diff mbox series

[1/2] dt-bindings: leds: Document rfkill* trigger

Message ID 20211217170715.2893923-1-thierry.reding@gmail.com
State New
Headers show
Series [1/2] dt-bindings: leds: Document rfkill* trigger | expand

Commit Message

Thierry Reding Dec. 17, 2021, 5:07 p.m. UTC 
From: Thierry Reding <treding@nvidia.com>

LEDs can use rfkill events as a trigger source, so document these in the
device tree bindings.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 .../devicetree/bindings/leds/common.yaml        | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

Comments

Rob Herring (Arm) Dec. 21, 2021, 7:39 p.m. UTC | #1 
On Fri, 17 Dec 2021 18:07:14 +0100, Thierry Reding wrote:
> From: Thierry Reding <treding@nvidia.com>
> 
> LEDs can use rfkill events as a trigger source, so document these in the
> device tree bindings.
> 
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
>  .../devicetree/bindings/leds/common.yaml        | 17 +++++++++--------
>  1 file changed, 9 insertions(+), 8 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index 697102707703..f686907b4907 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -79,24 +79,25 @@  properties:
       the LED.
     $ref: /schemas/types.yaml#/definitions/string
 
-    enum:
+    oneOf:
         # LED will act as a back-light, controlled by the framebuffer system
-      - backlight
+      - const: backlight
         # LED will turn on (but for leds-gpio see "default-state" property in
         # Documentation/devicetree/bindings/leds/leds-gpio.yaml)
-      - default-on
+      - const: default-on
         # LED "double" flashes at a load average based rate
-      - heartbeat
+      - const: heartbeat
         # LED indicates disk activity
-      - disk-activity
+      - const: disk-activity
         # LED indicates IDE disk activity (deprecated), in new implementations
         # use "disk-activity"
-      - ide-disk
+      - const: ide-disk
         # LED flashes at a fixed, configurable rate
-      - timer
+      - const: timer
         # LED alters the brightness for the specified duration with one software
         # timer (requires "led-pattern" property)
-      - pattern
+      - const: pattern
+      - pattern: "^rfkill[0-9]+$"
 
   led-pattern:
     description: |