diff mbox series

[9/9] mtd: rawnand: brcmnand: Add BCMA shim

Message ID 20211223002225.3738385-10-f.fainelli@gmail.com
State New
Headers show
Series BCMA support for brcmnand | expand

Commit Message

Florian Fainelli Dec. 23, 2021, 12:22 a.m. UTC
Add a BCMA shim to allow us to register the brcmnand driver using the
BCMA bus which provides indirect memory mapped access to SoC registers.

There are a number of registers that need to be byte swapped because
they are natively big endian, coming directly from the NAND chip, and
there is no bus interface unlike the iProc or STB platforms that
performs the byte swapping for us.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/mtd/nand/raw/Kconfig              |  11 ++
 drivers/mtd/nand/raw/brcmnand/Makefile    |   2 +
 drivers/mtd/nand/raw/brcmnand/bcma_nand.c | 131 ++++++++++++++++++++++
 3 files changed, 144 insertions(+)
 create mode 100644 drivers/mtd/nand/raw/brcmnand/bcma_nand.c

Comments

Miquel Raynal Jan. 3, 2022, 5:06 p.m. UTC | #1
Hi Florian,

f.fainelli@gmail.com wrote on Wed, 22 Dec 2021 16:22:25 -0800:

> Add a BCMA shim to allow us to register the brcmnand driver using the
> BCMA bus which provides indirect memory mapped access to SoC registers.
> 
> There are a number of registers that need to be byte swapped because
> they are natively big endian, coming directly from the NAND chip, and
> there is no bus interface unlike the iProc or STB platforms that
> performs the byte swapping for us.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  drivers/mtd/nand/raw/Kconfig              |  11 ++
>  drivers/mtd/nand/raw/brcmnand/Makefile    |   2 +
>  drivers/mtd/nand/raw/brcmnand/bcma_nand.c | 131 ++++++++++++++++++++++
>  3 files changed, 144 insertions(+)
>  create mode 100644 drivers/mtd/nand/raw/brcmnand/bcma_nand.c
> 
> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
> index 0a45d3c6c15b..f643e02e5559 100644
> --- a/drivers/mtd/nand/raw/Kconfig
> +++ b/drivers/mtd/nand/raw/Kconfig
> @@ -208,6 +208,17 @@ config MTD_NAND_BRCMNAND
>  	  originally designed for Set-Top Box but is used on various BCM7xxx,
>  	  BCM3xxx, BCM63xxx, iProc/Cygnus and more.
>  
> +if MTD_NAND_BRCMNAND
> +
> +config MTD_NAND_BRCMNAND_BCMA
> +	tristate "Broadcom BCMA NAND controller"
> +	depends on BCMA_NFLASH
> +	depends on BCMA
> +	help
> +	  Enables the BRCMNAND controller over BCMA on BCM47186/BCM5358 SoCs.
> +
> +endif # MTD_NAND_BRCMNAND
> +
>  config MTD_NAND_BCM47XXNFLASH
>  	tristate "BCM4706 BCMA NAND controller"
>  	depends on BCMA_NFLASH
> diff --git a/drivers/mtd/nand/raw/brcmnand/Makefile b/drivers/mtd/nand/raw/brcmnand/Makefile
> index 195b845e48b8..16dc7254200e 100644
> --- a/drivers/mtd/nand/raw/brcmnand/Makefile
> +++ b/drivers/mtd/nand/raw/brcmnand/Makefile
> @@ -6,3 +6,5 @@ obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= bcm63138_nand.o
>  obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= bcm6368_nand.o
>  obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmstb_nand.o
>  obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmnand.o
> +
> +obj-$(CONFIG_MTD_NAND_BRCMNAND_BCMA)	+= bcma_nand.o
> diff --git a/drivers/mtd/nand/raw/brcmnand/bcma_nand.c b/drivers/mtd/nand/raw/brcmnand/bcma_nand.c
> new file mode 100644
> index 000000000000..e3be9ecf0761
> --- /dev/null
> +++ b/drivers/mtd/nand/raw/brcmnand/bcma_nand.c
> @@ -0,0 +1,131 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright © 2021 Broadcom
> + */
> +#include <linux/bcma/bcma.h>
> +#include <linux/bcma/bcma_driver_chipcommon.h>
> +#include <linux/device.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/platform_device.h>
> +
> +#include "brcmnand.h"
> +
> +struct brcmnand_bcma_soc {
> +	struct brcmnand_soc soc;
> +	struct bcma_drv_cc *cc;
> +};
> +
> +static inline bool brcmnand_bcma_needs_swapping(u32 offset)
> +{
> +	switch (offset) {
> +	case BCMA_CC_NAND_SPARE_RD0:
> +	case BCMA_CC_NAND_SPARE_RD4:
> +	case BCMA_CC_NAND_SPARE_RD8:
> +	case BCMA_CC_NAND_SPARE_RD12:
> +	case BCMA_CC_NAND_SPARE_WR0:
> +	case BCMA_CC_NAND_SPARE_WR4:
> +	case BCMA_CC_NAND_SPARE_WR8:
> +	case BCMA_CC_NAND_SPARE_WR12:
> +	case BCMA_CC_NAND_DEVID:
> +	case BCMA_CC_NAND_DEVID_X:
> +	case BCMA_CC_NAND_SPARE_RD16:
> +	case BCMA_CC_NAND_SPARE_RD20:
> +	case BCMA_CC_NAND_SPARE_RD24:
> +	case BCMA_CC_NAND_SPARE_RD28:
> +		return true;
> +	}
> +
> +	return false;
> +}
> +
> +static u32 brcmnand_bcma_read_reg(struct brcmnand_soc *soc, u32 offset)
> +{
> +	struct brcmnand_bcma_soc *sc;
> +	u32 val;
> +
> +	sc = container_of(soc, struct brcmnand_bcma_soc, soc);
> +
> +	/* Offset into the NAND block and deal with the flash cache separately */
> +	if (offset == ~0)
> +		offset = BCMA_CC_NAND_CACHE_DATA;
> +	else
> +		offset += BCMA_CC_NAND_REVISION;
> +
> +	val = bcma_cc_read32(sc->cc, offset);
> +
> +	/* Swap if necessary */
> +	if (brcmnand_bcma_needs_swapping(offset))
> +		val = be32_to_cpu(val);
> +	return val;
> +}
> +
> +static void brcmnand_bcma_write_reg(struct brcmnand_soc *soc, u32 val,
> +				    u32 offset)
> +{
> +	struct brcmnand_bcma_soc *sc;
> +
> +	sc = container_of(soc, struct brcmnand_bcma_soc, soc);
> +
> +	/* Offset into the NAND block */
> +	if (offset == ~0)
> +		offset = BCMA_CC_NAND_CACHE_DATA;
> +	else
> +		offset += BCMA_CC_NAND_REVISION;
> +
> +	/* Swap if necessary */
> +	if (brcmnand_bcma_needs_swapping(offset))
> +		val = cpu_to_be32(val);
> +
> +	bcma_cc_write32(sc->cc, offset, val);
> +}
> +
> +static struct brcmnand_io_ops brcmnand_bcma_io_ops = {
> +	.read_reg	= brcmnand_bcma_read_reg,
> +	.write_reg	= brcmnand_bcma_write_reg,
> +};
> +
> +static void brcmnand_bcma_prepare_data_bus(struct brcmnand_soc *soc, bool prepare,
> +					   bool is_param)
> +{
> +	struct brcmnand_bcma_soc *sc;
> +
> +	sc = container_of(soc, struct brcmnand_bcma_soc, soc);

A helper for that would be nice?

Otherwise looks good.

> +
> +	bcma_cc_write32(sc->cc, BCMA_CC_NAND_CACHE_ADDR, 0);
> +}
> +
> +static int brcmnand_bcma_nand_probe(struct platform_device *pdev)
> +{
> +	struct bcma_nflash *nflash = dev_get_platdata(&pdev->dev);
> +	struct brcmnand_bcma_soc *soc;
> +
> +	soc = devm_kzalloc(&pdev->dev, sizeof(*soc), GFP_KERNEL);
> +	if (!soc)
> +		return -ENOMEM;
> +
> +	soc->cc = container_of(nflash, struct bcma_drv_cc, nflash);
> +	soc->soc.prepare_data_bus = brcmnand_bcma_prepare_data_bus;
> +	soc->soc.ops = &brcmnand_bcma_io_ops;
> +
> +	if (soc->cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
> +		dev_err(&pdev->dev, "Use bcm47xxnflash for 4706!\n");
> +		return -ENODEV;
> +	}
> +
> +	return brcmnand_probe(pdev, &soc->soc);
> +}
> +
> +static struct platform_driver brcmnand_bcma_nand_driver = {
> +	.probe			= brcmnand_bcma_nand_probe,
> +	.remove			= brcmnand_remove,
> +	.driver = {
> +		.name		= "bcma_brcmnand",
> +		.pm		= &brcmnand_pm_ops,
> +	}
> +};
> +module_platform_driver(brcmnand_bcma_nand_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Braodcom");
> +MODULE_DESCRIPTION("NAND driver for BCMA chips");


Thanks,
Miquèl
Miquel Raynal Jan. 3, 2022, 5:12 p.m. UTC | #2
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Braodcom");

Small typo here :)

> +MODULE_DESCRIPTION("NAND driver for BCMA chips");

NAND controller driver, I want to enforce this *controller* word
because NAND is way too vague and refers to nothing specific.

Plus, it's not really a controller driver that we have here, more like
a glue interface.

Thanks,
Miquèl
Florian Fainelli Jan. 3, 2022, 5:28 p.m. UTC | #3
On 1/3/2022 9:12 AM, Miquel Raynal wrote:
> 
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_AUTHOR("Braodcom");
> 
> Small typo here :)

Whoops

> 
>> +MODULE_DESCRIPTION("NAND driver for BCMA chips");
> 
> NAND controller driver, I want to enforce this *controller* word
> because NAND is way too vague and refers to nothing specific.
> 
> Plus, it's not really a controller driver that we have here, more like
> a glue interface.

Certainly, thanks!
Florian Fainelli Jan. 3, 2022, 5:28 p.m. UTC | #4
On 1/3/2022 9:06 AM, Miquel Raynal wrote:
> Hi Florian,
> 
> f.fainelli@gmail.com wrote on Wed, 22 Dec 2021 16:22:25 -0800:
> 
>> Add a BCMA shim to allow us to register the brcmnand driver using the
>> BCMA bus which provides indirect memory mapped access to SoC registers.
>>
>> There are a number of registers that need to be byte swapped because
>> they are natively big endian, coming directly from the NAND chip, and
>> there is no bus interface unlike the iProc or STB platforms that
>> performs the byte swapping for us.
>>
>> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
>> ---
>>   drivers/mtd/nand/raw/Kconfig              |  11 ++
>>   drivers/mtd/nand/raw/brcmnand/Makefile    |   2 +
>>   drivers/mtd/nand/raw/brcmnand/bcma_nand.c | 131 ++++++++++++++++++++++
>>   3 files changed, 144 insertions(+)
>>   create mode 100644 drivers/mtd/nand/raw/brcmnand/bcma_nand.c
>>
>> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
>> index 0a45d3c6c15b..f643e02e5559 100644
>> --- a/drivers/mtd/nand/raw/Kconfig
>> +++ b/drivers/mtd/nand/raw/Kconfig
>> @@ -208,6 +208,17 @@ config MTD_NAND_BRCMNAND
>>   	  originally designed for Set-Top Box but is used on various BCM7xxx,
>>   	  BCM3xxx, BCM63xxx, iProc/Cygnus and more.
>>   
>> +if MTD_NAND_BRCMNAND
>> +
>> +config MTD_NAND_BRCMNAND_BCMA
>> +	tristate "Broadcom BCMA NAND controller"
>> +	depends on BCMA_NFLASH
>> +	depends on BCMA
>> +	help
>> +	  Enables the BRCMNAND controller over BCMA on BCM47186/BCM5358 SoCs.
>> +
>> +endif # MTD_NAND_BRCMNAND
>> +
>>   config MTD_NAND_BCM47XXNFLASH
>>   	tristate "BCM4706 BCMA NAND controller"
>>   	depends on BCMA_NFLASH
>> diff --git a/drivers/mtd/nand/raw/brcmnand/Makefile b/drivers/mtd/nand/raw/brcmnand/Makefile
>> index 195b845e48b8..16dc7254200e 100644
>> --- a/drivers/mtd/nand/raw/brcmnand/Makefile
>> +++ b/drivers/mtd/nand/raw/brcmnand/Makefile
>> @@ -6,3 +6,5 @@ obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= bcm63138_nand.o
>>   obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= bcm6368_nand.o
>>   obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmstb_nand.o
>>   obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmnand.o
>> +
>> +obj-$(CONFIG_MTD_NAND_BRCMNAND_BCMA)	+= bcma_nand.o
>> diff --git a/drivers/mtd/nand/raw/brcmnand/bcma_nand.c b/drivers/mtd/nand/raw/brcmnand/bcma_nand.c
>> new file mode 100644
>> index 000000000000..e3be9ecf0761
>> --- /dev/null
>> +++ b/drivers/mtd/nand/raw/brcmnand/bcma_nand.c
>> @@ -0,0 +1,131 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright © 2021 Broadcom
>> + */
>> +#include <linux/bcma/bcma.h>
>> +#include <linux/bcma/bcma_driver_chipcommon.h>
>> +#include <linux/device.h>
>> +#include <linux/module.h>
>> +#include <linux/mod_devicetable.h>
>> +#include <linux/platform_device.h>
>> +
>> +#include "brcmnand.h"
>> +
>> +struct brcmnand_bcma_soc {
>> +	struct brcmnand_soc soc;
>> +	struct bcma_drv_cc *cc;
>> +};
>> +
>> +static inline bool brcmnand_bcma_needs_swapping(u32 offset)
>> +{
>> +	switch (offset) {
>> +	case BCMA_CC_NAND_SPARE_RD0:
>> +	case BCMA_CC_NAND_SPARE_RD4:
>> +	case BCMA_CC_NAND_SPARE_RD8:
>> +	case BCMA_CC_NAND_SPARE_RD12:
>> +	case BCMA_CC_NAND_SPARE_WR0:
>> +	case BCMA_CC_NAND_SPARE_WR4:
>> +	case BCMA_CC_NAND_SPARE_WR8:
>> +	case BCMA_CC_NAND_SPARE_WR12:
>> +	case BCMA_CC_NAND_DEVID:
>> +	case BCMA_CC_NAND_DEVID_X:
>> +	case BCMA_CC_NAND_SPARE_RD16:
>> +	case BCMA_CC_NAND_SPARE_RD20:
>> +	case BCMA_CC_NAND_SPARE_RD24:
>> +	case BCMA_CC_NAND_SPARE_RD28:
>> +		return true;
>> +	}
>> +
>> +	return false;
>> +}
>> +
>> +static u32 brcmnand_bcma_read_reg(struct brcmnand_soc *soc, u32 offset)
>> +{
>> +	struct brcmnand_bcma_soc *sc;
>> +	u32 val;
>> +
>> +	sc = container_of(soc, struct brcmnand_bcma_soc, soc);
>> +
>> +	/* Offset into the NAND block and deal with the flash cache separately */
>> +	if (offset == ~0)
>> +		offset = BCMA_CC_NAND_CACHE_DATA;
>> +	else
>> +		offset += BCMA_CC_NAND_REVISION;
>> +
>> +	val = bcma_cc_read32(sc->cc, offset);
>> +
>> +	/* Swap if necessary */
>> +	if (brcmnand_bcma_needs_swapping(offset))
>> +		val = be32_to_cpu(val);
>> +	return val;
>> +}
>> +
>> +static void brcmnand_bcma_write_reg(struct brcmnand_soc *soc, u32 val,
>> +				    u32 offset)
>> +{
>> +	struct brcmnand_bcma_soc *sc;
>> +
>> +	sc = container_of(soc, struct brcmnand_bcma_soc, soc);
>> +
>> +	/* Offset into the NAND block */
>> +	if (offset == ~0)
>> +		offset = BCMA_CC_NAND_CACHE_DATA;
>> +	else
>> +		offset += BCMA_CC_NAND_REVISION;
>> +
>> +	/* Swap if necessary */
>> +	if (brcmnand_bcma_needs_swapping(offset))
>> +		val = cpu_to_be32(val);
>> +
>> +	bcma_cc_write32(sc->cc, offset, val);
>> +}
>> +
>> +static struct brcmnand_io_ops brcmnand_bcma_io_ops = {
>> +	.read_reg	= brcmnand_bcma_read_reg,
>> +	.write_reg	= brcmnand_bcma_write_reg,
>> +};
>> +
>> +static void brcmnand_bcma_prepare_data_bus(struct brcmnand_soc *soc, bool prepare,
>> +					   bool is_param)
>> +{
>> +	struct brcmnand_bcma_soc *sc;
>> +
>> +	sc = container_of(soc, struct brcmnand_bcma_soc, soc);
> 
> A helper for that would be nice?

Sure, I can add a helper since we use the same construct about 3 times, 
thanks!
diff mbox series

Patch

diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 0a45d3c6c15b..f643e02e5559 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -208,6 +208,17 @@  config MTD_NAND_BRCMNAND
 	  originally designed for Set-Top Box but is used on various BCM7xxx,
 	  BCM3xxx, BCM63xxx, iProc/Cygnus and more.
 
+if MTD_NAND_BRCMNAND
+
+config MTD_NAND_BRCMNAND_BCMA
+	tristate "Broadcom BCMA NAND controller"
+	depends on BCMA_NFLASH
+	depends on BCMA
+	help
+	  Enables the BRCMNAND controller over BCMA on BCM47186/BCM5358 SoCs.
+
+endif # MTD_NAND_BRCMNAND
+
 config MTD_NAND_BCM47XXNFLASH
 	tristate "BCM4706 BCMA NAND controller"
 	depends on BCMA_NFLASH
diff --git a/drivers/mtd/nand/raw/brcmnand/Makefile b/drivers/mtd/nand/raw/brcmnand/Makefile
index 195b845e48b8..16dc7254200e 100644
--- a/drivers/mtd/nand/raw/brcmnand/Makefile
+++ b/drivers/mtd/nand/raw/brcmnand/Makefile
@@ -6,3 +6,5 @@  obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= bcm63138_nand.o
 obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= bcm6368_nand.o
 obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmstb_nand.o
 obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmnand.o
+
+obj-$(CONFIG_MTD_NAND_BRCMNAND_BCMA)	+= bcma_nand.o
diff --git a/drivers/mtd/nand/raw/brcmnand/bcma_nand.c b/drivers/mtd/nand/raw/brcmnand/bcma_nand.c
new file mode 100644
index 000000000000..e3be9ecf0761
--- /dev/null
+++ b/drivers/mtd/nand/raw/brcmnand/bcma_nand.c
@@ -0,0 +1,131 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright © 2021 Broadcom
+ */
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_driver_chipcommon.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+
+#include "brcmnand.h"
+
+struct brcmnand_bcma_soc {
+	struct brcmnand_soc soc;
+	struct bcma_drv_cc *cc;
+};
+
+static inline bool brcmnand_bcma_needs_swapping(u32 offset)
+{
+	switch (offset) {
+	case BCMA_CC_NAND_SPARE_RD0:
+	case BCMA_CC_NAND_SPARE_RD4:
+	case BCMA_CC_NAND_SPARE_RD8:
+	case BCMA_CC_NAND_SPARE_RD12:
+	case BCMA_CC_NAND_SPARE_WR0:
+	case BCMA_CC_NAND_SPARE_WR4:
+	case BCMA_CC_NAND_SPARE_WR8:
+	case BCMA_CC_NAND_SPARE_WR12:
+	case BCMA_CC_NAND_DEVID:
+	case BCMA_CC_NAND_DEVID_X:
+	case BCMA_CC_NAND_SPARE_RD16:
+	case BCMA_CC_NAND_SPARE_RD20:
+	case BCMA_CC_NAND_SPARE_RD24:
+	case BCMA_CC_NAND_SPARE_RD28:
+		return true;
+	}
+
+	return false;
+}
+
+static u32 brcmnand_bcma_read_reg(struct brcmnand_soc *soc, u32 offset)
+{
+	struct brcmnand_bcma_soc *sc;
+	u32 val;
+
+	sc = container_of(soc, struct brcmnand_bcma_soc, soc);
+
+	/* Offset into the NAND block and deal with the flash cache separately */
+	if (offset == ~0)
+		offset = BCMA_CC_NAND_CACHE_DATA;
+	else
+		offset += BCMA_CC_NAND_REVISION;
+
+	val = bcma_cc_read32(sc->cc, offset);
+
+	/* Swap if necessary */
+	if (brcmnand_bcma_needs_swapping(offset))
+		val = be32_to_cpu(val);
+	return val;
+}
+
+static void brcmnand_bcma_write_reg(struct brcmnand_soc *soc, u32 val,
+				    u32 offset)
+{
+	struct brcmnand_bcma_soc *sc;
+
+	sc = container_of(soc, struct brcmnand_bcma_soc, soc);
+
+	/* Offset into the NAND block */
+	if (offset == ~0)
+		offset = BCMA_CC_NAND_CACHE_DATA;
+	else
+		offset += BCMA_CC_NAND_REVISION;
+
+	/* Swap if necessary */
+	if (brcmnand_bcma_needs_swapping(offset))
+		val = cpu_to_be32(val);
+
+	bcma_cc_write32(sc->cc, offset, val);
+}
+
+static struct brcmnand_io_ops brcmnand_bcma_io_ops = {
+	.read_reg	= brcmnand_bcma_read_reg,
+	.write_reg	= brcmnand_bcma_write_reg,
+};
+
+static void brcmnand_bcma_prepare_data_bus(struct brcmnand_soc *soc, bool prepare,
+					   bool is_param)
+{
+	struct brcmnand_bcma_soc *sc;
+
+	sc = container_of(soc, struct brcmnand_bcma_soc, soc);
+
+	bcma_cc_write32(sc->cc, BCMA_CC_NAND_CACHE_ADDR, 0);
+}
+
+static int brcmnand_bcma_nand_probe(struct platform_device *pdev)
+{
+	struct bcma_nflash *nflash = dev_get_platdata(&pdev->dev);
+	struct brcmnand_bcma_soc *soc;
+
+	soc = devm_kzalloc(&pdev->dev, sizeof(*soc), GFP_KERNEL);
+	if (!soc)
+		return -ENOMEM;
+
+	soc->cc = container_of(nflash, struct bcma_drv_cc, nflash);
+	soc->soc.prepare_data_bus = brcmnand_bcma_prepare_data_bus;
+	soc->soc.ops = &brcmnand_bcma_io_ops;
+
+	if (soc->cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
+		dev_err(&pdev->dev, "Use bcm47xxnflash for 4706!\n");
+		return -ENODEV;
+	}
+
+	return brcmnand_probe(pdev, &soc->soc);
+}
+
+static struct platform_driver brcmnand_bcma_nand_driver = {
+	.probe			= brcmnand_bcma_nand_probe,
+	.remove			= brcmnand_remove,
+	.driver = {
+		.name		= "bcma_brcmnand",
+		.pm		= &brcmnand_pm_ops,
+	}
+};
+module_platform_driver(brcmnand_bcma_nand_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Braodcom");
+MODULE_DESCRIPTION("NAND driver for BCMA chips");