diff mbox

[V3,6/6] ARM: exynos: Enable l2 configuration through device tree

Message ID 1321954532-18724-7-git-send-email-amit.kachhap@linaro.org
State New
Headers show

Commit Message

Amit Daniel Kachhap Nov. 22, 2011, 9:35 a.m. UTC 
This patch enables calling generic l2 setup functions if device tree is used.

Signed-off-by: Amit Daniel Kachhap <amit.kachhap@linaro.org>
---
 arch/arm/mach-exynos/cpu.c |   12 ++++++++++--
 1 files changed, 10 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/mach-exynos/cpu.c b/arch/arm/mach-exynos/cpu.c
index 252e346..b62a90f 100644
--- a/arch/arm/mach-exynos/cpu.c
+++ b/arch/arm/mach-exynos/cpu.c
@@ -37,6 +37,9 @@ 
 #include <mach/regs-pmu.h>
 #include <mach/pmu.h>
 
+#define L2_AUX_VAL 0x7C470001
+#define L2_AUX_MASK 0xC200ffff
+
 unsigned int gic_bank_offset __read_mostly;
 
 extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
@@ -299,6 +302,7 @@  core_initcall(exynos4_core_init);
 #ifdef CONFIG_CACHE_L2X0
 static int __init exynos4_l2x0_cache_init(void)
 {
+#ifndef CONFIG_OF
 	if (!(__raw_readl(S5P_VA_L2CC + L2X0_CTRL) & 0x1)) {
 		l2x0_saved_regs.phy_base = EXYNOS4_PA_L2CC;
 		/* TAG, Data Latency Control: 2 cycles */
@@ -332,8 +336,12 @@  static int __init exynos4_l2x0_cache_init(void)
 		clean_dcache_area(&l2x0_saved_regs, sizeof(struct l2x0_regs));
 	}
 
-	l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);
-
+	l2x0_init(S5P_VA_L2CC, L2_AUX_VAL, L2_AUX_MASK);
+#else
+	l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK);
+	l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
+	clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
+#endif
 	return 0;
 }