diff mbox series

dt-bindings: mfd: convert to yaml Qualcomm SPMI PMIC

Message ID 20211227215433.114426-1-david@ixit.cz
State Superseded
Headers show
Series dt-bindings: mfd: convert to yaml Qualcomm SPMI PMIC | expand

Commit Message

David Heidelberg Dec. 27, 2021, 9:54 p.m. UTC
From: Caleb Connolly <caleb.connolly@linaro.org>

Convert Qualcomm SPMI PMIC binding to yaml format.

Additional changes:
 - filled many missing compatibles

Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
---
depends on patch "arm64: dts: qcom: pms405: assign device specific compatible"
---
 .../bindings/mfd/qcom,spmi-pmic.txt           |  93 -----------
 .../bindings/mfd/qcom,spmi-pmic.yaml          | 152 ++++++++++++++++++
 2 files changed, 152 insertions(+), 93 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml

Comments

Lee Jones Dec. 29, 2021, 9:48 a.m. UTC | #1
On Mon, 27 Dec 2021, David Heidelberg wrote:

> From: Caleb Connolly <caleb.connolly@linaro.org>
> 
> Convert Qualcomm SPMI PMIC binding to yaml format.
> 
> Additional changes:
>  - filled many missing compatibles
> 
> Co-developed-by: David Heidelberg <david@ixit.cz>
> Signed-off-by: David Heidelberg <david@ixit.cz>

I must admit, I'm a bit hazy on the details, but this looks odd to
me.  Shouldn't this have Caleb's SoB too?  Also, if you apply your
SoB, I'm not sure you also need to apply a CDB as well?

> ---
> depends on patch "arm64: dts: qcom: pms405: assign device specific compatible"
> ---
>  .../bindings/mfd/qcom,spmi-pmic.txt           |  93 -----------
>  .../bindings/mfd/qcom,spmi-pmic.yaml          | 152 ++++++++++++++++++
>  2 files changed, 152 insertions(+), 93 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
>  create mode 100644 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> deleted file mode 100644
> index 3810a80536f7..000000000000
> --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> +++ /dev/null
> @@ -1,93 +0,0 @@
> -          Qualcomm SPMI PMICs multi-function device bindings
> -
> -The Qualcomm SPMI series presently includes PM8941, PM8841 and PMA8084
> -PMICs.  These PMICs use a QPNP scheme through SPMI interface.
> -QPNP is effectively a partitioning scheme for dividing the SPMI extended
> -register space up into logical pieces, and set of fixed register
> -locations/definitions within these regions, with some of these regions
> -specifically used for interrupt handling.
> -
> -The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are
> -interfaced to the chip via the SPMI (System Power Management Interface) bus.
> -Support for multiple independent functions are implemented by splitting the
> -16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes
> -each. A function can consume one or more of these fixed-size register regions.
> -
> -Required properties:
> -- compatible:      Should contain one of:
> -                   "qcom,pm660",
> -                   "qcom,pm660l",
> -                   "qcom,pm7325",
> -                   "qcom,pm8004",
> -                   "qcom,pm8005",
> -                   "qcom,pm8019",
> -                   "qcom,pm8028",
> -                   "qcom,pm8110",
> -                   "qcom,pm8150",
> -                   "qcom,pm8150b",
> -                   "qcom,pm8150c",
> -                   "qcom,pm8150l",
> -                   "qcom,pm8226",
> -                   "qcom,pm8350c",
> -                   "qcom,pm8841",
> -                   "qcom,pm8901",
> -                   "qcom,pm8909",
> -                   "qcom,pm8916",
> -                   "qcom,pm8941",
> -                   "qcom,pm8950",
> -                   "qcom,pm8994",
> -                   "qcom,pm8998",
> -                   "qcom,pma8084",
> -                   "qcom,pmd9635",
> -                   "qcom,pmi8950",
> -                   "qcom,pmi8962",
> -                   "qcom,pmi8994",
> -                   "qcom,pmi8998",
> -                   "qcom,pmk8002",
> -                   "qcom,pmk8350",
> -                   "qcom,pmr735a",
> -                   "qcom,smb2351",
> -                   or generalized "qcom,spmi-pmic".
> -- reg:             Specifies the SPMI USID slave address for this device.
> -                   For more information see:
> -                   Documentation/devicetree/bindings/spmi/spmi.yaml
> -
> -Required properties for peripheral child nodes:
> -- compatible:      Should contain "qcom,xxx", where "xxx" is a peripheral name.
> -
> -Optional properties for peripheral child nodes:
> -- interrupts:      Interrupts are specified as a 4-tuple. For more information
> -                   see:
> -                   Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
> -- interrupt-names: Corresponding interrupt name to the interrupts property
> -
> -Each child node of SPMI slave id represents a function of the PMIC. In the
> -example below the rtc device node represents a peripheral of pm8941
> -SID = 0. The regulator device node represents a peripheral of pm8941 SID = 1.
> -
> -Example:
> -
> -	spmi {
> -		compatible = "qcom,spmi-pmic-arb";
> -
> -		pm8941@0 {
> -			compatible = "qcom,pm8941", "qcom,spmi-pmic";
> -			reg = <0x0 SPMI_USID>;
> -
> -			rtc {
> -				compatible = "qcom,rtc";
> -				interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
> -				interrupt-names = "alarm";
> -			};
> -		};
> -
> -		pm8941@1 {
> -			compatible = "qcom,pm8941", "qcom,spmi-pmic";
> -			reg = <0x1 SPMI_USID>;
> -
> -			regulator {
> -				compatible = "qcom,regulator";
> -				regulator-name = "8941_boost";
> -			};
> -		};
> -	};
> diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
> new file mode 100644
> index 000000000000..11aa2c61eded
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
> @@ -0,0 +1,152 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SPMI PMICs multi-function device
> +
> +description: |
> +  Some Qualcomm PMICs used with the Snapdragon series SoCs are interfaced
> +  to the chip via the SPMI (System Power Management Interface) bus.
> +  Support for multiple independent functions are implemented by splitting the
> +  16-bit SPMI peripheral address space into 256 smaller fixed-size regions, 256 bytes
> +  each. A function can consume one or more of these fixed-size register regions.
> +
> +  The Qualcomm SPMI series includes the PM8941, PM8841, PMA8084, PM8998 and other
> +  PMICs.  These PMICs use a "QPNP" scheme through SPMI interface.
> +  QPNP is effectively a partitioning scheme for dividing the SPMI extended
> +  register space up into logical pieces, and set of fixed register
> +  locations/definitions within these regions, with some of these regions
> +  specifically used for interrupt handling.
> +
> +maintainers:
> +  - Stephen Boyd <sboyd@kernel.org>
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - qcom,pm660
> +          - qcom,pm660l
> +          - qcom,pm6150
> +          - qcom,pm6150l
> +          - qcom,pm6350
> +          - qcom,pm7325
> +          - qcom,pm8004
> +          - qcom,pm8005
> +          - qcom,pm8009
> +          - qcom,pm8019
> +          - qcom,pm8110
> +          - qcom,pm8150
> +          - qcom,pm8150b
> +          - qcom,pm8150l
> +          - qcom,pm8226
> +          - qcom,pm8350
> +          - qcom,pm8350b
> +          - qcom,pm8350c
> +          - qcom,pm8841
> +          - qcom,pm8909
> +          - qcom,pm8916
> +          - qcom,pm8941
> +          - qcom,pm8950
> +          - qcom,pm8994
> +          - qcom,pm8998
> +          - qcom,pma8084
> +          - qcom,pmd9635
> +          - qcom,pmi8950
> +          - qcom,pmi8962
> +          - qcom,pmi8994
> +          - qcom,pmi8998
> +          - qcom,pmk8350
> +          - qcom,pmm8155au
> +          - qcom,pmr735a
> +          - qcom,pmr735b
> +          - qcom,pms405
> +          - qcom,smb2351
> +      - const: qcom,spmi-pmic
> +
> +  reg: true
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +
> +patternProperties:
> +  $nodename:
> +    pattern: '^pmic@.*$'
> +
> +  '(labibb|([a-z][a-z0-9]+-)?regulators)':
> +    type: object
> +
> +    required:
> +      - compatible
> +
> +  '@[0-9a-f]+$':
> +    type: object
> +    description: >
> +      Each child node of the PMIC represents a function of it.
> +
> +    properties:
> +      interrupts:
> +        description: >
> +          Interrupts are specified as a 4-tuple. For more information see
> +          Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
> +
> +      interrupt-names: true
> +
> +    required:
> +      - compatible
> +
> +    additionalProperties: true
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/spmi/spmi.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    spmi@c440000 {
> +        compatible = "qcom,spmi-pmic-arb";
> +        reg = <0x0c440000 0x1100>,
> +              <0x0c600000 0x2000000>,
> +              <0x0e600000 0x100000>,
> +              <0x0e700000 0xa0000>,
> +              <0x0c40a000 0x26000>;
> +        reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> +        interrupt-names = "periph_irq";
> +        interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
> +        qcom,ee = <0>;
> +        qcom,channel = <0>;
> +        #address-cells = <2>;
> +        #size-cells = <0>;
> +        interrupt-controller;
> +        #interrupt-cells = <4>;
> +        cell-index = <0>;
> +
> +        pmi8998_lsid0: pmic@2 {
> +            compatible = "qcom,pmi8998", "qcom,spmi-pmic";
> +            reg = <0x2 SPMI_USID>;
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            pmi8998_gpio: gpios@c000 {
> +                compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
> +                reg = <0xc000>;
> +                gpio-controller;
> +                gpio-ranges = <&pmi8998_gpio 0 0 14>;
> +                #gpio-cells = <2>;
> +                interrupt-controller;
> +                #interrupt-cells = <2>;
> +            };
> +        };
> +    };
Lee Jones Dec. 29, 2021, 10:20 a.m. UTC | #2
On Wed, 29 Dec 2021, Caleb Connolly wrote:

> On Wed, 29 Dec 2021, 09:48 Lee Jones, <lee.jones@linaro.org> wrote:
> 
> > On Mon, 27 Dec 2021, David Heidelberg wrote:
> >
> > > From: Caleb Connolly <caleb.connolly@linaro.org>
> > >
> > > Convert Qualcomm SPMI PMIC binding to yaml format.
> > >
> > > Additional changes:
> > >  - filled many missing compatibles
> > >
> > > Co-developed-by: David Heidelberg <david@ixit.cz>
> > > Signed-off-by: David Heidelberg <david@ixit.cz>
> >
> > I must admit, I'm a bit hazy on the details, but this looks odd to
> > me.  Shouldn't this have Caleb's SoB too?  Also, if you apply your
> > SoB, I'm not sure you also need to apply a CDB as well?
> >
> Yeah, this should not be from me, I did originally work on this patch but
> wasn't able to finish it. David perhaps resend with yourself as the patch
> author and add
> Co-developed-by: Caleb Connolly <caleb@connolly.tech>

That would make more sense.

> (either way, it shouldn't have been authored by my @linaro.org email
> address).
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
deleted file mode 100644
index 3810a80536f7..000000000000
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
+++ /dev/null
@@ -1,93 +0,0 @@ 
-          Qualcomm SPMI PMICs multi-function device bindings
-
-The Qualcomm SPMI series presently includes PM8941, PM8841 and PMA8084
-PMICs.  These PMICs use a QPNP scheme through SPMI interface.
-QPNP is effectively a partitioning scheme for dividing the SPMI extended
-register space up into logical pieces, and set of fixed register
-locations/definitions within these regions, with some of these regions
-specifically used for interrupt handling.
-
-The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are
-interfaced to the chip via the SPMI (System Power Management Interface) bus.
-Support for multiple independent functions are implemented by splitting the
-16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes
-each. A function can consume one or more of these fixed-size register regions.
-
-Required properties:
-- compatible:      Should contain one of:
-                   "qcom,pm660",
-                   "qcom,pm660l",
-                   "qcom,pm7325",
-                   "qcom,pm8004",
-                   "qcom,pm8005",
-                   "qcom,pm8019",
-                   "qcom,pm8028",
-                   "qcom,pm8110",
-                   "qcom,pm8150",
-                   "qcom,pm8150b",
-                   "qcom,pm8150c",
-                   "qcom,pm8150l",
-                   "qcom,pm8226",
-                   "qcom,pm8350c",
-                   "qcom,pm8841",
-                   "qcom,pm8901",
-                   "qcom,pm8909",
-                   "qcom,pm8916",
-                   "qcom,pm8941",
-                   "qcom,pm8950",
-                   "qcom,pm8994",
-                   "qcom,pm8998",
-                   "qcom,pma8084",
-                   "qcom,pmd9635",
-                   "qcom,pmi8950",
-                   "qcom,pmi8962",
-                   "qcom,pmi8994",
-                   "qcom,pmi8998",
-                   "qcom,pmk8002",
-                   "qcom,pmk8350",
-                   "qcom,pmr735a",
-                   "qcom,smb2351",
-                   or generalized "qcom,spmi-pmic".
-- reg:             Specifies the SPMI USID slave address for this device.
-                   For more information see:
-                   Documentation/devicetree/bindings/spmi/spmi.yaml
-
-Required properties for peripheral child nodes:
-- compatible:      Should contain "qcom,xxx", where "xxx" is a peripheral name.
-
-Optional properties for peripheral child nodes:
-- interrupts:      Interrupts are specified as a 4-tuple. For more information
-                   see:
-                   Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
-- interrupt-names: Corresponding interrupt name to the interrupts property
-
-Each child node of SPMI slave id represents a function of the PMIC. In the
-example below the rtc device node represents a peripheral of pm8941
-SID = 0. The regulator device node represents a peripheral of pm8941 SID = 1.
-
-Example:
-
-	spmi {
-		compatible = "qcom,spmi-pmic-arb";
-
-		pm8941@0 {
-			compatible = "qcom,pm8941", "qcom,spmi-pmic";
-			reg = <0x0 SPMI_USID>;
-
-			rtc {
-				compatible = "qcom,rtc";
-				interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
-				interrupt-names = "alarm";
-			};
-		};
-
-		pm8941@1 {
-			compatible = "qcom,pm8941", "qcom,spmi-pmic";
-			reg = <0x1 SPMI_USID>;
-
-			regulator {
-				compatible = "qcom,regulator";
-				regulator-name = "8941_boost";
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
new file mode 100644
index 000000000000..11aa2c61eded
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -0,0 +1,152 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI PMICs multi-function device
+
+description: |
+  Some Qualcomm PMICs used with the Snapdragon series SoCs are interfaced
+  to the chip via the SPMI (System Power Management Interface) bus.
+  Support for multiple independent functions are implemented by splitting the
+  16-bit SPMI peripheral address space into 256 smaller fixed-size regions, 256 bytes
+  each. A function can consume one or more of these fixed-size register regions.
+
+  The Qualcomm SPMI series includes the PM8941, PM8841, PMA8084, PM8998 and other
+  PMICs.  These PMICs use a "QPNP" scheme through SPMI interface.
+  QPNP is effectively a partitioning scheme for dividing the SPMI extended
+  register space up into logical pieces, and set of fixed register
+  locations/definitions within these regions, with some of these regions
+  specifically used for interrupt handling.
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,pm660
+          - qcom,pm660l
+          - qcom,pm6150
+          - qcom,pm6150l
+          - qcom,pm6350
+          - qcom,pm7325
+          - qcom,pm8004
+          - qcom,pm8005
+          - qcom,pm8009
+          - qcom,pm8019
+          - qcom,pm8110
+          - qcom,pm8150
+          - qcom,pm8150b
+          - qcom,pm8150l
+          - qcom,pm8226
+          - qcom,pm8350
+          - qcom,pm8350b
+          - qcom,pm8350c
+          - qcom,pm8841
+          - qcom,pm8909
+          - qcom,pm8916
+          - qcom,pm8941
+          - qcom,pm8950
+          - qcom,pm8994
+          - qcom,pm8998
+          - qcom,pma8084
+          - qcom,pmd9635
+          - qcom,pmi8950
+          - qcom,pmi8962
+          - qcom,pmi8994
+          - qcom,pmi8998
+          - qcom,pmk8350
+          - qcom,pmm8155au
+          - qcom,pmr735a
+          - qcom,pmr735b
+          - qcom,pms405
+          - qcom,smb2351
+      - const: qcom,spmi-pmic
+
+  reg: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+
+patternProperties:
+  $nodename:
+    pattern: '^pmic@.*$'
+
+  '(labibb|([a-z][a-z0-9]+-)?regulators)':
+    type: object
+
+    required:
+      - compatible
+
+  '@[0-9a-f]+$':
+    type: object
+    description: >
+      Each child node of the PMIC represents a function of it.
+
+    properties:
+      interrupts:
+        description: >
+          Interrupts are specified as a 4-tuple. For more information see
+          Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
+
+      interrupt-names: true
+
+    required:
+      - compatible
+
+    additionalProperties: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/spmi/spmi.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spmi@c440000 {
+        compatible = "qcom,spmi-pmic-arb";
+        reg = <0x0c440000 0x1100>,
+              <0x0c600000 0x2000000>,
+              <0x0e600000 0x100000>,
+              <0x0e700000 0xa0000>,
+              <0x0c40a000 0x26000>;
+        reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+        interrupt-names = "periph_irq";
+        interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+        qcom,ee = <0>;
+        qcom,channel = <0>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+        interrupt-controller;
+        #interrupt-cells = <4>;
+        cell-index = <0>;
+
+        pmi8998_lsid0: pmic@2 {
+            compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+            reg = <0x2 SPMI_USID>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pmi8998_gpio: gpios@c000 {
+                compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
+                reg = <0xc000>;
+                gpio-controller;
+                gpio-ranges = <&pmi8998_gpio 0 0 14>;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+        };
+    };