diff mbox series

[v5,05/14] media: cadence: csi2rx: Soft reset the streams before starting capture

Message ID 20211223191615.17803-6-p.yadav@ti.com
State Superseded
Headers show
Series CSI2RX support on J721E | expand

Commit Message

Pratyush Yadav Dec. 23, 2021, 7:16 p.m. UTC
This resets the stream state machines and FIFOs, giving them a clean
slate. On J721E if the streams are not reset before starting the
capture, the captured frame gets wrapped around vertically on every run
after the first.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

---

Changes in v5:
- Make i unsigned.
- Add Laurent's R-by.

 drivers/media/platform/cadence/cdns-csi2rx.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
diff mbox series

Patch

diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c
index afd4a0da8235..baf8ec649a25 100644
--- a/drivers/media/platform/cadence/cdns-csi2rx.c
+++ b/drivers/media/platform/cadence/cdns-csi2rx.c
@@ -39,6 +39,7 @@ 
 #define CSI2RX_STREAM_BASE(n)		(((n) + 1) * 0x100)
 
 #define CSI2RX_STREAM_CTRL_REG(n)		(CSI2RX_STREAM_BASE(n) + 0x000)
+#define CSI2RX_STREAM_CTRL_SOFT_RST			BIT(4)
 #define CSI2RX_STREAM_CTRL_START			BIT(0)
 
 #define CSI2RX_STREAM_DATA_CFG_REG(n)		(CSI2RX_STREAM_BASE(n) + 0x008)
@@ -135,12 +136,22 @@  struct csi2rx_priv *v4l2_subdev_to_csi2rx(struct v4l2_subdev *subdev)
 
 static void csi2rx_reset(struct csi2rx_priv *csi2rx)
 {
+	unsigned int i;
+
 	writel(CSI2RX_SOFT_RESET_PROTOCOL | CSI2RX_SOFT_RESET_FRONT,
 	       csi2rx->base + CSI2RX_SOFT_RESET_REG);
 
 	udelay(10);
 
 	writel(0, csi2rx->base + CSI2RX_SOFT_RESET_REG);
+
+	/* Reset individual streams. */
+	for (i = 0; i < csi2rx->max_streams; i++) {
+		writel(CSI2RX_STREAM_CTRL_SOFT_RST,
+		       csi2rx->base + CSI2RX_STREAM_CTRL_REG(i));
+		usleep_range(10, 20);
+		writel(0, csi2rx->base + CSI2RX_STREAM_CTRL_REG(i));
+	}
 }
 
 static int csi2rx_configure_external_dphy(struct csi2rx_priv *csi2rx)