratch_8 |= 0x80;
+	pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
+
+	/* Start clk */
+	reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+	reg_val |= SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL);
+
 	/* wait DLL lock, timeout value 5ms */
 	if (readx_poll_timeout(sdhci_o2_pll_dll_wdt_control, host,
 		scratch32, (scratch32 & O2_DLL_LOCK_STATUS), 1, 5000))
@@ -533,22 +567,26 @@  static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
 	if (clock == 0)
 		return;
 
-	if ((host->timing == MMC_TIMING_UHS_SDR104) && (clock == 200000000)) {
-		pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
-
-		scratch &= 0x7f;
-		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+	/* UnLock WP */
+	pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
+	scratch &= 0x7f;
+	pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
 
+	if ((host->timing == MMC_TIMING_UHS_SDR104) && (clock == 200000000)) {
 		pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32);
 
 		if ((scratch_32 & 0xFFFF0000) != 0x2c280000)
 			o2_pci_set_baseclk(chip, 0x2c280000);
+	}
 
-		pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
+	pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &scratch_32);
+	scratch_32 &= ~(O2_SD_SEL_DLL | O2_SD_PHASE_MASK);
+	pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, scratch_32);
 
-		scratch |= 0x80;
-		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
-	}
+    /* Lock WP */
+	pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
+	scratch |= 0x80;
+	pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
 
 	clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
 	sdhci_o2_enable_clk(host, clk);