| Message ID | 20211220064829.17557-2-quic_wgong@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | ath11k: add handler for board-2.bin without variant and read SMBIOS | expand |
Wen Gong <quic_wgong@quicinc.com> writes: > Sometimes it has a variant value which read from DT or SMBIOS by > ath11k, and meanwhile it does not have the matched board name in > board-2.bin, then it will failed at boot up phase. > > Add fallback board name which removed variant value and search again > in board-2.bin when failed with variant and try to load the board > data again to increase boot up success rate. > > dmesg log after this patch: > [169547.248472] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test' > [169547.248565] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 > [169547.248568] ath11k_pci 0000:05:00.0: board name > [169547.248570] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 > [169547.248571] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, > [169547.248572] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor > [169547.248574] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- > [169547.248575] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- > [169547.248576] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo > [169547.248577] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 > [169547.248578] ath11k_pci 0000:05:00.0: board name > [169547.248579] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 > [169547.248581] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, > [169547.248582] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor > [169547.248583] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- > [169547.248584] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- > [169547.248585] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo > [169547.248587] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 > [169547.248588] ath11k_pci 0000:05:00.0: board name > [169547.248589] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 > [169547.248590] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, > [169547.248591] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor > [169547.248592] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- > [169547.248594] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- > [169547.248595] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 31 38 2c 71 6d 69 2d 62 chip-id=18,qmi-b > [169547.248596] ath11k_pci 0000:05:00.0: 00000060: 6f 61 72 64 2d 69 64 3d 32 36 36 oard-id=266 > [169547.248597] ath11k_pci 0000:05:00.0: failed to fetch board data for bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test from ath11k/WCN6855/hw2.0/board-2.bin > [169547.248476] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' > [169547.248634] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 > [169547.248636] ath11k_pci 0000:05:00.0: board name > [169547.248637] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 > [169547.248638] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, > [169547.248639] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor > [169547.248641] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- > [169547.248642] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- > [169547.248643] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo > [169547.248645] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 > [169547.248646] ath11k_pci 0000:05:00.0: boot found match for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' > [169547.248647] ath11k_pci 0000:05:00.0: boot found board data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' > [169547.248649] ath11k_pci 0000:05:00.0: using board api 2 > > Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 > > Signed-off-by: Wen Gong <quic_wgong@quicinc.com> [...] > @@ -722,7 +734,7 @@ static int ath11k_core_fetch_board_data_api_n(struct ath11k_base *ab, > > out: > if (!bd->data || !bd->len) { > - ath11k_err(ab, > + ath11k_dbg(ab, ATH11K_DBG_BOOT, > "failed to fetch board data for %s from %s\n", > boardname, filepath); > ret = -ENODATA; This error message was useful as it made easy to find out what board data file we are missing. An example: https://bugzilla.kernel.org/show_bug.cgi?id=215586#c0 So I'm worried it will become more difficult if the message is changed to a debug message. But I don't know what's a good solution either, we shouldn't print an error message while we are searching for the board file and print it only after we could not find any. One idea I have was to print every boardname we tried to find or just print the first boardname, but don't know really what's the best. But to summarise, we need to think carefully how to handle the missing board file case. It's very common for users that a board file is missing in board-2.bin so the error message should be informative enough.
On 3/10/2022 4:00 PM, Kalle Valo wrote: > Wen Gong <quic_wgong@quicinc.com> writes: > > ... >> @@ -722,7 +734,7 @@ static int ath11k_core_fetch_board_data_api_n(struct ath11k_base *ab, >> >> out: >> if (!bd->data || !bd->len) { >> - ath11k_err(ab, >> + ath11k_dbg(ab, ATH11K_DBG_BOOT, >> "failed to fetch board data for %s from %s\n", >> boardname, filepath); >> ret = -ENODATA; > This error message was useful as it made easy to find out what board > data file we are missing. An example: > > https://bugzilla.kernel.org/show_bug.cgi?id=215586#c0 > > So I'm worried it will become more difficult if the message is changed > to a debug message. But I don't know what's a good solution either, we > shouldn't print an error message while we are searching for the board > file and print it only after we could not find any. One idea I have was > to print every boardname we tried to find or just print the first > boardname, but don't know really what's the best. > > But to summarise, we need to think carefully how to handle the missing > board file case. It's very common for users that a board file is missing > in board-2.bin so the error message should be informative enough. Yes, I think we can change to print the error message after we could not find any, I will change it in next version patch.
diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c index 606e867c36ec..641c133563ab 100644 --- a/drivers/net/wireless/ath/ath11k/core.c +++ b/drivers/net/wireless/ath/ath11k/core.c @@ -483,13 +483,13 @@ int ath11k_core_check_dt(struct ath11k_base *ab) return 0; } -static int ath11k_core_create_board_name(struct ath11k_base *ab, char *name, - size_t name_len) +static int __ath11k_core_create_board_name(struct ath11k_base *ab, char *name, + size_t name_len, bool with_variant) { /* strlen(',variant=') + strlen(ab->qmi.target.bdf_ext) */ char variant[9 + ATH11K_QMI_BDF_EXT_STR_LENGTH] = { 0 }; - if (ab->qmi.target.bdf_ext[0] != '\0') + if (with_variant && ab->qmi.target.bdf_ext[0] != '\0') scnprintf(variant, sizeof(variant), ",variant=%s", ab->qmi.target.bdf_ext); @@ -519,6 +519,18 @@ static int ath11k_core_create_board_name(struct ath11k_base *ab, char *name, return 0; } +static int ath11k_core_create_board_name(struct ath11k_base *ab, char *name, + size_t name_len) +{ + return __ath11k_core_create_board_name(ab, name, name_len, true); +} + +static int ath11k_core_create_fallback_board_name(struct ath11k_base *ab, char *name, + size_t name_len) +{ + return __ath11k_core_create_board_name(ab, name, name_len, false); +} + const struct firmware *ath11k_core_firmware_request(struct ath11k_base *ab, const char *file) { @@ -722,7 +734,7 @@ static int ath11k_core_fetch_board_data_api_n(struct ath11k_base *ab, out: if (!bd->data || !bd->len) { - ath11k_err(ab, + ath11k_dbg(ab, ATH11K_DBG_BOOT, "failed to fetch board data for %s from %s\n", boardname, filepath); ret = -ENODATA; @@ -752,10 +764,10 @@ static int ath11k_core_fetch_board_data_api_1(struct ath11k_base *ab, #define BOARD_NAME_SIZE 200 int ath11k_core_fetch_bdf(struct ath11k_base *ab, struct ath11k_board_data *bd) { - char boardname[BOARD_NAME_SIZE]; + char boardname[BOARD_NAME_SIZE], fallback_boardname[BOARD_NAME_SIZE]; int ret; - ret = ath11k_core_create_board_name(ab, boardname, BOARD_NAME_SIZE); + ret = ath11k_core_create_board_name(ab, boardname, sizeof(boardname)); if (ret) { ath11k_err(ab, "failed to create board name: %d", ret); return ret; @@ -766,6 +778,17 @@ int ath11k_core_fetch_bdf(struct ath11k_base *ab, struct ath11k_board_data *bd) if (!ret) goto success; + ret = ath11k_core_create_fallback_board_name(ab, fallback_boardname, + sizeof(fallback_boardname)); + if (ret) { + ath11k_err(ab, "failed to create fallback board name: %d", ret); + return ret; + } + + ret = ath11k_core_fetch_board_data_api_n(ab, bd, fallback_boardname); + if (!ret) + goto success; + ab->bd_api = 1; ret = ath11k_core_fetch_board_data_api_1(ab, bd); if (ret) {
Sometimes it has a variant value which read from DT or SMBIOS by ath11k, and meanwhile it does not have the matched board name in board-2.bin, then it will failed at boot up phase. Add fallback board name which removed variant value and search again in board-2.bin when failed with variant and try to load the board data again to increase boot up success rate. dmesg log after this patch: [169547.248472] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test' [169547.248565] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248568] ath11k_pci 0000:05:00.0: board name [169547.248570] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248571] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248572] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248574] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248575] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248576] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248577] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248578] ath11k_pci 0000:05:00.0: board name [169547.248579] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248581] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248582] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248583] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248584] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248585] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248587] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [169547.248588] ath11k_pci 0000:05:00.0: board name [169547.248589] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248590] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248591] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248592] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248594] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248595] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 31 38 2c 71 6d 69 2d 62 chip-id=18,qmi-b [169547.248596] ath11k_pci 0000:05:00.0: 00000060: 6f 61 72 64 2d 69 64 3d 32 36 36 oard-id=266 [169547.248597] ath11k_pci 0000:05:00.0: failed to fetch board data for bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test from ath11k/WCN6855/hw2.0/board-2.bin [169547.248476] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248634] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248636] ath11k_pci 0000:05:00.0: board name [169547.248637] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248638] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248639] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248641] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248642] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248643] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248645] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248646] ath11k_pci 0000:05:00.0: boot found match for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248647] ath11k_pci 0000:05:00.0: boot found board data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248649] ath11k_pci 0000:05:00.0: using board api 2 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> --- drivers/net/wireless/ath/ath11k/core.c | 35 +++++++++++++++++++++----- 1 file changed, 29 insertions(+), 6 deletions(-)