diff mbox series

[v3,9/9] ARM: dts: wpcm450: Add pinmux information to UART0

Message ID 20211224200935.93817-10-j.neuschaefer@gmx.net
State Superseded
Headers show
Series Nuvoton WPCM450 pinctrl and GPIO driver | expand

Commit Message

Jonathan Neuschäfer Dec. 24, 2021, 8:09 p.m. UTC 
UART0 always uses the same pins, so lets add the pinctrl information to
the common devicetree for WPCM450.

UART1 has different connection options, so I'm not adding the pinctrl
properties there.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---

v3:
- New patch
---
 arch/arm/boot/dts/nuvoton-wpcm450.dtsi | 2 ++
 1 file changed, 2 insertions(+)

--
2.30.2
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
index 0c547bd88bdbd..93595850a4c3c 100644
--- a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
@@ -55,6 +55,8 @@  serial0: serial@b8000000 {
 			reg-shift = <2>;
 			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk24m>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&bsp_pins>;
 			status = "disabled";
 		};