diff mbox series

[v2,8/8] i2c: i801: convert to use common P2SB accessor

Message ID 20211221173945.53674-8-andriy.shevchenko@linux.intel.com
State Superseded
Headers show
Series [v2,1/8] PCI: Introduce pci_bus_*() printing macros when device is not available | expand

Commit Message

Andy Shevchenko Dec. 21, 2021, 5:39 p.m. UTC
Since we have a common P2SB accessor in tree we may use it instead of
open coded variants.

Replace custom code by pci_p2sb_bar() call.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/Kconfig        |  1 +
 drivers/i2c/busses/i2c-i801.c     | 39 +++++++------------------------
 drivers/platform/x86/intel/p2sb.c |  6 +++++
 3 files changed, 16 insertions(+), 30 deletions(-)
diff mbox series

Patch

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 42da31c1ab70..286f3b14712b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -101,6 +101,7 @@  config I2C_HIX5HD2
 config I2C_I801
 	tristate "Intel 82801 (ICH/PCH)"
 	depends on PCI
+	select P2SB if X86
 	select CHECK_SIGNATURE if X86 && DMI
 	select I2C_SMBUS
 	help
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 7428cc6af5cc..950a9b444adf 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -110,6 +110,7 @@ 
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/itco_wdt.h>
+#include <linux/platform_data/x86/p2sb.h>
 #include <linux/pm_runtime.h>
 #include <linux/mutex.h>
 
@@ -139,7 +140,6 @@ 
 #define TCOBASE		0x050
 #define TCOCTL		0x054
 
-#define SBREG_BAR		0x10
 #define SBREG_SMBCTRL		0xc6000c
 #define SBREG_SMBCTRL_DNV	0xcf000c
 
@@ -1474,45 +1474,24 @@  i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev,
 		.version = 4,
 	};
 	struct resource *res;
-	unsigned int devfn;
-	u64 base64_addr;
-	u32 base_addr;
-	u8 hidden;
+	int ret;
 
 	/*
 	 * We must access the NO_REBOOT bit over the Primary to Sideband
-	 * bridge (P2SB). The BIOS prevents the P2SB device from being
-	 * enumerated by the PCI subsystem, so we need to unhide/hide it
-	 * to lookup the P2SB BAR.
+	 * (P2SB) bridge.
 	 */
-	pci_lock_rescan_remove();
-
-	devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 1);
-
-	/* Unhide the P2SB device, if it is hidden */
-	pci_bus_read_config_byte(pci_dev->bus, devfn, 0xe1, &hidden);
-	if (hidden)
-		pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, 0x0);
-
-	pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR, &base_addr);
-	base64_addr = base_addr & 0xfffffff0;
-
-	pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR + 0x4, &base_addr);
-	base64_addr |= (u64)base_addr << 32;
-
-	/* Hide the P2SB device, if it was hidden before */
-	if (hidden)
-		pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, hidden);
-	pci_unlock_rescan_remove();
 
 	res = &tco_res[1];
+	ret = p2sb_bar(pci_dev->bus, 0, res);
+	if (ret)
+		return ERR_PTR(ret);
+
 	if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS)
-		res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL_DNV;
+		res->start += SBREG_SMBCTRL_DNV;
 	else
-		res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL;
+		res->start += SBREG_SMBCTRL;
 
 	res->end = res->start + 3;
-	res->flags = IORESOURCE_MEM;
 
 	return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
 					tco_res, 2, &pldata, sizeof(pldata));
diff --git a/drivers/platform/x86/intel/p2sb.c b/drivers/platform/x86/intel/p2sb.c
index b47517572310..916318a7310b 100644
--- a/drivers/platform/x86/intel/p2sb.c
+++ b/drivers/platform/x86/intel/p2sb.c
@@ -24,6 +24,12 @@ 
 
 static const struct x86_cpu_id p2sb_cpu_ids[] = {
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT,	PCI_DEVFN(13, 0)),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_D,	PCI_DEVFN(31, 1)),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_D,	PCI_DEVFN(31, 1)),
+	X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE,		PCI_DEVFN(31, 1)),
+	X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE_L,		PCI_DEVFN(31, 1)),
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE,		PCI_DEVFN(31, 1)),
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_L,		PCI_DEVFN(31, 1)),
 	{}
 };